Over the past two decades, Computational Thermodynamics and Kinetics have been tremendously contributed to materials modeling and simulations and the demands on quantitative

conceptual design and processing of various advanced materials arisen from various industries and academic

institutions involved in materials manufacturing, engineering and applications are still rapidly increasing

Agren, John

Chen, Qing

Engström, Anders

Hillert, Mats

Höglund, Lars

Shi, Ping-Fang

Sundman, Bo

English

International audienceOver the past two decades, Computational Thermodynamics and Kinetics have been tremendously contributed to materials modeling and simulations and the demands on quantitative conceptual design and processing of various advanced materials arisen from various industries and academic institutions involved in materials manufacturing, engineering and applications are still rapidly increasing

HAL: Hyper Article en Ligne

Computational Thermodynamics and Kinetics in Materials Modelling and Simulations

Höglund, Lars,

Qing, Chen

Sundman, Bo,

Ågren, John,

Hillert, Mats,

Swepub

Computational thermodynamics and kinetics in materials modelling and simulations

Over the past two decades, Computational Thermodynamics and Kinetics have been tremendously contributed to materials modeling and simulations and the demands on quantitative conceptual design and processing of various advanced materials arisen from various industries and academic institutions involved in materials manufacturing, engineering and applications are still rapidly increasing

