Deakin University, School of Engineering and Architecture
Abstract
This report presents the results of an analysis of three years of tide and meteorological data aimed at delineating the influences of atmospheric pressure, waves, onshore winds and longshore winds on coastal sea levels West of Port Phillip Bay, Victoria« The data was used to develop predictive and hindcasting techniques for meteorological tides on the Otway Coast, using statistical methods, an empirical method and a mathematical model. The nature and magnitude of contributions of the various components of the meteorological tide, and the general variability of monthly and seasonal variations were also studied. It was found that meteorological tides on the Otway Coast can account for significant sea level changes, with the main factors being wind and atmospheric pressure. The wind component of the meteorological tide was found to be approximately twice the pressure component, and longshore winds were found to be more significant than onshore winds for wind setup on the Otway Coast. The meteorological tide models developed enable estimates of wind setup and atmospheric pressure setup on the Otway Coast to be readily computed using data from synoptic charts. The wave setup component could not be separated from the meteorological tide and is included in the wind setup component. The results of the investigation are relevant to the design and maintenance of coastal engineering works, and point to the need for the establishment and operation of coastal management schemes on the Otway Coast