Jacobsen, Torben

Jensen, Søren Højgaard

Mogensen, Mogens Bjerg

Online Research Database In Technology

                       General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.  • Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal   If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim.     Downloaded from orbit.dtu.dk on: Dec 17, 2017Gas Concentration Impedance in an SOFC Plug Flow SetupJensen, Søren Højgaard; Mogensen, Mogens Bjerg; Jacobsen, TorbenPublished in:Meeting Abstracts - Electrochemical SocietyPublication date:2008Document VersionPublisher's PDF, also known as Version of recordLink back to DTU OrbitCitation (APA):Jensen, S. H., Mogensen, M. B., & Jacobsen, T. (2008). Gas Concentration Impedance in an SOFC Plug FlowSetup. In Meeting Abstracts - Electrochemical Society (pp. Abstract 431). Electrochemical Society, Incorporated.Gas concentration impedance in an SOFC plug flow setup  Søren Højgaard Jensen,  Mogens Mogensen, Torben Jacobsen  Risø National Laboratory Technical University of Denmark . Frederiksborgvej 399, 4000 Roskilde, Denmark   A significant part of the resistance in today's state-of-the-art Solid Oxide Fuel Cells (SOFCs) is attributed to gas concentration changes at the active sites of the electrodes. The change in the gas concentrations occurs when reactants in the gas are electrochemically converted into products as current is passed through the cell. Here we present a model of the gas concentration impedance of an SOFC in a plug flow setup and use it as a diagnostic tool on experimental findings. The gas concentration impedance depends on the current distribution in the electrode. A non-uniform distribution of the resistance in the electrode will consequently affect the gas concentration impedance.   An anode supported SOFC was tested as a steam electrolysis cell at 850 °C. The current density was -0.25 A/cm2 and the gas composition to the Ni/YSZ electrode was 99 vol% H2O and 1 vol% H2 at a rate of 12 l/h. O2 was purged to the LSM/YSZ electrode at a rate of 20 l/h. The cell performance decreased significantly during the electrolysis operation resulting in a significant increase in the cell impedance. (Figure 1) The time delay after onset of the electrolysis operation where the spectra were recorded is presented in Table 1.    Figure 1. Impedance spectra recorded on an SOFC during steam electrolysis operation.  Table 1. Time delay after onset of electrolysis operation. Spectrum A1 A2 A3 A4 A5 [hours] 10 88 131 157 229   The low frequency arc in the impedance spectra is identified as the gas conversion impedance. Note how this arc increases during the electrolysis operation. We relate the increase of the arc to a redistribution of the current through the electrode, due to a build-up of a non-uniform distribution of the resistance in the electrode.   213th ECS Meeting, Abstract #431, © The Electrochemical Society

Gas Concentration Impedance in an SOFC Plug Flow Setup

http://orbit.dtu.dk/ws/files/4462879/jensen.pdf

Gas Concentration Impedance in an SOFC Plug Flow Setup

Abstract

Similar works

Full text

Available Versions

Online Research Database In Technology