Open Archive Toulouse Archive Ouverte

Proceedings of Sino-Swedish Structural Materials Symposium 2007 Computational Thermodynamics and Kinetics in Materials Modelling and Simulations SHI Ping-fang', Anden Engstrom ', Lars Hoglund CHEN Qing', Bo Sundman 2, John &ren2 , Mats Hillert (1.Thermo-Calc Software AB, Stockholm Technology Park, SE-113 47 Stockholm, Sweden.2.Department of Materials Science and Technology, Royal Institute of Technology. SE-100 44 Stockholm, Sweden) Over the past two decades, Computational Thermodynamics and Kinetics have been tremendously contributed to materials modeling and simulations and the demands on quantitative conceptual design and processing of various advanced materials arisen from various industries and academic institutions involved in materials manufacturing, engineering and applications are still rapidly increasing. Through a sophistic combination of thermodynamickinetic models, computation techniques, databases and application programming interfaces, it is possible to predict material compositions, structures and properties resulted from various material processes. There have been several types of approaches involving computational thermodynamics and kinetics, which prove to be very successful in modelling and simulations of various materials: CALPHAD (Computer Coupling of Phase Diagrams and Thermochemistry), first-principles calculations (e.g., ab initio, DFT-Density Function Theory), MD (Molecular-Dynamics simulations), MC (Monte-Carlo simulations), Phase-Field simulations, CFD (Computational Fluid Dynamics), FEM/FDM (Finite Element Methods & Finite Difference Methods), among others. The extended CALPHAD approach aims to promote Computational Thermodynamics and Kinetics to improve understanding of various industrial and technological processes in materials modeling and simulations, through the MSDI developments: Models [representing thermodynamic properties and kinetic parameters for various phases/systems/processes] that permit predictions of phase equilibria, phase properties and phase transformations of multicomponent systems; Software [for thermodynamic calculations (e.g., Thermo-Calc, FACTSage, MTDATA, GEMINI, HSC, Pandat and JMatPro) and for kinetic simulations (e.g., DICTRA, MICRESS and PrecipiCalc)] that can be used to optimize and derive thermodynamic properties and kinetic parameters, and perform various thermodynamic calculations and kinetic simulations that are required in materials designs and processing; Databases [of thennodynamic properties and kinetic parameters] that are self-consistent and contain critically-assessed data based on available experimental measurements (of various thermochemical and phase equilibrium data, as well as of phase transformation information), empiricdsemi-empirical equations and theoretical results (such as first-principles calculations); and Interfaces [for application programming] that allow plugging the thermodynamic calculation and kinetic simulation engines into user-own application programs or third-party software packages, for more advanced or more specific calculations/simulations. The SGTE (Scientific Group Thermodata Europe) organization has been significantly contributing to the developments and applications of the CALPHAD approach since 1979. Associated with some software available within the CALPHAD community, several high-quality databases have been developed by SGTE and its members through various intemationahational research projects, and by some other related organizations. 210 Proceedings of Sino-Swedish Structural Materials Symposium 2007 The Thermo-Calc/DICTRA software, database and programming interface packages [5-111 have been developed over the past 35 years, aimed at providing materials scientists and engineers with comprehensive assisting tools in their daily work of materials design and processing. This presentation will primarily focus on these two packages as the leading tools in the field of Computational Thermodynamics and Kinetics, and their applications in materials modelling and simulations. Thermo-Calc is one of the most common software in the field of Computational Thermodynamics, which can calculate complicated heterogeneous phase equilibria and multi-component phase/property diagrams for many different types of materials. DICTRA is one of a few software currently available that can precisely simulate diffusion-controlled phase transformation in multicomponent metallic systems. DICTRA uses Thermo-Calc as its engine for all kinds of thermodynamic calculations, but extends to applications with complex kinetic problems engaged. They are most renowned worldwide for their powerful functionality, unique facilities, user-friendliness and wide applications, as well as for their flexible application programming interfaces ( ie . ,  TQ and TCAPI), easy-to-use toolboxes and links built in third-party software packages (e.g., TC-Toolbox in MATLAB, and TC/DICTRA-Engine in MICRESS, PrecipiCalc, Hybrill and CAMDS), and complete GUI-driven graphical interfaces ( ie . ,  TCW). Furthermore, the PARROT module available in the Thermo-CalcDICTRA software can be utilized for critical assessments and database developments. Both software systems have been connected with many high-quality and internally-consistent thermodynamic and kinetic databases. At present moment, a wide spectrum of Thermo-Calc and DICTRA databases are available