Abstract 

This paper proposes a neighborhood search to solve scheduling for fabrics making in a textile industry. 

The production process consists of three production stages from spinning, weaving, and dyeing. All 

stages have one processor. Setup time between two consecutive jobs with different color is considered. 

This paper also proposes attribute’s decomposition of a single job to classify available jobs to be 

processed and to consider setup time between two consecutive jobs. Neighborhood search (NS) algorithm 

is proposed in which the permutation of set of jobs with same attribute and the permutation among set of 

jobs is conducted. Solution obtained from neighborhood search, which might be trapped in local solution, 

then is compared with other known optimal methods

Kurniawan, Bobby

Sumihartati, Atin

Totong,

English

Sebelas Maret Institutional Repository

Performa (2011) Vol. 10, No. 2: 83 - 88  A Neighborhood Search for Sequence-dependent Setup Time in Flow Shop Fabrics Making of Textile Industry  Atin Sumihartati∗1, Totong1, Bobby Kurniawan2 1The School of Textile Technology, Jl. Jakarta 31, Bandung 2Department of Industrial Engineering, University of Sultan Ageng Tirtayasa, Banten  Abstract This paper proposes a neighborhood search to solve scheduling for fabrics making in a textile industry. The production process consists of three production stages from spinning, weaving, and dyeing. All stages have one processor. Setup time between two consecutive jobs with different color is considered. This paper also proposes attribute’s decomposition of a single job to classify available jobs to be processed and to consider setup time between two consecutive jobs. Neighborhood search (NS) algorithm is proposed in which the permutation of set of jobs with same attribute and the permutation among set of jobs is conducted. Solution obtained from neighborhood search, which might be trapped in local solution, then is compared with other known optimal methods.  Keywords: flow shop, neighborhood search, sequence-dependent setup time, textile industry.   1. Introduction Textile industry is one of important industries in Indonesia. There are several characteristics textile industry has which differ from other industries. The main characteristics are intensively machine and labor usage, multi-stage process, and vast variety of finished products. Scheduling in textile industry is challenging because there are many aspects must be taken into account, such as multi-item products and multi-stage process. In this paper, scheduling-problem for fabrics making in a textile company is discussed. The fabrics making transforms raw material into different types and different colored fabrics, consists of three production stages from spinning, weaving, and dyeing. Every job follows the same routing. Each stage has one processor. Setup time between two consecutive jobs with different color is considered. The characteristics of the scheduling problem are identified as: multi-stage production, single machine flow shop, and sequence-dependent setup times. Attribute’s decomposition of a single job is proposed to classify available jobs to be processed and to consider setup time between two consecutive jobs. This paper is organized as follows: section 2 briefly reviews previous researches in textile industry and related scheduling-problem which similar to real problem; section 3 describes finished products and production system which textile company posses; section 4 introduces the problem formulation and explain the notations used throughout the paper; numerical example is given in section 5 to explain the proposed heuristic algorithm and the result is compared with shortest processing time (SPT) rule; and finally the paper’s results is concluded in section 6.  2. Literature Review In order to solve the real scheduling-problem in fabrics making, literature review is grouped into two broaden subjects: first, previous research in textile industry and second, related scheduling literatures which similar to our problem.                                                             ∗ Correspondance : fh_atin@yahoo.co.id  84    Performa (2011) Vol.10, No. 2   2.1. Research in Textile Industry Literatures on textile industry as a case study, especially scheduling problem, are not as many as on other process industry. However, several authors, especially from academia, have contributed to publish their work in textile industry. Karacapidilis et al. (1994) developed Master Production Schedule (MPS) for textile industry. Toni et al. (2000) investigated how decision variables in production planning, i.e. planning period, material availability, effects on apparel industry time performance. Wu et al. (2002) utilized GA method to optimize fiber-dyeing manufacturing process subject to environment regulation, waste minimization alternatives, and resource limitation. Silva et al. (2006) solved lot sizing and scheduling problem found in spinning process. Zarandi et al. (2007) built a systematic fuzzy system modeling for scheduling of fabrics-dyeing manufacturing. Chen (2009) developed scheduling under machine breakdown for yarn making company with minimizes the maximum tardiness. Heuristic and branch-and-bound algorithm was developed to solve the problem. Elamvazuthy et al. (2009) used fuzzy programming to solve production planning model in cutting and sewing department. Hsu et al. (2009) proposed GA methodology to solve sequence-dependent setup time, group-delivery (a group of jobs pertaining to a particular customer order must be delivered together) of yarn-dyed textile production.  