Hansen, Thomas Willum

Wagner, Jakob Birkedal

The increasing use of environmental transmission electron microscopy (ETEM) in materials science provides exciting new possibilities for investigating chemical reactions and understanding both the interaction of fast electrons with gas molecules and the effect of the presence of gas on high‐resolution imaging. A gaseous atmosphere in the pole‐piece gap of the objective lens of the microscope alters both the incoming electron wave prior to interaction with the sample and the outgoing wave below the sample. Whereas conventional TEM samples are usually thin (below 10‐20 nm), the gas in the environmental cell fills the entire gap between the pole pieces and is thus not spatially localized. By using an FEI Titan ETEM equipped with a monochromator and an aberration corrector on the objective lens, we have investigated the effects on imaging and spectroscopy caused by the presence of the gas. State‐of‐the‐art aberration corrected TEMs provide electron micrographs with high spatial resolution. The apparent interpretability of such images encourages microscopists to analyze data more quantitatively. Such an analysis requires a detailed knowledge of the entire path and propagation of the electrons along the microscope column. The effects of gas on the electron wave in the objective lens are not well understood and needs further attention. Imaging samples with a simple geometry, such as gold particles on a flat graphene substrate and analyzing the variations in contrast, provides a means for understanding the issues involved with imaging in the presence of a gas. Furthermore, electron energy‐loss spectroscopy can tell us about the local chemical environment in the vicinity of the sample. Using a differentially pumped FEI Titan 80‐300 Titan ETEM, high‐resolution TEM micrographs and electron energy‐loss spectra were acquired from Au/graphene samples in vacuum and in a hydrogen atmosphere at pressures up to 700Pa. The gases were introduced into the environmental cell using digitally controlled mass flow controllers, providing accurate and stable control of the pressure in the cell. The loss of beam intensity when traversing the pole piece gap was measured by recording the signal outside the sample region on the pre‐GIF CCD camera (see Figure 1 left). The effects on high resolution imaging were investigated by imaging gold nanoparticles below 5nm in diameter (see Figure 1 middle and right). We will present results from imaging in various elemental as well as di‐molecular gases and their effect on imaging and spectroscopy in the environmental transmission electron microscope

Online Research Database In Technology

                       General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.  • Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal   If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim.     Downloaded from orbit.dtu.dk on: Dec 19, 2017Environmental TEM in an Aberration Corrected MicroscopeHansen, Thomas Willum; Wagner, Jakob BirkedalPublication date:2011Link back to DTU OrbitCitation (APA):Hansen, T. W., & Wagner, J. B. (2011). Environmental TEM in an Aberration Corrected Microscope. Abstractfrom Microscopy & Microanalysis : Pre-Meeting Specialist Workshop on Opportunities, Artifacts andInterpretation of Aberration-Corrected Electron Microscopy Data, Nashville, Tennessee, USA, .Environmental TEM in an Aberration Corrected Microscope Thomas W. Hansen*, Jakob B.Wagner DTU Cen, Fysikvej, building 307, DK‐2800 Kgs. Lyngby, Denmark *twh@cen.dtu.dk   The  increasing  use  of  environmental  transmission  electron  microscopy  (ETEM)  in  materials  science provides exciting new possibilities for investigating chemical reactions and understanding both the interaction of  fast  electrons with  gas molecules  and  the  effect  of  the  presence  of  gas  on  high‐resolution  imaging.  A gaseous atmosphere  in the pole‐piece gap of the objective  lens of the microscope alters both the  incoming electron  wave  prior  to  interaction  with  the  sample  and  the  outgoing  wave  below  the  sample.  Whereas conventional TEM samples are usually thin (below 10‐20 nm), the gas in the environmental cell fills the entire gap between the pole pieces and  is thus not spatially  localized. By using an FEI Titan ETEM equipped with a monochromator  and  an  aberration  corrector  on  the  objective  lens,  we  have  investigated  the  effects  on imaging and spectroscopy caused by the presence of the gas.   State‐of‐the‐art aberration corrected TEMs provide electron micrographs with high spatial resolution. The apparent interpretability of such images encourages microscopists to analyze data more quantitatively. Such an  analysis  requires  a  detailed  knowledge  of  the  entire  path  and  propagation  of  the  electrons  along  the microscope column. The effects of gas on the electron wave in the objective lens are not well understood and needs further attention.  Imaging samples with a simple geometry, such as gold particles on a flat graphene substrate and analyzing  the variations  in  contrast, provides a means  for understanding  the  issues  involved with  imaging  in the presence of a gas. Furthermore, electron energy‐loss spectroscopy can tell us about the local chemical environment in the vicinity of the sample.   Using a differentially pumped FEI Titan 80‐300 Titan ETEM, high‐resolution TEM micrographs and electron energy‐loss spectra were acquired  from Au/graphene samples  in vacuum and  in a hydrogen atmosphere at pressures up to 700Pa. The gases were introduced into the environmental cell using digitally controlled mass flow controllers, providing accurate and stable control of the pressure  in the cell. The  loss of beam  intensity when traversing the pole piece gap was measured by recording the signal outside the sample region on the pre‐GIF CCD camera (see Figure 1  left). The effects on high resolution  imaging were  investigated by  imaging gold nanoparticles below 5nm in diameter (see Figure 1 middle and right).   We will present results from imaging in various elemental as well as di‐molecular gases and their effect on imaging and spectroscopy in the environmental transmission electron microscope.  Figure 1: Left: Variation in intensity measured on the CCD as a function of gas pressure in the sample region; middle: graphene-supported Au nanoparticle imaged in vacuum; right: Au nanoparticle imaged in hydrogen at 200Pa. 

Environmental TEM in an Aberration Corrected Microscope

http://orbit.dtu.dk/ws/files/6295627/pre_meeting_2011_twh.pdf

Environmental TEM in an Aberration Corrected Microscope

Abstract

Similar works

Full text

Available Versions

Online Research Database In Technology