Abrahamsen, A.B.

Andersen, Niels Hessel

Baurichter, A.

Grivel, Jean-Claude

Zangenberg, N.

A comprehensive analysis of the innovation potential of superconductivity at Risø was performed in February 2004 by the main author of this report [1]. Several suggestions for new products and new markets were formulated by the superconductivity group andexamined by the innovation staff at Risø. The existing markets of superconducting technology is within highly specialized scientific areas such as magnetic confinement in fusion energy, sample environment in neutron scattering and large scale acceleratorssuch as the Large Hadron Collider(LHC) at Cern, or in the nuclear magnetic resonance (NMR) community using MR-imaging scanners in medicine and phase identification in organic chemistry. Only the NMR applications can be categorized as a highly profitableand commercial market today. The superconductivity group of Risø formulated and presented the gearless superconducting wind turbine multipole generator as the most promising new concept [2], but further initiatives were stopped due to unclear patentpossibilities. The experience of the innovation review was used in the STVF framework program "New superconductors: mechanisms, processes and products"[3] to identify potential new product for the collaborating company Danfysik A/S, which has a strongtradition in building resistive magnets for particle accelerators[4]. A technology transfer project was formulated at the end of 2005 with the purpose to collect the knowledge about the MgB2 superconductor gained in the STVF program and in the EuropeanFramework Program 6 project HIPERMAG[5]. It was presented at the Risø innovation seminar January 2006, and recently a collaboration between Risø and Danfysik A/S was initialized. The present report aims to outline a potential superconducting productwithin the STVF program. The use of the MgB2 superconductors in a dipole magnet for guiding particle beams in a small scale accelerator is examined with the purpose to build lighter and smaller than the present resistive magnets. Here the criticalcurrent density of primarily MgB2 will be compared with current density determined by specifications similar to the Tevatron accelerator, B = 4:4 Tesla and coil aperture D = 76 mm [6], which has been identified by Danfysik A/S as interesting. It isconcluded that MgB2 is useful for the dipole application and construction of a small test coil of one half of the magnet is planned in 2007.A comprehensive analysis of the innovation potential of superconductivity at Risø was performed in February 2004 by the main author of this report [1]. Several suggestions for new products and new markets were formulated by the superconductivity group and examined by the innovation staff at Risø. The existing markets of superconducting technology is within highly specialized scientific areas such as magnetic confinement in fusion energy, sample environment in neutron scattering and large scale accelerators such as the Large Hadron Collider(LHC) at Cern, or in the nuclear magnetic resonance (NMR) community using MR-imaging scanners in medicine and phase identification in organic chemistry. Only the NMR applications can be categorized as a highly profitable and commercial market today. The superconductivity group of Risø formulated and presented the gearless superconducting wind turbine multipole generator as the most promising new concept [2], but further initiatives were stopped due to unclear patent possibilities. The experience of the innovation review was used in the STVF framework program "New superconductors: mechanisms, processes and products"[3] to identify potential new product for the collaborating company Danfysik A/S, which has a strong tradition in building resistive magnets for particle accelerators[4]. A technology transfer project was formulated at the end of 2005 with the purpose to collect the knowledge about the MgB2 superconductor gained in the STVF program and in the European Framework Program 6 project HIPERMAG[5]. It was presented at the Risø innovation seminar January 2006, and recently a collaboration between Risø and Danfysik A/S was initialized. The present report aims to outline a potential superconducting product within the STVF program. The use of the MgB2 superconductors in a dipole magnet for guiding particle beams in a small scale accelerator is examined with the purpose to build lighter and smaller than the present resistive magnets. Here the critical current density of primarily MgB2  will be compared with current density determined by specifications similar to the Tevatron accelerator, B = 4:4 Tesla and coil aperture D = 76 mm [6], which has been identified by Danfysik A/S as interesting. It is concluded that MgB2  is useful for the dipole application and construction of a small test coil of one half of the magnet is planned in 2007