To the best to our knowledge, there hasn’t been a paper describes the production system similar to our problem completely, particularly in scheduling problem. Some paper described yarn or fibers making, others described garment separately from yarn making. While our production system produces fabrics from raw material.  2.2. Sequence-Dependent Setup Time In recent years, most of papers in scheduling explicitly consider setup time between jobs. Many papers have assumed setup times depend on the type of job just completed as well as on the type about to be processed. Quadt et al. (2006) gave a complete review about taxonomy of flexible flow line scheduling, including sequence-dependent setup time. Below are examples of authors that include setup time. Gupta et al. (2006) proposed algorithms for single machine total tardiness scheduling with sequence dependent setups. Gicquel et al. (2009) investigate discrete lot-sizing and scheduling problem with sequence-dependent changeover times. For our problem, sequence-dependent setup time is found in dyeing process. Ordering red colored fabrics after black colored fabrics in dyeing process requires more preparation time than ordering red fabrics preceded black fabrics. Preparation in dyeing process such as cleaning the bath from previous usage is a must in order to ensure the color quality of fabrics.  Another feature in our problem is product decomposition into attributes. Silva et al. (2006) used brightness as an attribute to classify the product in spinning process. Gicquel et al. (2009) proposed bottle size and liquid composition as attributes for their work in bottle filling industry. Attribute decomposition in flow shop scheduling that considers setup time also discussed by Kurniawan (2011), which proposed a heuristic approach to solve the corresponding problem. Although it showed that the proposed heuristic was far superior that traditional Shortest Processing Time (SPT), the solution was far from global optimal. Furthermore, no evidence it can be implemented in computer program. This paper tries to extend it by employing local search in which permutation of jobs in a set of jobs with same attribute and permutation of sets are conducted.  2.3. Neighborhood Search Most scheduling problems are of NP-hard class. For small problems, analytical and enumerative approaches might suffice to solve the problems in reasonable time. However, as the problems get bigger analytical approaches will not be efficient anymore. Heuristics and meta-Sumihartati, Totong, dan Kurniawan - A Neighborhood Search for Sequence-dependent Setup …  85       heuristics approaches are suitable to solve big scheduling problem although they produce feasible solution. Meta-heuristics algorithm can be categorized as local search and evolutionary search. Neighborhood search (NS), tabu search, and scatter search belong to the first whereas genetic algorithm (GA), particle swarm optimization, to name a few, belong to the later. One disadvantage that many researches try to handle of meta-heuristics approaches is the algorithm might be trapped in local optima solution. Many researches have been done and reported successfully to solve the scheduling problem with good solution in a reasonable time. Lei and Wang (2011) proposed a neighborhood search algorithm to solve flow shop of batch processing machines. Local search are conducted to make jobs permutation in a batch and batch permutation. The solutions were compared with GA. NS also can be applied to others problem such as cell formulation as proposed by Elbeani, et. al. (2012). NS was combined with GA to get the time-efficient and good solution.    3. Fabrics Making Process Fabrics making consists of three stages process. Fig.1 depicts fabrics making process and product transformation in textile company. First process is spinning. Spinning process transforms raw material into different diameter of yarn. Currently the company uses three types of raw material to produce yarn: polyester, cotton, and rayon. Furthermore, from these three types of raw material, each of raw materials can be produced into different diameter yarn, namely 20, 32, 40, 50, 55, and 60. Thus from available raw materials, spinning process capable of producing 18 types of yarn, combination of the number of raw material and yarn diameter. Yarn produced in spinning process then transferred into weaving process. The yarn is woven become fabrics according to the customer specification. Note that in weaving process, we can ignore the fabrics attribute mainly because weaving machine can be adjusted to meet customer requirement.   