Bezyazeekov, P.A.

Budnev, N.M.

Gress, O.A.

Haungs, A.

Hiller, R.

Huege, T.

Kazarina, Y.

Kleifges, M.

Konstantinov, E.N.

Korosteleva, E.E.

Kostunin, D.

Krömer, O.

Kuzmichev, L.A.

Lubsandorzhiev, N.

Mirgazov, R.R.

Monkhoev, R.

Pakhorukov, A.

Pankov, L.

Prosin, V.V.

Rubtsov, G.I.

Schröder, F.G.

Wischnewski, R.

Zagorodnikov, A.

English

Tunka-REX Collaboration

Bezyazeekov, P. A.

Budnev, N. M.

Gress, O. A.

Konstantinov, E. N.

Korosteleva, E. E.

Kuzmichev, L. A.

Mirgazov, R. R.

Prosin, V. V.

Rubtsov, G. I.

Schröder, F. G.

KITopen

PoS(ICRC2015)573Calibration of the absolute amplitude scale of theTunka Radio Extension (Tunka-Rex)R. Hiller∗1, P.A. Bezyazeekov2, N.M. Budnev2, O.A. Gress2, A. Haungs1, T. Huege1,Y. Kazarina2, M. Kleifges3, E.N. Konstantinov2, E.E. Korosteleva4, D. Kostunin1,O. Krömer3, L.A. Kuzmichev4, N. Lubsandorzhiev4, R.R. Mirgazov2, R. Monkhoev2,A. Pakhorukov2, L. Pankov2, V.V. Prosin4, G.I. Rubtsov5, F.G. Schröder1,R. Wischnewski6, A. Zagorodnikov2 - Tunka-Rex Collaboration1 Institut für Kernphysik, Karlsruhe Institute of Technology (KIT), Germany2 Institute of Applied Physics ISU, Irkutsk, Russia3 Institut für Prozessdatenverarbeitung und Elektronik, Karlsruhe Inst. of Tech. (KIT), Germany4 Skobeltsyn Institute of Nuclear Physics MSU, Moscow, Russia5 Institute for Nuclear Research of the Russian Academy of Sciences, Moscow, Russia6 DESY, Zeuthen, GermanyE-mail: roman.hiller@kit.eduThe Tunka Radio Extension (Tunka-Rex) is an array of 44 radio antenna stations, distributed over3 km2, constituting a radio detector for air showers with an energy threshold around 1017 eV. Itis an extension to Tunka-133, an air-Cherenkov detector in Siberia, which is used as an exter-nal trigger for Tunka-Rex and provides a reliable reconstruction of energy and shower maximum.Each antenna station consists of two perpendicularly aligned active antennas, called SALLAs. Anantenna calibration of the SALLA with a commercial reference source enables us to reconstructthe detected radio signal on an absolute scale. Since the same reference source was used for thecalibration of LOPES and, in a calibration campaign in 2014, also for LOFAR, these three exper-iments now have a consistent calibration and, therefore, absolute scale. This was a key ingredientto resolve a longer standing contradiction between measurements of two calibrated experiments.We will present how the calibration was performed and compare radio measurements of air show-ers from Tunka-Rex to model calculations with the radio simulation code CoREAS, confirming itwithin the scale uncertainty of the calibration of 18%.The 34th International Cosmic Ray Conference,30 July- 6 August, 2015The Hague, The Netherlands∗Speaker.© Copyright owned by the author(s) under the terms of the Creative Commons Attribution-NonCommercial-ShareAlike Licence. http://pos.sissa.it/PoS(ICRC2015)573Tunka-Rex Calibration R. Hiller1. IntroductionTo overcome restrictions of commonly used detectors for cosmic ray air showers, new detectortypes and detection principles are being investigated since the inception of air shower detection.One promising candidate for a next generation air shower detector, or part of a hybrid detector, isthe radio detection technique. It is based on the radio emission of air showers: Mainly due to thegeomagnetic deflection of charged particles, a short electromagnetic pulse in the radio frequencyrange is emitted [1]. A small, but still significant contribution to the pulse from the Askaryaneffect [2], originating from a varying net charge, was experimentally confirmed lately [3, 4, 5].The resulting pulses can be detected with an antenna array. The main advantages of thismethod are its almost full duty cycle and the indicated high sensitivity to air shower parameters.Because of the high transparency of the atmosphere for radio frequencies, it is also possibly wellsuited for high observation depths or highly inclined showers.The first generation of digital radio arrays [6, 7] proved their general feasibility and sensitivityto air-shower parameters, while also fueling progress in