Online Research Database In Technology

                       General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.  • Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal   If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim.     Downloaded from orbit.dtu.dk on: Dec 20, 2017Design of MgB2 superconducting dipole magnet for particle beam transport inacceleratorsAbrahamsen, Asger Bech; Zangenberg, N.; Baurichter, A.; Grivel, Jean-Claude; Andersen, Niels HesselPublication date:2006Document VersionPublisher's PDF, also known as Version of recordLink back to DTU OrbitCitation (APA):Abrahamsen, A. B., Zangenberg, N., Baurichter, A., Grivel, J-C., & Andersen, N. H. (2006). Design of MgB2superconducting dipole magnet for particle beam transport in accelerators.  (Denmark. Forskningscenter Risoe.Risoe-R; No. 1578(EN)).   Risø-R-1578(EN) Design of MgB2 superconducting dipole magnet for particle beam transport in accelerators A.B. Abrahamsen, N. Zangenberg, A. Baurichter, J-C. Grivel and N.H. Andersen    Risø National Laboratory Roskilde Denmark November 2006    Author: A.B. Abrahamsen1, N. Zangenberg2, A. Baurichter2, J-C. Grivel1 and N.H. Andersen1  Title: Design of MgB2 superconducting dipole magnet for particle beam transport in accelerators Department: Materials Research DepartmentRisø-R-1578(EN)  November 2006   1Materials Research Department, Risø 2Danfysik A/S, Møllehaven 31, Jyllinge, Denmark    ISSN 0106-2840 ISBN 87-550-3555-8  Contract no.:   Group's own reg. no.:  Sponsorship:   Cover :    Pages: 15 Tables: References: 15  Abstract (max. 2000 char.): A comprehensive analysis of the innovation potential of superconductivity at Risø was performed in February 2004 by the main author of this report [1]. Several suggestions for new products and new markets were formulated by the super- conductivity group and examined by the innovation staff at Risø. The existing markets of superconducting technology is within highly specialized scientific areas such as magnetic confinement in fusion energy, sample environment in neutron scattering and large scale accelerators such as the Large Hadron Collider(LHC) at Cern, or in the nuclear magnetic resonance (NMR) community using MR-imaging scanners in medicine and phase identification in organic chemistry. Only the NMR applications can be categorized as a highly profitable and commercial market today. The superconductivity group of Risø formulated and presented the gearless superconducting wind turbine multipole generator as the most promising new concept [2], but further initiatives were stopped due to unclear patent possibilities. The experience of the innovation review was used in the STVF framework pro- gram "New superconductors: mechanisms, processes and products"[3] to identify potential new product for the collaborating company Danfysik A/S, which has a strong tradition in building resistive magnets for particle accelerators[4]. A technology transfer project was formulated at the end of 2005 with the purpose to collect the knowledge about the MgB2 superconductor gained in the STVF program and in the European Framework Program 6 project HIPERMAG[5]. It was presented at the Risø innovation seminar January 2006, and recently a collaboration between Risø and Danfysik A/S was initialized. The present report aims to outline a potential superconducting product within the STVF program. The use of the MgB2 superconductors in a dipole magnet for guiding particle beams in a small scale accelerator is examined with the purpose to build lighter and smaller than the present resistive magnets. Here the critical current density of primarily MgB2 will be compared with current density determined by specifications similar to the Tevatron accelerator, B = 4:4 Tesla and coil aperture D = 76 mm [6], which has been identified by Danfysik A/S as interesting. It is concluded that MgB2 is useful for the dipole application and construction of a small test coil of one half of the magnet is planned in 2007.    