C o lo re d    F a b r ic s  Y a rn  D ia m e t e r  2 0 ,  3 2 ,  4 0 ,  5 0 ,  5 5 ,  6 0  U n c o lo r e d   F a b r i c s  R a w  m a t e r ia l  P E ,  C o t t o n ,  R a y o n     S P IN N IN G          S T A G E   W E A V IN G          ST A G E       D Y E IN G          ST A G E   Fig.1. Production Process of Fabrics Making  The last process is dyeing. In this process, uncolored fabrics then are colored as per customer order. There are many possibilities of customer color order. Cleaning dyeing bath is required each time switching jobs with different color. Hence setup times depend on job sequencing.  4. Mathematical Formulation Scheduling problem is built on several assumptions. First, job pre-emptive is not considered. Second, material shortage never occurs. Third, there are no machine breakdowns. Lastly, we don’t consider order change for all jobs. The problem is formulated using the following notations: Indices i Job index. j  Attribute: raw material index. k Attribute: yarn diameter index. l Attribute: color index. 86    Performa (2011) Vol.10, No. 2   Table 1. Processing time of available jobs Job i 1 2 3 4 5 6 7 8 psijk 23 33 30 36 40 28 24 22 pwijk 88 86 61 67 81 72 67 85 pdijk 38 32 22 33 44 39 42 28    Follower attribute l   Attribute l 1 2 3 1 0 8 14 2 7 0 5 3 13 14 0 Table 2. Sequence-Dependent Setup Times   Follower attribute k   Attribute k 1 2 3 1 0 7 11 2 7 0 10 3 11 10 0 Parameters n  Number of jobs. f  Number of raw materials. g  Number of yarn diameters . h  Number of colors. jkliJ  Job i, with attribute j, k, and l.  ijklsp  Processing time of job i, with attribute j, k, and l in the first stage process.  ijklwp  Processing time of job i, with attribute j, k, and l in the second stage process. ijkldp  Processing time of job i, with attribute j, k, and l in the third stage process. *kis  Setup time if job i with attribute k is processed after job with attribute k*. *lis  Setup time if job i with attribute l is processed after job with attribute l*.  Objective function Minimize ( ) ( )* *1 1 1 1f gn hs k w d lijkl i ijkl ijkl ii j k lZ p s p p s= = = == + + + +∑∑∑∑  (1)  An NS algorithm is proposed as a solution approach for the problem formulation above. Next section will discuss the proposed algorithm along with the numerical example.  5. Results and Discussions Proposed NS algorithm is tested using processing time data in Table 1 whereas Table 2 presents matrix of sequence-dependent setup time for spinning process and sequence-dependent setup time data for dyeing process is presented.      There are 8 jobs that must be processed in three flow shop machines. Each stage has single processor. The list of the corresponding jobs as follows:  Job 1: Yellow fabrics made from rayon-yarn diameter 40  Job 2: Red fabrics made from polyester-yarn diameter 40  Job 3: Blue fabrics made from cotton-yarn diameter 20 Job 4: Red fabrics made from polyester-yarn diameter 32  Job 5: Blue fabrics made from rayon-yarn diameter 20  Job 6: Yellow fabrics made from cotton-yarn diameter 32  Job 7: Blue fabrics made from polyester-yarn diameter 20  Job 8: Blue fabrics made from rayon-yarn diameter 40        5. 1. Neighborhood Search (NS) Algorithm The proposed NS algorithm is as follows.  Step 0. Initialize the solution with attribute decomposition. Compute Z* and denote the incumbent solution x* as optimal solution.  Step 1.  For each job in the set of attribute, do the local search. Compute Z1 for this sequence. If Z1 is better than Z*, set Z1 as the new incumbent of optimal solution. Go to step 2.a. Otherwise, go to step 2.b.  Sumihartati, Totong, dan Kurniawan - A Neighborhood Search for Sequence-dependent Setup …  87       Step 2.a. For each set of jobs, do the local search. Compute Z2 for this sequence. If Z2 is better than Z1, set Z2 as the new incumbent of optimal solution. Go to step 3. Otherwise, go to Step 2.b.  Step 2.b. Set Z* as the optimal solution from Step 1 and Step 2.a. Go to Step 3.  Step 3. Repeat Step 1 through Step 2.b. until no better solution found.           5. 2. Results and Discussions In this section, we present the numerical examples to test the proposed algorithm. First, the problem presented in the previous section is solved using the proposed algorithm and then the results are compared with integer programming (IP) solution obtained by IBM ILOG CPLEX solver. Time processing and solution are chosen as comparison. Second, experimental is conducted using hypothetical data. The proposed algorithm is implemented using C++ and running on Pentium 4 1 GB RAM. The experimental is running 50 times for each set hypothetic data. Table 3 shows the results of experiment based on the hypothetic data. Time computation is taken from the average of 50 data. The best solution from the 50 run is taken as the comparison with optimal solution from ILP formulation. Deviation of the NS solution is computed with respect to optimal solution.  