the theoretical understanding of the radioemission. Contemporary radio arrays now have to either show their competitiveness to establisheddetection principles or refine the methods and technology to reach it.The Tunka Radio Extension (Tunka-Rex) is a digital radio-antenna array in the Tunka valleyin Siberia, Russia. It is co-located with Tunka-133 [8], a photomultiplier array for the detectionof cosmic-ray air showers via their Cherenkov emission in air. The detector concept of Tunka-Rex is to record the radio signal of a shower in coincidence with the air-Cherenkov signal, bytriggering the antenna array with Tunka-133. Thereby obtaining a reliable trigger, as well as theshower parameters from an independent measurement with known precision to compare the radioreconstruction to. However, Tunka-133 is limited in its operation time to moonless nights duringwinter. To overcome this limitation, in near future, Tunka-Rex will also be triggered by Tunka-Grande [9], a recently installed scintillator-based detector for cosmic-ray air showers at the site,capable of operation around-the-clock.One goal of Tunka-Rex is to obtain a calibrated measurement of the radio signal. This enablesfurther testing and improvement of the modeling of the radio signal, as well as determining its ab-solute scale for comparison to other radio experiments. For this purpose we performed an antennacalibration with a reference source.In this paper we describe the Tunka-Rex antenna station and its calibration. Finally we com-pare measured radio amplitudes from air-shower events to simulated ones with the simulation soft-ware CoREAS.2. Detector setupThe layout of Tunka-Rex is depicted in Fig.1. Its central part consists of 19 antenna stations,distributed over 1 km2. These antennas are currently triggered by Tunka-133. There is one antennaconnected to each of the 19 clusters of Tunka-133. A cluster consists of a group of 7 PMTs in ahexagonal pattern with common housing for electronics and data acquisition (DAQ) in its center.Together with 6 more distant antenna stations Tunka-Rex covers 3 km2, but these outer antennas areonly relevant for the highest energies, since the antenna spacing decreases from roughly 200 m to2PoS(ICRC2015)573Tunka-Rex Calibration R. Hiller−1.0 −0.5 0.0 0.5 1.0east (km)−1.0−0.50.00.51.0north(km)PMTAntennas 2012Ant. added 2013Scint. + ant. 2014Figure 1: The layout of Tunka-133 and Tunka-Rex in its different stages. Tunka-133 is organized in hexag-onal clusters. Each cluster is equipped with one Tunka-Rex antenna station and a scintillator station withanother antenna station connected to it.500 m in this outer region. With the Tunka-Grande scintillator extension each cluster was extendedby a scintillator station with another antenna station, totaling 44 antennas, for the whole array.Once Tunka-Grande is fully comissioned, it will trigger the whole array. Each Tunka antennastation consists of two channels, each with a SALLA [10] antenna, aligned perpendicularly to eachother. By reconstructing the incoming direction of the radio signal from the relative arrival time,the two channels enable the reconstruction of the electric field vector.Each SALLA is directly connected to a low-noise-amplifier (LNA), in the upper antenna box(see Fig. 2), enhancing the signal by about 22 dB. From there the signal is transferred via coaxialcable to the cluster center in 20 m distance. The cluster center is heated to ensure stable operationfor the contained electronics in cold winter nights. There, the signal is filtered to the frequencyrange 35-76 MHz and enhanced by another 32 dB by a filter-amplifier. Finally, the so far analogsignal is digitized at 200 Ms/s with 12 bit depth, and a ≈ 5 µs trace containing 1024 samples isrecorded around the trigger time of Tunka-133.3. Antenna calibrationThe determine the electric field on an absolute scale from the ADC counts of the trace, theimpact of the full hardware chain has to be understood and inverted. From a formal point of view,the impact of a linear system on an incoming signal is described by the convolution of the incoming3PoS(ICRC2015)573Tunka-Rex