Cech, Jiri

Christiansen, Alexander Bruun

Kristensen, Anders

Taboryski, Rafael Jozef

Online Research Database In Technology

                       General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.  • Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal   If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim.     Downloaded from orbit.dtu.dk on: Dec 18, 2017Fabrication of nanostructures on double-curved PMMA surfaces by thermal imprintwith PDMS stampChristiansen, Alexander Bruun; Cech, Jiri; Kristensen, Anders; Taboryski, Rafael J.Publication date:2011Link back to DTU OrbitCitation (APA):Christiansen, A. B., Cech, J., Kristensen, A., & Taboryski, R. J. (2011). Fabrication of nanostructures on double-curved PMMA surfaces by thermal imprint with PDMS stamp. Poster session presented at The 55th InternationalConference on Electron, Ion, and Photon Beam Technology and Nanofabrication, Las Vegas, Nevada, USA, .Fabrication of nanostructures on double-curved PMMAsurfaces by thermal imprint with PDMS stampA. B. Christiansen, J. Cech, A. Kristensen and R. TaboryskiDTU Nanotech, Technical University of DenmarkAlexander.Christiansen@nanotech.dtu.dkWe present a method for imprinting nanostructures in double-curved PMMA sur-faces, using an elastic PDMS stamp and a hydrostatic press. Features of sizes downto 420 nm are imprinted onto 280 µm high spherical caps with a radius of curva-ture of 1 mm and a baseline diameter of 1.4 mm on an otherwise planar substrate.Conformal contact between an intrinsically planar stamp and a double-curved sub-strate requires a tensile strain on the neutral plane of the stamp. Our results showan increase in the pitch of the imprinted pattern of 20% compared to the unstrainedstamp.There is an increasing interest in methods for patterning double-curved substratesfor various purposes, e.g. anti-reflective structures on micro-lenses. Zhang et al.1imprinted a grating with a period down to 820 nm, on a spherical substrate with a49 mm radius of curvature, using capillary force lithography. Cheng et al.2 usedgas pressure and a UV curable resist to imprint 600 nm features on a substrate with57.5 mm radius of curvature. Choi et al.3 used a PDMS stamp to imprint 350 nmfeatures on 10 mm radius of curvature spherical substrates.A planar aluminium substrate with a single spherical protrusion was spincoatedwith 350k PMMA (Tg=105 ◦C) in anisole and baked at 150 ◦C for 5 minutes. Thesubstrate was imprinted with a nanostructured PDMS stamp, by applying a hydro-static pressure on the backside of the stamp (Obducat Eitre R© 3). This allows thestamp to conform to the PMMA substrate and apply a uniform pressure over thecurved surface. The imprint was made at 10 bar pressure, at 120 ◦C for 10 minutes.The imprinted PMMA surface was imaged with AFM (Fig. 1), and the micrographswere analyzed with an image processing program4. The imprinted structures werecharacterized by depth and lateral size and period. These results were recorded atdifferent distances to the apex of the protrusion (Fig. 2), and compared to the un-strained stamp. The results show that the pitch of the imprinted features is strainedup to 20% at the apex of the protrusion (Fig. 3).1Zhang et al. Optics Express 18 (2010) 150092Cheng et al. J. Vac. Sci. Technol. B 24 (2006) 17243Choi et al. Nanotechnology 15 (2004) 17674http://www.imagemet.comFigure 1: Atomic force micrograph of the imprinted surface. The image was recorded at position Bon Fig. 2. The average height of the imprinted structures is 64 nm.Figure 2: Profile of the imprinted surface. The radius of curvature is 1mm, total height is 280 µmand the diameter is 1400 µm. Well defined imprints are obtained at positions A, B and C.Figure 3: An example of unit cell identification to estimate the pitch of the imprinted features. Left:AFM image of the PDMS stamp. Mean pitch is 670 nm. Right: AFM image of the imprinted surfaceat the apex (A in Fig. 2). Mean pitch is 820 nm.

Fabrication of nanostructures on double-curved PMMA surfaces by thermal imprint with PDMS stamp

http://orbit.dtu.dk/ws/files/5694181/P12-17%5B1%5D.pdf

Fabrication of nanostructures on double-curved PMMA surfaces by thermal imprint with PDMS stamp

Abstract

Similar works

Full text

Available Versions

Online Research Database In Technology