Risø National Laboratory Information Service Department P.O.Box 49 DK-4000 Roskilde Denmark Telephone +45 46774004 bibl@risoe.dk Fax +45 46774013 www.risoe.dk Contents1 Dipole magnets for small scale particle beam accelerators 42 cos(θ) dipole geometry 42.1 Current calculation of cos θ geometry 43 Intersecting ellipses geometry 54 Current densities of superconductor in dipole magnet 64.1 Circular cross section example 75 Current densities of commercial superconductors 75.1 Magnesium diboride MgB2 85.2 Y Ba2Cu3O6+x coated conductor 105.3 Bi2Sr2Ca2Cu3O10+x (Bi2223) first generation HTS tape 105.4 Nb− Ti Low Temperature Superconductor 126 Conclusion 12Acknowledgements 12Risø–R–1578(EN) 31 Dipole magnets for small scaleparticle beam acceleratorsAn increasing number of small scale accelerators are being produced and a rangeof interesting field and homogeneity limits of conventional resistive dipole magnetsfor particle beam transport were identified in a collaboration with Danfysik A/S[4].The question is if the introduction of superconductor wire in the dipoles willmake it possible to reach field strengths, which are considerably higher that thesaturation field of soft iron used in normal resistive magnets. To clarify this acalculation of the needed current density of the superconductor in the coil will beperformed and compared to the present performance of the MgB2 superconduct-ing wires or tapes and other commercially available superconductors.As a starting point we will analyze the specifications of the Nb-Ti based dipolesof the Tevatron accelerator build at Fermilab in 1983 [6]:• Field strength : Bmax = 4.4 Tesla• Diameter of homogenous field : Dhomogen = 0.076 m2 cos(θ) dipole geometryA homogenous dipole field can be generated in an infinitely long circular tube byrealizing a current distribution at the surface given by a cosine function [6]:I = I0 cos(θ) (1)where I0 is the surface current at θ = 0 as indicated by the blue arrows on figure1. The total current is Itot = 2I0.This causes a homogenous analytical magnetic field in the interior of the tubeB(θ) =µ0I02r0cos(θ) (2)which in the xy coordinate system becomesBx = 0 (3)By =µ0I02r0(4)where the vacuum permeability µ0 = 4pi · 10−7NA−2 and r0 is the diameter ofcurrent tube.2.1 Current calculation of cos θ geometryBy inserting numbers one can calculate the maximum current I0 at the surfaceneeded to obtain the target field:I0 =2r0µ0B=Dhomogenµ0Bmax=0.076m4pi · 10−7NA−2 4.4NA−1m−1= 2.66 · 105A (5)4 Risø–R–1578(EN)I( )θxyθI0BI0Figure 1. A homogenous dipole magnetic field B can be created inside a tube byrealizing a current distribution at the surface given as I(θ) = I0 cos(θ). The bluearrows indicates the path of I0 at both sides of the tube.Note that [B] = Tesla = NA−1m−1 and the the vacuum permeability is givenby µ0 = 4pi · 10−7NA−2. The above formula does not take into account the di-mensions of the current caring region and one might violate the assumption thatI0 is distributed as a surface current. Thus a more realistic description is needed.3 Intersecting ellipses geometryAn alternative analytical solution that creates a homogenous field inside the beamtube is realized by intersecting two elliptically shaped conductors as illustrated onfigure 2 [6, 7, 8]. The field distribution of one ellipse is:B = Bxx̂+By ŷ= − µ0Ja+ bayx̂+µ0Ja+ bbxŷ (6)where a and b are the major and minor axis of the ellipse centered at the origin,µ0 is the vacuum permeability, J is the current density pointing out of the paper,x and y are the coordinate inside the conductor and