Calibration R. HillerFigure 2: Setup of the Tunka-Rex antenna calibration in Karlsruhe. A crane holds a reference source abovethe antenna aligned from the ground using strings. With the known emitted field strength of the referencesource, the characteristics of the SALLA can be determined.signal with its response function. For an antenna, this response function depends on the incomingdirection. For dipole like antennas, the vector effective length ~H is commonly used as responsefunction and especially convenient if the polarization of the signal is of interest. In case of anantenna the incoming signal is an electric field ~E and the outgoing signal is a voltage V . In thefrequency domain the convolution becomes a simple point-wise multiplicationV (ν) = ~H(ν) ·~E(ν). (3.1)Provided two measurements of V from the two perpendicular antenna channels with linearly inde-pendent sensitivity to the polarization, this equation can be inverted to reconstruct all three compo-nents of ~E, if the incoming direction and ~H is known. While the incoming direction in each eventis determined from the arrival times, assuming the incoming direction of the shower and the radiosignal coincide, ~H remains the same for all events and has to be determined only once.To obtain ~H, we performed a calibration of the full analog hardware chain, including theantenna, with a reference source. Therefore, a complete Tunka-Rex antenna station was deployedat the Karlsruhe Institute of Technology, Germany. On the Tunka site, the station is plugged intothe existing DAQ, which was not available in Karlsruhe, so we had to rely on a oscilloscope fordata acquisition. This makes the calibration almost end-to-end, except for the DAQ, containing theanalog-to-digital converter, which was calibrated independently.The reference source we used was the same as the one used for the calibration of LOPES [11]and recently LOFAR [12]. The available calibration of the reference source was performed underfree-field conditions, with a high impact from ground reflections. Therefore, we obtained new cali-bration values for the reference source for free-space conditions, which are also used for an updateof the LOPES results [13]. Due to the use of the same reference source, these three experiments4PoS(ICRC2015)573Tunka-Rex Calibration R. Hillernow have the same amplitude scale and can be compared neglecting the scale uncertainty due tothe calibration of the reference source.The reference source is the commercially available biconical antenna and signal generatorVSQ1000+DPA4000 by Schaffner Electrotest GmbH (now Teseq). It produces a signal linearlypolarized along the antenna. In the time domain the signal is a comb with one puls per µs. In thefrequency domain this results in a comb, consisting of peaks with 1 MHz spacing. The absoluteheight of the peaks, i.e. the amplitudes at rre f = 10 m for the respective frequencies are given bythe manufacturer with an accuracy of 16% (one sigma), making up for the dominant uncertainty inthe amplitude reconstruction.For the calibration, the source is placed at different zenith angles above the antenna in >10 mdistance to the antenna by a crane, standing in 20 m distance, holding the source with a woodenspacer. With a differential GPS the distance r between the reference source and the SALLA aredetermined with a precision of several 10 cm. The source is aligned via strings from ground alongthe polarization axis of maximum sensitivity of one of the SALLAs. So the one channel receivesmaximal power, while the other one receives minimal power. We can obtain ~H(ν) via:~H(ν) =V (ν)∣∣∣~E(ν)∣∣∣ · rrre f ·~p. (3.2)∣∣∣~E(ν)∣∣∣ is the absolute value of the electric field strength of the reference source. To obtain thepolarization axis of maximum sensitivity ~p, an antenna simulation of the passive antenna structureis performed with the NEC2 code. It turns out, that the sensitivity of the SALLA closely followsthe pattern of a horizontal dipole in the antenna arc plane.Measuring the response of the analog hardware separately with a network analyzer [14], wecan subtract it from