for various steel fie-alloy s, Ni-based superalloy s, Ti-/Al-Mg-/Cu-En-Er-based alloys, solder alloys, metal powders, ceramics, fuel-cell materials, slag, semi-/super-conducton, noble metals, minerals, nuclear materials, molten salts, aqueous solution, organic materials, and so on. With the Thermo-Calc software and various thermodynamic databases, one can achieve, among others, Phase diagrams (binary, ternary, isothermal, isoplethal, etc.) for systems with up to 5 independent variables; Thermodynamic properties of pure substances, compounds and solution phases; Thermodynamic properties of chemical reactions; Contributions from magnetic ordering, chemical ordering, surface tension, electrostatic state, etc.; Thermodynamic and transport properties of aqueous solutions over a wide T-P-X range (incl. critical region); Property diagrams (G H, S, r! C,,, C,, a: X, erc.) for systems with up to 40 components; Heterogeneous interactions and partition coefficients for systems with up to 40 components; Pourbaix diagrams and many other diagrams for aqueous-involving interaction systems; Ellingham diagrams, Boudouard diagrams, potential diagrams, partial gaseous pressures (fugacities), etc.; Scheil-Gulliver simulations of solidification and heat evolution for alloys with back diffusions of interstitials; Liquidus surfaces, “7-volume”, and primary solidus projections for multicomponent alloys; CVD diagrams, thin-film formation; CVM calculations on chemical Oxide-layer formation on steel surfaces, Speciation in corrosion, recycling, remelting, Evolution of hydrothermal, metamorphic, Simulations of Carnot cycles, glass transitions; Meta-stable equilibria, para-equilibria; Special quantities: e.g., To, A3-ternperahm. Thermodynamic factors and driving forces which orderingdisordering phenomena; steeUalloy refining, so-called PRE numbers; sintering, incineration, combustion; volcanic, sedimentary, weathering processes; adiabatic T, chill factors, aT/aX, etc.; 211 Proceedings of SineSwedish Structural Materials Symposium 2007 are important quantities for dynamic process simulations ; Simulations of steady-state reactors or dynamic reactors; Critical assessments of experimental data, and establishment and modification of thermodynamic databases. The DICTRA software and mobility databases, coupled with the Thermo-Calc software and thermodynamic databases, has been applied to solve several problems of scientific and practical interest, such as: Solidification and microsegregation in steels; Gradient sintering of cemented carbides; Coarsening of y'-precipitates in nickel base alloys; Carburization and decarburization of steels; Carburization of High-Temperature alloys; Nitriding and Nitrocarburizing of steels; Austenite/ferrite diffusional transformations in steels; Calculation of CCT and TlT diagrams; Interdiffusion in coatingkubstrate compounds; Growth of pearlite in alloyed steels; Microstructures of alloys; Partitionless transformations under para-equilibrium; tracer-, self-, intrinsic- and interdiffusivities); Calculations of various diffusion coefficients (e.g., Critical assessments of experimental data, and Using the TQ/TCAPI programming interfaces and establishment and modification of mobility databases. Fig. 1. Tkrmo-Calc Calculation Example: Isopletlts for a HSLA steel, exploring how a small addition of nitrogen can change pbase diagram and change the properties of material. Alloy content is Fel.SMn-03Si-O.1V-C (in wt%). V(C,N) particlesactmgrainrefiwrs Fig. 2. Thermo-Calc Calculation Example: Simulation dsdidllication paths and microsegressions for two Fe-based alloys with bulk compositions d Fe-0.3Co-3.9Cr-0.1Co-O.3ZMn4.9M~O~i-03Si-6.lW-l.9V-O.88C and Fe-1OCr-lC (wt%), respectively 212 Proceedines of Sino-Swedish Structural Materials SvmDosium 2007 Fig. 3. Thermo-Calc Calculation Example: Pourbaix diagrams and property diagnms for hehmgeneous interaction systems between 0.001 m of steel [Fe-5Cr-5Ni mole%] and 1 kg of water (and with 3 m NaCI), at 2OOoC and 100 bar), and between 0.1 g of steel [Fe-17.00Cr-12.00Ni-2.5Mo (wt%)] and 1 kg of water (and with 0537 m H2SO4, at 85d: and 1 bar), respectively 0.204 I- Distance (CLm) W Fig. 4. DICTRA Simulation Example: Simulation of interdiffusion phenomena in a complex dif€usion couple between IN100 and IN738 alloys Fig. 5. DICTRA Simulation Example: Simulations of growth of ferrite into austeuite in an Fe-2.02%Ni-O.O885%C alloy at 973 K (Result for local equilibrium at phase interface is compared with paraequilibrium assumption and recent experimental data), and of TIT diagram for FCC+P-phase transformation in an Ni-21.1%Cr-l35%Mo alloy 213 Proceedings of SineSwedish Structural Materials Symposium 2007 t t  t -- Fig. 6. Pmgramming Interfaces - Application Example: Simulations of dendrite formation (growth of primary and secondary dendrites), using MICRESSTM softwate (developed by ACCESS) which interfaces with TQ; and of precipitation in a Ni-based superaUoy under a complex commercial heat treatment, using PrecipiCalP software (developed by QuesTek InnovationS) which interfaces with TCAPI TC-Toolbox in MATLAB, most of the quantities that are available from Thermo-Calc (and to some extents from DICTRA) can be obtained, e.g., temperature, pressure, volume, chemical potential, phase amount, phase composition, partition coefficients, liquidus or solidus points, invariant temperature, heat of reaction, adiabatic