x̂ and ŷ are unit vectors ofthe coordinate system. One can confirm the known result for a circular conductorby setting a = b.The field distribution of two intersecting ellipses can be calculated from vectoraddition of equation 6 giving :B = Bleft +Bright= − µ0Ja+ bayx̂+µ0Ja+ bb(x+ s)ŷ+(−µ0(−J)a+ bayx̂+µ0(−J)a+ bb(x− s)ŷ)= 0x̂+ µ0J2bsa+ bŷ (7)Risø–R–1578(EN) 5where s denotes the center position at x = ±s of the two ellipses and all otherparameters are defined as above.JabxyJaxyJ+s-s ba)b)wxwywconductorBFigure 2. a) A homogenous current density J inside an elliptical conductor withmajor and minor axis given by a and b causes a field distribution given by equation6. b) A homogenous dipole field B along the y-axis is created in between two inter-secting elliptical conductors separated by ± s and with opposite current direction.The opening along the x- and y-axis inside the dipole are denoted wx and wy andthe thickness of the conductor region along the x-axis is wconductor.4 Current densities of supercon-ductor in dipole magnetIn order to calculate the current density needed to fulfil the field strength oneshould first work out the approximative dimensions. The opening inside the twoellipses along the x-axis is given bywx = −s+ a− (s− a)= 2(a− s) (8)The opening wy along the y-axis is most easily found from the parameter de-scription of an ellipse(x− x0a)2+(y − y0b)2= 1 (9)6 Risø–R–1578(EN)where the center of the ellipse is at (x0, y0) and the major and minor axis are aand b. wy is found by inserting (x0, y0) = (s, 0) and x = 0, which giveswy = 2y = 2b√1−( sa)2(10)The conductor thickness along the x-axis is given bywconductor = s+ a− (−s+ a)= 2s (11)which is just the distance between the two ellipse centers.4.1 Circular cross section exampleA circular cross section will be assumed in the following example to simplify thecalculations, a = b. By making the following assumption:• wx = 0.076 m• a = 0.0475 mwe can calculate the displacement of the circles =2a− wx2=0.095m− 0.076m2= 0.0095m (12)and the opening along the y-axiswy = 2b√1−( sa)2= 2 · 0.0475m√1−(0.0095m0.0475m)2= 0.093m (13)The conductor thickness along the x-axis becomeswconductor = 2s = 2 · 0.0095m = 0.019m (14)Now the current density can easily be calculated by inverting equation 7B = µ0J2a2as =⇒J =Bµ0s=4.4Tesla4pi · 10−7NA−2 · 0.0095m= 3.7 · 104Acm−2 (15)The example calculation above is illustrated on figure 3.5 Current densities of commercialsuperconductorsIn the following the critical current density of various commercial superconductorsare presented. It should be noted some of the superconductors such as the MgB2and coated conductors are still not developed to fulfil their full potential and bothprice and availability must be examined in more detail.Risø–R–1578(EN) 7−0.06 −0.04 −0.02 0 0.02 0.04 0.06−0.04−0.03−0.02−0.0100.010.020.030.04x [m]y [m]Current density of dipole magnet, J direction is out(in) of paper left(right)B||y = 4.4 TeslaDhomo = 0.076 mWx = 0.076 ma = 0.0475 ms = 0.0095 mWy = 0.093081 mWconductor = 0.019 mJ = 368569341.897 Am−2Figure 3. Example of intersecting circle geometry to create B = 4.4 Tesla by havinga current density of J = 3.7 ·104Acm−2 flowing in the colored regions. The circleshave a radius of a = 0.0475m. Given the opening along the x-axis wx = 0.076mone can determine the center displacement of the circles to s = 0.0095 m andwy = 0.093m. The thickness of the conductor region becomesWconductor = 0.019m.The unit of the figure scale is m.5.1 Magnesium diboride MgB2Figure 4 shows a plot of the critical current density Jc of theMgB2 superconductoras function of field . The superconductor is produced by the company ColumbusSuperconductors and the values corresponding to step 3 will be implemented atthe end of the year 2006 [9]. Jc is expected