the total response to extract the VEL of the bare antenna. In Fig. 3, the simu-lated VEL is shown against the measured one. The relative deviation of measured from simulatedVEL over different zenith angles is 12%, averaged over all relevant frequencies, used as an esti-mated for the precision of the directivity model. The scale deviation is 6%, which is in the expectedorder due to the calibration uncertainty of the reference source of 16%.For the calibration we normalize the simulated antenna pattern frequency-wise to the mean ofall calibration measurements at different zenith angles. The total scale uncertainty is 18%, resultingfrom the squared sums of 16% from the uncertainty of the calibration of the reference source, 6%from the temperature during the calibration and 4% from positioning and alignment of the referencesource. The uncertainty on the absolute amplitude reconstruction on antenna level is 22%. Besidesthe 18% on the scale, it includes 12% from the antenna model and some smaller contributions fromtemperature, antenna alignment and uncertainties in the production and deployment of the antennastations (details in [15]).4. Amplitude comparisonAfter the calibration we compare model calculations of the radio emission to the actual mea-sured amplitudes. Therefore, we take the Tunka-133 data set of the first season, 2012/2013, wherethe reconstructed primary energy is above 1016 eV and an zenith angle below 50◦.5PoS(ICRC2015)573Tunka-Rex Calibration R. Hiller04590 9045H(m)0.01.02.040 MHz50 MHz60 MHz70 MHzFigure 3: Measured vector effective lengths of the bare SALLA (markers) and simulated ones (lines). Theleft-right seperation is only for illustration, since all curves are mirror-symmetric.We then cut the frequency range to the realized bandwidth of 35-76 MHz and remove somesingle frequency entries from the spectrum at every 5 MHz, where we frequently observe interfer-ences. Then the full hardware response is inverted. A noise level is determined by the RMS ofa 500 ns window before the signal window and a signal S by the peak of the Hilbert envelope inthe signal window. As radio event only those qualify which have at least 3 stations with a signal-to-noise ratio (S2/N2) of at least 10, which enables the reconstruction of the shower axis from therelative arrival times of the pulses. The shower axis then has to agree with the on reconstructed byTunka-133 within 5◦.This leaves 92 events in the data set for which we perform simulations of the radio signal withCoREAS [16]. The events are simulated for proton and iron primaries with initial parameters fromthe Tunka-133 reconstruction. Since the depth of the shower maximum cannot be directly set in thesimulation, but emerges from other parameters and shower fluctuations, we repeat the simulationsseveral times and take only simulations into account, which happen to have their shower maximumcloser than 30 g/cm2 to the Tunka-133 reconstruction.The remaining events undergo a full detector simulation and afterwards the same reconstruc-tion algorithm and cuts are used as for the real data. 20 iron and 28 proton events pass all re-quirements and are used for comparing measurements and simulations. Since every event containsmultiple stations, there are 83 and 124 amplitude measurements for iron and proton, respectively.In Fig. 4 these ampltiudes are shown versus the measured ones. The scale for iron and protonare off by a factor of 0.96 and 0.84 respectively, within the scale uncertainty of the calibration of6PoS(ICRC2015)573Tunka-Rex Calibration R. Hiller102 103Simulated Amplitude (µV/m)102103MeasuredAmplitude(µV/m)Scale UncertaintyProtonIronFigure 4: Amplitudes simulated with CoREAS versus measurements from actual showers. For the simula-tion initial parameters from Tunka-133 where used. Error bars indicate the energy ucertainty of Tunka-133for the simulation and the uncertainty from background for the measurement.18%. Event-to-event and shower-to-shower uncertainties average out for the mean over severalantennas from different events.5. SummaryTunka-Rex is a digital radio array for the detection of air showers