combustion temperature and diffusion coefficients (when used in conjunction with a suitable mobility database). Furthermore, they can be applied not only to equilibrium calculations but can also be used to predict metastable or non-equilibrium states by changing the status of the phases under consideration. Examples of quantities and properties that can be calculated using the programming interfaces are, among others: Amount and composition of phases; Liquidus and solidus temperatures; Thermochemical properties, e.g. C,,, vyous derivatives of state variables, e.g. a G+d,+j  ; g . d  axi , Driving forces; Diffusion coefficients; Partition coefficients; Invariant temperatures; Thermodynamic limits for partitionless transformations under para-equilibrium and quasi-paraconditions. Such packages have been applied world-widely in steellalloys-making and metallurgical industries, specific-alloy design and engineering, chemical engineering, hydrometallurgy, powder-metallurgy, materials applications (in e.g., car and automotive industries, heavy industries, telecommunication industries, precise-equipment industries, aeronautic and astronautic industries, defense industries, petroleum industries, polymer industries, food industries, erc.), energy conversions and utility, earth materials, geochemical and natural-resource exploitations, nuclear power-plant safety and nuclear waster-repository assessments, aqueous chemistry, materials corrosion, environmental protections, and so forth. The great capacities in calculating material properties, predicting material structures and simulating material processes have been demonstrated by many successful applications of the Thermo-CalcDICTRA software, database and programming interface packages in industrial and academic R&D activities “-241. Some proven examples of using these software, databases and programming interfaces for enhancements in materials design and processing (especially in advanced steels/alloy s 214 Proceedings of Sino-Swedish Structural Materials Symposium 2007 research and development) will be shown in this presentation. Fig. 1 - Fig.6 illustrate a few such examples. Also be given will be some discussions on the further development of the Thermo-Calc/DICTRA software, database ' and programming interface packages in the near future. References: [l] GB. Olson: Science, 288 (2000), p. 993-998. And GB. Olson: Science, 277 (1997), p. 1237-1242. [2] I. Amato: Fortune (Ind. Man. Tech. Ed.), 141 (2000). p. 474[C]-474[V]. And: I. Amato: Fortune, 174 (1998), C. [3] U.R. Kattner, J.E. Morral, and W.J. Boettinger: J. Phase Equilibria, 24 (2003). p. 416-421. [4] G Chose: J. Phase Equilibria, 23 (2002). p. 310-328. [5] P. Shi, A. Engstrom, L. Hoglund, B. Sundman, and J. Agren: Materials Science Forum, 475-479 (2005), p. 3339-3346. 161 J.O. Andersson, T. Helander, L. Hoglund, P. Shi, and B. Sundman: Calphad, 26 (2002), p. 273-312. [7] A. Borgenstam, A. Engstrom, L. Hoglund, and J. Agren: J. Phase Equilibria, 21 (2000). p. 269-280. [8] B. Sundman and P. Shi: Electrochemical Society Proceedings, 97-39 (1997), p. 52-59. [9] A. Engstrom, L. Hoglund, and J. Agren: Metall. Mat Trans A, 25A(1994), p. 1127-1134. [lo] J. Agren: Acta Metall, 30 (1992), p. 841-851. [Il l  B. Sundman, B. Jansson. and J-0. Andersson: Calphad, 9 (1985), p. 153-199. [ 121 H. Widmark: Scandinavian J. Metall, 20 (1991), p. 72-78. [ 131 N. Saunders and A.P. Modownik: CALPHAD (Calculation of Phase Diagrams): A Comprehensive Guide. (Cambridge, 1998). [14] T.A. Stephenson, C.E. Campbell, and GB. Olson: in R.J. Richmond and S.T. Wu, Eds., NASA Conf. Publ. 3172, 2 (1992), p. 299-307. [15] M. Apel, B. Bottger, H.-J. Diepers, and I. Steinbach: J. Crystal Growth, 237-239 (2002), p. 154-158. [I61 U. Grafe, B. Bottger, J. Tiaden, and S.G Fries: Scripta Materialia, 42 (2000). p. 1179-1186. [17] U. Grafe, D. Ma, A. Engstrom, and S.G Fries: in B.G Thomas and C. Beckermann, Eds., Modeling of Casting, Welding and Advanced Solidification Processes III (TMS, 1998), p. 227-234. [18] J. Li, C. Yang, and H. Dong: Materials and Design, 22 (2000). p. 39-43. [19] J.K. Kivilahti: JOM, 54 (2002), p. 52-57. [20] C.R. Hutchinson, A. Fuchsmann, and Y. Brechet: Metall. MatTrans A, 35A(2004),p. 1211-1221. [21] Q. Chen and B. Sundman: Materials Transactions, 43 (2002), p. 551. [22] MICRESSTM software (developed by ACCESS e.V.): http://www.access.rwth-aachen.de/ [23] F'recipiCalcTM software (developed by QuesTek Innovations LLC): http://www.questek.com/ 1241 HybrillTM software (developed by SSAB Tunnplit): http://www,ssabtunnplat.com/ [25] TCCTM, T W  and DICTRATM software, TQTM. TCAF'P and TC-MATLAB@ ToolboxTM programming interfaces (developed by Thermo-Calc Software): http://www.thermocalc.com/ 215 

CALPHAD (Calculation of Phase Diagrams): A Comprehensive Guide.

Electrochemical Society Proceedings,

F'recipiCalcTM software (developed by QuesTek Innovations

Materials Science Forum,

Science,

TCAF'P and TC-MATLAB@ ToolboxTM programming interfaces (developed by Thermo-Calc Software): http://www.thermocalc.com/

HAL Université de Toulouse, et Toulouse INP

https://hal.science/hal-03592176v1/document

Computational Thermodynamics and Kinetics in Materials Modelling and Simulations

Abstract

Similar works

Full text

Available Versions

HAL: Hyper Article en Ligne

Swepub

Open Archive Toulouse Archive Ouverte

HAL Université de Toulouse, et Toulouse INP