The paper presents results of investigation of the influence of mechanical activation of shungite, a Russian natural mineral rich in silica and carbon, on its sintering behavior. The mechanical activation of the starting powder was performed in a high-energy ball mill in time intervals from 0 to 480 minutes. The phase composition of the starting mixtures and sintered samples was analyzed by the X-ray diffraction method. The scanning electron microscopy was performed in order to determine changes in the microstructure. Sintering was performed at various temperatures for 2 h, in an Ar and vacuum atmosphere. Dielectric properties of the sintered samples were measured in the frequency range from 1 to 500 MHz. The obtained results indicate that sintered shungite powder is a good candidate for applications as an absorber of electromagnetic waves in microwave engineering
