Davit arms are usually employed to handle doors of large size autoclaves. These arms require a guiding mechanism to guide the door in a desired path and locate in the desired position. In this work, various options of door handling / steering mechanisms were examined and finally a four bar mechanism is chosen for detailed design. A Geometric model was developed to understand the path traced by the door for

various link angles and lengths. Solid modeling of the door was carried out using Solidworks R and simulation of the path of the door for various angles and lengths of the links of the 4 bar mechanism was also done. The prototype model of the autoclave door was fabricated with a 4 bar mechanism mounted on the davit arm of the door. Number of trials were made by changing link lengths and angles to determine the path of the door, using the CAD geometric model. These results are in agreement with the experimental

results obtained using fabricated model

Dayananda, GN

Ramaswamy, Setty J

Subba Rao, M

English

Davit arms are usually employed to handle doors of large size autoclaves. These arms require a guiding mechanism to guide the door in a desired path and locate in the desired position. In this work, various options of door handling / steering mechanisms were examined and finally a four bar mechanism is chosen for detailed design. A Geometric model was developed to understand the path traced by the door for\ud
various link angles and lengths. Solid modeling of the door was carried out using Solidworks R and simulation of the path of the door for various angles and lengths of the links of the 4 bar mechanism was also done. The prototype model of the autoclave door was fabricated with a 4 bar mechanism mounted on the davit arm of the door. Number of trials were made by changing link lengths and angles to determine the path of the door, using the CAD geometric model. These results are in agreement with the experimental\ud
results obtained using fabricated model