to reach Jc = 1.5 · 105Acm−2 at T =4.2 K and B = 4 Tesla. Thus the critical current density of theMgB2 wire exceedsthe target current density by approximately a factor of 4 at B = 4 Tesla and thisindicate that MgB2 might be quite useful for the dipole application. However themost important information is the engineering critical current density Je, whichincludes the non superconducting matrix around the MgB2 in the calculation ofthe critical current density. According to G. Grasso then Columbus will be ableto alter the geometry of the wires to obtain the needed Je [9]. Figure 5 shows across section of a prototype multifilament wire with a filling factor of f = 30%and the engineering critical current density is expected to beJe = Jc · f= 1.5 · 105Acm−2 · 0.3= 4.5 · 104Acm−2 (16)whereby the target current density will be at 82 % of the limit of the wire at T =4.2 K and B = 4.4 Tesla. Usually the loadline is positioned at 90 % of the criticalcurrent density. A reduction of 30 % of the critical current density is expected ifthe operation temperature is increased to T = 10 K instead of T = 4.2 K.8 Risø–R–1578(EN)0 2 4 6 8 10 12 14500500050000500000step 3step 2step 1Transportj cat4.2K(A/cm2 )Magnetic field (T)Figure 4. Critical current density of MgB2 tapes from Columbus Superconductors.Step 3 values will be implemented in the production line at the end of 2006 [9].MgB2Ni or FeNi alloyor FeFigure 5. Cross section of prototype multifilament MgB2 wire from Columbus su-perconductors with filling factor of 30 %. The darkMgB2 filaments are surroundedby Ni or Fe and the outer wall is made of Ni alloy or Fe [9].Figure 6 shows the specifications of the MgB2 wire from Hyper Tech Researchin Ohio, USA. It is seen that the critical current density exceeds that target valuefrom the calculations above Jc = 105Acm−2 at T = 10 K and B = 4 Tesla, butthe engineering critical current density is only Je = 2.2 · 104Acm−2 even at T =4.2 K and B = 4 Tesla. Thus an alternative geometry of the wires is needed toobtain sufficient Je.Risø–R–1578(EN) 9Figure 6. Critical current density of MgB2 wire from HyperTech Research Inc.[10]5.2 Y Ba2Cu3O6+x coated conductorFigure 7 shows a plot of the upper critical field of the second generation(2G)High Temperature Superconductor(HTS) tape produced by SuperPower. Thesenew tapes will have Jc = 105Acm−2 at H = 4 tesla and T = 77 K, which soundextremely promising, but the delivery and price might be a problem at present.August 2006 prices of coated conductor are around 100 US$ per meter.5.3 Bi2Sr2Ca2Cu3O10+x (Bi2223) first generation HTStapeFigure 8 and 9 shows the critical current density of the Bi2223 tape from AmericanSuperconductors with both the field perpendicular and parallel to the Cu-O planesof the superconductor. It is important to note that Bi2223 is from a fundamental10 Risø–R–1578(EN)Figure 7. Critical current density of second generation(2G) High Temperature Su-perconductor (HTS) Y Ba2Cu3O6+x coated conductor tape from SuperPower [11].point of view quite limited in the operation in magnetic field at T = 77 K. This isseen in the engineering critical current densities Je = 2.4·104Acm−2 when B‖c = 4Tesla and Je = 3.9 ·104Acm−2 when B‖ab = 4 Tesla. Thus Bi2223 must be cooledto T = 10 K to support the current density of the dipole magnet specified in thisnote.It should be noted that Bi2212 wires from Nexans [13] (Je = 4.5 · 104Acm−2when B = 20 Tesla and Je = 9.1 · 104Acm−2 when B = 0 Tesla both when T =4.2 K) and Bi2223 from Sumitomo [14] should be checked before final conclusioncan be made on the Bi-family conductors.Figure 8. Engineering critical current density of first generation HTS Bi2223 tapefrom American Superconductors when H‖c. The reference is Je = 1.07−1.33 ·104Acm−2 at T = 77 K and H = 0 