SIGNAL-TO-NOISE RATIO PERFORMANCE OF THE SAWTOOTH PHASE DETECTOR WHEN DEMODULATING PM SUBCARRIERS

Abstract

International Telemetering Conference Proceedings / October 13-16, 1986 / Riviera Hotel, Las Vegas, NevadaThe noise performance of the sawtooth phase detector when demodulating a sinusoidal subcarrier plus direct data modulation is studied. At predetection signal-to-noise ratio (SNR) levels of about 10 dB or more, significant improvements in the postdetection SNR of the subcarrier can be obtained using the sawtooth detector rather than a linear multiplier. Below predetection SNR levels of about 10 dB, significant improvements can still be obtained; however, a threshold occurs and the performance degrades until leveling off at 3.2 dB worse than that of a linear multiplier. The predetection SNR level where the sawtooth detector performance becomes worse than that of a linear multiplier depends upon the subcarrier and direct data modulation indices. Performance curves are given between predetection SNR levels of -20 dB and +20 dB for various values of subcarrier modulation index and direct data modulation index.International Foundation for TelemeteringProceedings from the International Telemetering Conference are made available by the International Foundation for Telemetering and the University of Arizona Libraries. Visit http://www.telemetry.org/index.php/contact-us if you have questions about items in this collection

    Similar works