Busk, Louise L.

Dufva, Martin

Online Research Database In Technology

  General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.   Users may download and print one copy of any publication from the public portal for the purpose of private study or research.  You may not further distribute the material or use it for any profit-making activity or commercial gain  You may freely distribute the URL identifying the publication in the public portal  If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim.         Downloaded from orbit.dtu.dk on: Mar 30, 2019Cheap fabrication of solid phase droplet microfluidics chips for single moleculestudiesBusk, Marie Louise Laub; Dufva, MartinPublication date:2018Document VersionPublisher's PDF, also known as Version of recordLink back to DTU OrbitCitation (APA):Busk, L. L., & Dufva, M. (2018). Cheap fabrication of solid phase droplet microfluidics chips for single moleculestudies. Poster session presented at Lab-on-a-Chip and Microfluidics World Congress 2018, Coronado Island,San Diego, United States.Cheap fabrication of solid phase droplet microfluidics chips for single molecule studiesLouise L. Busk, Martin Dufva  - Dept. of Micro- and nanotechnology, Technical University of Denmark, 2800. Kgs. LyngbyIntroductionMicrodroplet arrays are used for compartmentalization of biochemical reactions. They enable single molecule detection with great sensitivity[1], which is particularly interesting in e.g. molecular diagnostics[2] and high-throughput screening. The availability of such platforms depend on price and ease of fabrication. Here, we present an easy to fabricate hydrophilic in hydrophobic droplet array chip for less than $10 per chip.Figure 1: Photograph of a 2 µL drop-let on FluorAcryl 3298 taken using a drop shape analyzer. The contact an-gle is measured to be 100°.Properties of FluorAcryl 3298CYTONIX FluorAcryl 3298 is a negative tone, hydrophobic photoresist based on fluorinated acrylate. The contact angle with water was measured to be 100° after UV curing and development (Figure 1). FluorA-cryl 3298 is photopatternable through standard photo-lithographic methods. Besides being hydropho-bic and oleophobic, FluorAcryl 3298 has good chemical resistance and is anti-fouling.   Fabrication of microdroplet arraysMicrodroplet arrays were produced by spin coating a thin film of FluorAcryl, then, the solvent was evaporated by heating the wafer to 80°C. Masked UV exposure produced a pattern in the FluorAcryl film, visible after dissolving the uncured resist in ei-ther ethyl acetate or butyl acetate (see Fig. 2). Figure 2: Fabrication steps for making FluorAcryl arrays on glass wafersFigure 3: Film thickness vs. FluorAcryl concentration (30 s at 3000 rpm). Error bars represent std (n=3).DispenseSpinBakeExposeDevelopResultsThe thickness of the FluorAcryl film was primarily dependent on the concentration of FluorAcryl when spin coating the wafer. Dilution in ethyl or butyl acetate to between 10 and 50 %w/w pro-duced films 200 to 2000 nm thick measured using a stylus profilometer (see Fig. 3). SEM inspection (see Fig. 4) in combination with topological measurements using a stylus profilometer revealed that photo patterning was complete, and microscope images of aqueous droplets supported this (see Fig 5).   ConclusionFluorAcryl 3298 has advantageous properties for fabricating microdroplet arrays. Other flu-orinated polymers has been used for this pur-pose[3], however at a much higher price. Here we have shown that FluorAcryl 3298 is pho-topatternable using a single step lithographic process, and that arrays fabricated in this man-ner can support aqueous droplets.[1] Y. Rondelez et al., Nat. Biotech., 2005, 23(3), 361-365[2] D. M. Rissin et al., Nat. Biotech., 2010, 28(6), 595-599[3] R. Iino et al., Lab Chip, 2012, 12, 3923-3929Figure 4: SEM micro-graph of 25 µm in diameter holes in a 175 nm thick film of FluorAcrylFigure 5: Aqueous droplets 25 µm in diameter on patterned Fluor-Acryl.Contact meE-mail: mallbu@nanotech.dtu.dkDept. of Micro- and NanotechnologyTechnical University of Denmark2800 Kgs. Lyngbywww.linkedin.com/in/louiselaubbusk

Cheap fabrication of solid phase droplet microfluidics chips for single molecule studies

http://orbit.dtu.dk/ws/files/164316073/Untitled.pdf

Cheap fabrication of solid phase droplet microfluidics chips for single molecule studies

Abstract

Similar works

Full text

Available Versions

Online Research Database In Technology