Table 3. Results comparison Number of  jobs NS IP Solver Time average (s)  Best Solution Deviation from optimal solution Time (s) Optimal Solution 8 1.02 56 19.15% 1.00 47 9 1.50 62 8.77% 1.03 57 10 1.98 52 13.04% 2.05 46 11 2.00 43 13.16% 2.23 38 12 2.18 47 11.90% 2.21 42 13 2.20 45 9.76% 3.05 41 14 2.21 43 13.16% 3.12 38  Fig. 4 shows the time computation by NS and IP. It can be seen that for a small number of job instances, i.e. less than 10, IP solved by solver outperform the NS. However for relatively larger instances, time computation performed by NS is more superior to ILP. In the real system, number of jobs that must be scheduled commonly more than 20 even hundreds of jobs. This brings implications that our proposed NS might be suitable for real system condition. However as we depict in Fig. 5 the pitfall of NS in finding optimum solution. The proposed NS deviation is ranged between 8-19% bigger than the optimum solution. This means there are many things that must be improved in order the proposed NS can be applied into practice.    Fig.4. Time Computation Comparison   Fig. 5. Solution Comparison   Fig.2. Local Search in A Set With Same Attribute  Fig.3. Local Search between Set with Same Attribute 88    Performa (2011) Vol.10, No. 2   6. Conclusions The neighborhood search (NS) algorithm is proposed to solve the flow shop multi stage process which considers sequence-dependent setup time in fabrics making. The experiment showed the proposed NS algorithm must be improved in order to be implemented to solve real scheduling problems. Although time computation is more reasonable than IP for a large number of jobs instances, the solution gap is still wider from optimum solution. The proposed NS can be improved so as to avoid early local optima trap in the future research.  Acknowledgment The authors wish to thank the referees and editor members of Performa Universitas Sebelas Maret Surakarta for their support and helpful comments on this paper. The author also wishes grateful to the Textile Company for valuables information.  References Kurniawan, B. (2011). A Heuristic Algorithm for Scheduling Fabrics Making in Textile Industry. Proceedings of Seminar Nasional Industrial Services (SNIS) 2011, Cilegon. Baker, K. R. and Trietsch, D. (2009). Principles of Sequencing and Scheduling, John Wiley & Sons, Inc.  Chen, W. J. (2009). Scheduling with dependent setup and maintenance in a textile company. Journal of Computers and Industrial Engineering, 57, 867-873. Elamvazuthi, I., Ganesan, T., Vasant, P., and Webb, J. F. (2009). Application of fuzzy programming technique to production planning in the textile industry. International Journal of Computer Science and Information Security, 6(3). Elbeani, B., Ferland, J.A., and Bellemare, J., (2012). Genetic algorithm and large neighbourhood search to solve the cell formation problem. Expert Systems with Applications, 39, pp.  2408–2414. Gicquel, C., Miegenville, N., Minoux, M., and Dallery, Y. (2009). Discrete lot sizing and scheduling using product decomposition into attributes. Computer and Operations Research, 36, 2690-2698. Gicquel, C., Minoux, M., and Dallery, Y. (2009). On the discrete lot-sizing and scheduling problem with sequence-dependent changeover times. Operations Research Letters, 37, 32-36. Gupta, S. R. and Smith, J. S. (2006). Algorithms for single machine total tardiness scheduling with sequence dependent setups. European Journal of Operational Research, 175, 722–739. Hsu, H. M., Hsiung, Y., Chen, Y. Z., and Wu, M. C. (2009). A GA methodology for the scheduling of yarn-dyed textile production. Expert Systems with Applications International Journal, 36, 12095-12103. Karacapilidis et al., (1994). Production planning and control in textile industry: case study. Computers in Industry, 30, 127-144. Lei, D. and Wang, T., (2011). An effective neighborhood search algorithm for scheduling a flow shop of batch processing machines. Computers & Industrial Engineering, 61, pp. 739-743. Quadt, D. and Kuhn, H. (2007). A taxonomy of flexible flow line scheduling procedures. European Journal of Operational Research, 178, 686-698. Silva, C. and Magalhaes, J. M. (2006). Heuristic lot size scheduling on unrelated parallel machines with applications in the textile industry. Computers and Industrial Engineering, 50, 76-89. Toni, A. and Meneghetti, A. (2001). The production planning process for a network of firms in the textile-apparel industry. Int. Journal Production Economics, 65, 17-32. Wu et al. (2002). Global strategy for optimizing textile dyeing manufacturing process via GA-based grey nonlinear integer programming. Computers and Chemical Engineering, 27, 833-854. Zarandi M. H. F, Esmaeilian, M., and Zarandi M. M. F (2007). A systematic fuzzy system modeling for scheduling of textile manufacturing system. International Journal of Management Science and Engineering Management, 2(4), 297-308.  