Tesla [12].Risø–R–1578(EN) 11Figure 9. Engineering critical current density of first generation HTS Bi2223 tapefrom American Superconductors when H‖ab. The reference is Je = 1.07−1.33·104Acm−2 at T = 77 K and H = 0 Tesla [12].5.4 Nb− Ti Low Temperature SuperconductorA Nb-Ti Superconductor was found on the home-page of Luvata [15] and a Nb-Tiwire with 552 filaments will have a critical current density of Jc = 3.3 · 105Acm−2at T = 4.2 K and in a field of H = 5 Tesla.6 ConclusionIt is concluded that MgB2 is a promising candidate as superconductor materialfor dipole accelerator magnets, since the critical current density exceeds the tar-get current density at T = 4.2K outlines in this report. However Nb-Ti is muchbetter at T = 4.2 K, but the critical temperature of Nb-Ti Tc = 9.5 K is exceededat 10 K, which is the really interesting operation temperature, because it canbe obtained by modern cryo-coolers. The construction of a small MgB2 super-conducting test coil of one half of the magnet seems quite possible and this willbe done in 2007 as part of the fulfilment of the STFV framework program ”Nyesuperledere: mekanismer, processer og produkter”. The second generation YBCOcoated conductors may be very useful for future dipole magnets operating at T =77 K, but most like at a higher production cost than the MgB2 based ones.AcknowledgementsThis work was supported by the Danish Technical Research Council under theFramework Programme on Superconductivity. The authors would like to thankGianni Grasso for sharing information about the MgB2 conductors under currentdevelopment at Columbus Superconductors.12 Risø–R–1578(EN)References[1] A.B. Abrahamsen Review presentation handed out on request (Power PointPresentation)[2] A.B. Abrahamsen and N.H. Andersen Multipole superconducting windturbinegenerator (Invention Disclosure Form filed as case p481 at Risø)[3] ”Nye superledere: mekanismer, processer og produkter” STVF homepage(http://forsk.dk/portal/page/pr04/FIST/FORSIDE/ FOER 010205/STATENS TEKNISKVIDENSKABELIGE FORSKNINGSRAAD/FONDSFUNKTIONEN I TAL STVF/BEV 2001)[4] Danfysik A/S homepage (www.danfysik.dk)[5] FP6 EU project HIPERMAG homepage(http://lt.tnw.utwente.nl/research/HCS/Projects/HIPERMAG/)[6] Haus Rissen Superconductivity in particle Accelerators (Cern Acceleratorschool 1996, ISBN 92-9083-084-0)[7] R.A. Beth An integral formula for two dimensional fields (Jour.Appl.Phys.38, 4689(1967))[8] R.A. Beth Current and coil forces as countour integrals in two dimensionalMagnetic fields (Jour.Appl.Phys. 40, 2445(1969))[9] G. Grasso Private communication (Columbus superconductors, Genova,Italy, http://www.columbussuperconductors.com/)[10] HyperTech Research Inc. Information from ASC 2006 Conference(www.hypertechresearch.com)[11] SuperPower Inc. InterMagnetics homepage(www.intermagnetics.net/SuperPower/Programs.aspx)[12] American Superconductors Inc. homepage(www.amsuper.com/products/htsWire/103419093341.cfm)[13] Nexans Inc. homepage(www.nexans.com/internet/Navigate.nx?id=1015)[14] Sumitomo Inc. homepage(www.sumitomoelectricusa.com/scripts/products/scc/)[15] Luvata homepage ( www.luvata.com )Risø–R–1578(EN) 13www.risoe.dk Risø’s research is aimed at solving concrete problems in the society.  Research targets are set through continuous dialogue with business, the political system and researchers.  The effects of our research are sustainable energy supply and new technology for the health sector. 

Design of MgB<sub>2</sub> superconducting dipole magnet for particle beam transport in accelerators

http://orbit.dtu.dk/ws/files/7703320/ris_r_1578.pdf

Design of MgB<sub>2</sub> superconducting dipole magnet for particle beam transport in accelerators

Abstract

Similar works

Full text

Available Versions

Online Research Database In Technology