in Siberia. Besides deter-mining the precision and overall benefit of a radio detector in combination with an air-Cherenkovdetector, its goal is to determine the absolute scale of radio emission. Therefore, we performedan absolute calibration with a commercially available reference source, reaching an accuracy foran individual amplitude measurement of 22%, including 18% uncertainty on the absolute scale.The same reference source was also used by LOPES and LOFAR. These three experiments nowhave a consistent amplitude calibration. Comparing the measured amplitudes to the predictions ofthe simulation code CoREAS, we find agreement within the uncertainties. Therefore, Tunka-Rexconfirms the applicability of CoREAS for the simulation of absolute amplitudes of radio emissionby air showers. It also provides a measure of the absolute scale of radio amplitudes in its frequencyband.7PoS(ICRC2015)573Tunka-Rex Calibration R. HillerAcknowledgmentsTunka-Rex has been funded by the German Helmholtz association (grant HRJRG-303) andsupported by the Helmholtz Alliance for Astroparticle Physics (HAP). This work was supportedby the Russian Federation Ministry of Education and Science (agreement 14.B25.31.0010, zadanie3.889.2014/K) and the Russian Foundation for Basic Research (Grants 12-02-91323, 13-02-00214,13-02-12095, 14002-10002).References[1] F.D. Kahn and I. Lerche, Radiation from cosmic ray air showers, Proc. Phys. Soc., Sect. A 289 206(1966).[2] G.A. Askaryan, Excess negative charge of an electron-photon shower and its coherent radio emission,Sov. Phys. JETP 14 441 (1961).[3] A. Belletoile, R. Dallier, A. Lecacheux et al. (CODALEMA Coll.), Evidence for the charge-excesscontribution in air shower radio emission observed by the CODALEMA experiment, AstroparticlePhysics 69 50-60 (2015).[4] P. Schellart, S. Buitink, A. Corstanje et al. (LOFAR Collaboration), Polarized radio emission fromextensive air showers measured with LOFAR, JCAP 1410 014 (2014).[5] A. Aab, P. Abreu, M. Aglietta et al. (Pierre Auger Coll.), Probing the radio emission from air showerswith polarization measurements, Phys. Rev. D 89 052002 (2014).[6] D. Ardouin, A. Belletoile, D. Charrier et al. (CODALEMA Coll.), Radio-detection signature ofhigh-energy cosmic rays by the CODALEMA experiment, NIM A 555 148-163 (2005).[7] H. Falcke, W.D. Apel, A.F. Badea et al. (LOPES Coll.), Detection and imaging of atmospheric radioflashes from cosmic ray air showers, Nature 435 313-316 (2005).[8] V.V. Prosin, S.F. Berezhnev, N.M. Budnev et al. (Tunka-133 Coll.), Tunka-133: Results of 3 yearoperation, NIM A 756 94-101 (2014).[9] N.M. Budnev, I.I. Astapov, A.G. Bogdanov et al. (TAIGA Coll.), TAIGA the Tunka AdvancedInstrument for cosmic ray physics and Gamma Astronomy, JINST 9 C09021 (2014).[10] P. Abreu, M. Aglietta, M. Ahlers et al. (Pierre Auger Coll.), Antennas for the Detection of RadioEmission Pulses from Cosmic-Ray induced Air Showers at the Pierre Auger Observatory, JINST 7P10011 (2012).[11] S. Nehls, A. Hakenjos, M.J. Arts et al., Amplitude calibration of a digital radio antenna array formeasuring cosmic ray air showers, NIM A 589 350-361 (2008).[12] A. Nelles, T. Karskens, M. Krause et al., Calibrating the absolute amplitude scale for air showersmeasured at LOFAR, JINST 2015 in preparation.[13] K. Link et al. (LOPES Collaboration), this issue 311 (2015).[14] R. Hiller, N.M. Budnev, O.A. Gress et al. (Tunka-Rex Coll.), The Tunka-Rex antenna station, InProceedings of the 33rd ICRC 1278 (2013).[15] P.A. Bezyazeekov , N.M. Budnev , O.A. Gress et al. (Tunka-Rex Collaboration), Measurement ofcosmic-ray air showers with the Tunka Radio Extension (Tunka-Rex), NIM A (2015) submitted.[16] T. Huege, M. Ludwig and C.W. James, Simulating radio emission from air showers with CoREAS,AIP Conference Proceedings 1535 128-132 (2013).8

Calibration of the absolute amplitude scale of the tunka radio extension (Tunka-Rex)

https://publikationen.bibliothek.kit.edu/1000060633/23917485

Calibration of the absolute amplitude scale of the tunka radio extension (Tunka-Rex)

Abstract

Similar works

Full text

Available Versions

KITopen