A GA methodology for the scheduling of yarn-dyed textile production. Expert Systems with

A Heuristic Algorithm for Scheduling Fabrics Making in Textile Industry.

A systematic fuzzy system modeling for scheduling of textile manufacturing system.

A taxonomy of flexible flow line scheduling procedures.

Algorithms for single machine total tardiness scheduling with sequence dependent setups.

An effective neighborhood search algorithm for scheduling a ﬂow shop of batch processing machines.

Application of fuzzy programming technique to production planning in the textile industry.

Discrete lot sizing and scheduling using product decomposition into attributes.

Genetic algorithm and large neighbourhood search to solve the cell formation problem.

Global strategy for optimizing textile dyeing manufacturing process via GA-based grey nonlinear integer programming.

Heuristic lot size scheduling on unrelated parallel machines with applications in the textile industry.

On the discrete lot-sizing and scheduling problem with sequence-dependent changeover times.

Principles of Sequencing and Scheduling,

Production planning and control in textile industry: case study.

Scheduling with dependent setup and maintenance in a textile company.

The production planning process for a network of firms in the textile-apparel industry.

A Neighborhood Search for Sequence-dependent Setup Time 

in Flow Shop Fabrics Making of Textile Industry

http://eprints.uns.ac.id/1416/1/2_10_2_AS_TTG_BK_P83_P88.pdf

A Neighborhood Search for Sequence-dependent Setup Time in Flow Shop Fabrics Making of Textile Industry

Abstract

Similar works

Full text

Available Versions

Sebelas Maret Institutional Repository