Albrechtsen, Hans-Jørgen

Lind, S.

Nielsen, P. B.

Smets, Barth F.

Tatari, Karolina

Online Research Database In Technology

                       General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.  • Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal   If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim.     Downloaded from orbit.dtu.dk on: Dec 20, 2017Effect of surface loading fluctuationson ammonium removal during rapid sandfiltrationTatari, Karolina; Smets, Barth F.; Nielsen, P. B.; Lind, S.; Albrechtsen, Hans-JørgenPublication date:2012Document VersionPublisher's PDF, also known as Version of recordLink back to DTU OrbitCitation (APA):Tatari, K., Smets, B. F., Nielsen, P. B., Lind, S., & Albrechtsen, H-J. (2012). Effect of surface loadingfluctuationson ammonium removal during rapid sand filtration. Poster session presented at 2012 Water QualityTechnology Conference and Exposition (WQTC), Toronot, Ontario, Canada.Effect of surface loading fluctuations on ammonium removal during rapid sand filtration Insert picture  of you here 10 x 8 cm Or Remove Karolina Tataria*, Barth F. Smetsa, Peter B. Nielsenb, Søren Lindc, Hans-Jørgen Albrechtsena  a Department of Environmental Engineering, Bygning 113, DTU, 2800, Lyngby, Denmark, b Krüger A/S Gladsaxevej 363 Søborg, 2860 Denmark, c Københavns Energi, Ørestads Boulevard 35, 2300 Copenhagen S., Denmark      *kaot@env.dtu.dk  Loading  (mg NH4+-N/ m2 sand surface area / h ) Duration of experiment (h) 0.4 steady state 1 5  2 4  4 3  Method Figure 4: Schematic drawing of experimental set-up. Column dimensions: 5 cm x 2.6 cm ø. Loading was controlled by adjusting influent flow rate, influent concentration was 1 mg/L.  Figure 2: NH4+ effluent concentration profile during loading increase experiments.  During each loading change ammonium effluent concentration stabilizes to a new value (temporary steady state) Figure 3: Relationship between NH4+ effluent concentration (temporary steady state concentration) and surface loading This work was supported by the Danish Council for Strategic Research, the project DW Biofilters – Sustainable drinking water treatment, biological filters Results  Objectives • Investigate the relationship between NH4+ loading and effluent NH4+ concentration in a filter • Identify the loading region where loading changes do not affect effluent concentration Surface loading :  Ammonium load per unit of external surface area Figure 1: Sketch of nitrification in a rapid sand filter. Ammonium is degraded by a nitrifying biofilm attched on the sand grain surface  Conclusions • NH4+ loading variations below the critical loading had no effect on effluent NH4+ concentration • Once the critical loading was exceeded, effluent NH4+ concentration was strongly affected by loading increases • For the investigated filter, the critical load was 5 times larger than the operating load. Performance of this filter is expected to be robust against load variations Introduction • Rapid sand filtration is used in drinking water treatment to remove particles and inorganic compounds such as NH4+, Fe+2 & Mn+2  • NH4+ is removed biologically by microorganisms attached on the sand • About 25% of waterworks in Denmark exceed the effluent NH4+ guideline of 0.05 mg/L. • Loading can often change due to switching between abstraction wells with different water quality • Loading that exceeds a filter’s removal capacity may cause transient ammonium breakthrough Research question: In which operating region have NH4+ loading changes no effect a filter’s performance?      Table 1: Different experimental loads applied. Steady state loading = surface loading of the full scale filter. Duration of experiments was short to avoid growth of nitrifying biomass Time (min )0 50 100 150 200 250 300Effluent NH4+-N (mg/L) 0.000.050.100.150.200.251 g NH4+/m2 /h2 g NH4+/m2 /h4 g NH4+ /m2 /hAverage effluent at operating load (steady state) •  Loadings up to 2 mg NH4+- N/ m2 / h have no effect on ammonium effluent concentration (t-test, α = 0.05) • Loadings higher than 2 NH4+- N/ m2 / h result in higher effluent NH4+ concentration • Critical loading = 2 mg NH4+- N/ m2 / h Surface loading (mg NH4+-N/ m2 sand/ h)0 1 2 3 4Effluent NH4+-N ( mg/ L)0.000.050.100.150.200.25 Critical loading No effect of loading changes Significant effect of loading changes 

Effect of surface loading fluctuationson ammonium removal during rapid sand filtration

http://orbit.dtu.dk/ws/files/43544577/9.pdf

Effect of surface loading fluctuationson ammonium removal during rapid sand filtration

Abstract

Similar works

Full text

Available Versions

Online Research Database In Technology