Controlled dispersion Nitroxide Mediated Polymerization (NMP) of methyl methacrylate (MMA) was successfully carried out for the first time in supercritical carbon dioxide (scCO2) in the presence of CO2-philic perfluorinated surfactant that was generated “in situ”. The control of the MMA polymerization relies on the strategy developed by Charleux et al. that consists of using a SG1-based alkoxyamine, i.e. the block-builder, in the presence of small amount of styrene. In a first step, CO2 soluble polyheptadecafluorodecylacrylate was prepared in scCO2 using block-builder as an alkoxyamine. In a second step, nitroxide SG1 mediated dispersion polymerization of MMA was conducted at 70°C and 300 bar in the presence of 5 w% of SG1 terminated surfactant compared to the monomer. Different monomer to alkoxyamine molar ratios were investigated in order to target different molecular weights. In each case, the monomer conversion was high (>90 %), the experimental molecular weight was in good agreement with the theoretical value and the polydispersity was narrow (Mw/Mn ~1.2). Moreover, after depressurisation of the cell, PMMA was collected as a free flowing powder consisting of small sized microspheres