NAL-IR

1This is a proprietary property of NAL and shall not be copied, reproduced or disclosed to any third party without prior written permission.National Conference on Recent Advances in Design Engineering (RADE 2007)Department of Mechanical &Manufacturing EngineeringManipal Institute of Technology, Manipal – 576104February 22 – 24, 2007; MDS – 02DEVELOPMENT OF A DOOR STEERING   MECHANISMFOR A LARGE AUTOCLAVERamaswamy1, Dayananda2, Subba Rao31Scientist, Advanced Composites Division, ramaswamy@css.nal.res.in2Scientist, Advanced Composites Division, dayanand@css.nal.res.in3 Head, Advanced Composites Division, maddela@css.nal.res.inNational Aero-Space LaboratoriesBangalore- 17ABSTRACTDavit arms are usually employed to handle doors of large size autoclaves. These arms require a guidingmechanism to guide the door in a desired path and locate in the desired position. In this work, variousoptions of door handling / steering mechanisms were examined and finally a four bar mechanism is chosenfor detailed design. A Geometric model was developed to understand the path traced by the door forvarious link angles and lengths. Solid modeling of the door was carried out using Solidworks R andsimulation of the path of the door for various angles and lengths of the links of the 4 bar mechanism wasalso done. The prototype model of the autoclave door was fabricated with a 4 bar mechanism mounted onthe davit arm of the door. Number of trials were made by changing link lengths and angles to determine thepath of the door, using the CAD geometric model. These results are in agreement with the experimentalresults obtained using fabricated model.Key Words: Autoclave, Door steering, Four bar mechanism, Geometric modeling, prototype modelINTRODUCTIONAutoclave moulding techniques are increasingly used in advanced composites manufacturing for aero-spacestructures. As consequence large and larger structural parts are being built, this requires very large autoclaves.Recently Boeing has established the world’s largest autoclave. Its working envelope is 9.2m diameter, 23mlength and a volume of about 2,322m3. This type of autoclaves require special door handling systems [3].The Autoclave shell is a pressure vessel that provides the means to retain pressure inside the workspace. Theautoclave door is usually torispherical in shape. Spherically dished covers are also used to reduce the height ofthe dish. This will reduce the longitudinal and transverse moments during opening and closing of the door,which will have a bearing on the design of door handling mechanism. The Autoclave doors have to be quicklyclosed and locked to reduce the loading time. Accordingly suitable door handling mechanism needs to bedesigned. It is mandatory to design and fabricate the pressure vessels to ASME/BS/IS requirements. One of thecritical design features of large autoclaves,  is the design of reliable and efficient door handling mechanism.a: Door Handling SystemsGenerally full opening equivalent to the shell diameter is provided for the autoclave to load the components forcuring. The doors are employed to close these openings.  The door has to be quickly closed and locked toreduce the door operation time. Since the autoclave is a pressure vessel, the weight of the door increases steeplyas the diameter of the shell increases. Correspondingly, the door handling systems weight also increases. Forlarge autoclaves, the design of the door handling systems is a challenge to the designer. The requirements of theDoor Handling systems of autoclave are as follows It should occupy less space for the door path and for the parking of the door It should not hamper the loading and unloading of the parts in to the autoclave2This is a proprietary property of NAL and shall not be copied, reproduced or disclosed to any third party without prior written permission. The complete door closing and locking operation should be as quick as possible It should have less number of components and be easy to assemble and disassemble It should have the provision to adjust the door alignment with the shell. It is important for largeautoclaves It should not compromise the safety aspects of the pressure vessel and the design should meet thepressure vessel code requirementsDepending on the requirement, size, available space, various methods are being used to handle the doors. Theautoclaves are either vertical or horizontal type. Vertical autoclaves are generally used for curing componentssuch as solar panels of the satellite/ aircraft control surfaces whose one dimension is far less than the other twodimensions.Fig.1 shows types of door handling systems for vertical autoclaves. Fig.1a shows the opening of the door byrope winch, which is generally used for small autoclaves. This occupies more space.  Fig.1b shows the openingof the door by hydraulic means. This occupies less space and handles heavy doors. . Fig. 1c shows the dooroperation by swivel arm with spindle operation. This system lifts the door for upright operation without tiltingit. Fig. 1d shows the door with hinge and balance weight. This reduces the effort required to operate the doorbut takes more space and is heavier for a given size.The horizontal autoclave doors are either hinged type or suspended by Davit arm .The Fig 2a shows the hingeddoor. Manufacture of the hinged mechanism for the door is fairly simple. The hinged door, offers the advantageof easy fabrication and assembly. However, it suffers from the disadvantage that it occupies the precious shopfloor space and hampers the free movement of personnel in the vicinity of the door. Also, for large size shell,the hinged door is uneconomical. The required over hang radius of the hinged door is more than half of thediameter of the door, which is very high when compared with the overhang radius of the davit arm which isgenerally about 1/3 rd of the door diameter.  This substantially reduces the weight of the door handling systemcomponents, particularly for large autoclaves, as the davit arm door components have to resist the less moment.The davit arm mechanism is shown in Fig. 2b. It is slightly more involved in both the design and manufacturingand its notable advantage is that it enables the door to be tucked to the side, thereby making the shop floor spacein front of the autoclave available for the free movement of men and material. It is also economical and elegant,particularly for large size shells. [1]a) Opening by rope winch b) Opening by hydraulic meansc) Swivel arm with spindle d) Hinge with balance weightFig1. Door handling system for Vertical Autoclaves3This is a proprietary property of NAL and shall not be copied, reproduced or disclosed to any third party without prior written permission.a. Hinged Door                                                                 b.  Davit arm type doorFig2. Door handling system for Horizontal AutoclavesNEED FOR THE DOOR STEERING MECHANISMAs was discussed, the davit arms are generally employed for handling large autoclave doors. The davit armprovides the means for supporting the door and it takes the total weight of the door. The davit arm is rotatedto move the door. It requires a guiding mechanism to guide the door in a pre-determined path and locate itin the desired position. The door should open at the beginning, along the longitudinal axis of the shell inorder to avoid the interference with the lock ring of the autoclave shell. The door should not collide withthe shell during its motion.  Generally the door should travel the least distance and occupy less space fordoor movement and should be parked as close as possible to the shell to avoid large radius of davit arm.The conventional guiding system of davit arm is shown in Fig.3a and Fig 3b. In this system, the radius ofthe path of the door has to be changed continuously during movement in order to get the required path. Thedoor is mounted on the carriage to change the radius of the door. The carriage has to handle the weight ofthe door. The guiding mechanism of the carriage consists of a guide, side guide rollers, guide lever etc. Thepath of the guide has to be accurately designed and built.  This complicates the design & fabrication of theentire door handling system apart from increasing the weight of the door handling components. In thissystem, there is no provision to adjust the door path after installation. In case, the required path of the dooris not achieved, the entire guiding system has to be changed. The guiding system has to be designedaccurately for smooth motion of the door without jerks and shocks, as there is no provision for altering thepath after installation.This has motivated us to look for a mechanism which will reduce the number of components (particularlythe carriage) is easy to build and have provision for altering the door path and make minor adjustments bysimple means even after installation of the door.Fig3a. The Davit arm with conventional guiding mechanism4This is a proprietary property of NAL and shall not be copied, reproduced or disclosed to any third party without prior written permission.Fig3b. The Davit arm with conventional guiding mechanismDOOR-STEERING MECHANISMThe various options of the door handling/steering mechanisms were examined and finally a four barmechanism was chosen for detailed design.a: Four bar linkage designIn engineering practice, most of the problems of four-bar linkage design fall into two classes.(i) Co-ordination of input and output angles.Double lever, crank lever and double crank mechanisms are used to coordinate input and output crankangles. In other words, when the input link sweeps through a specified angle, the out put link must passthrough another specified angle.(ii) Co-ordination of input and output linear displacement.Slider crank mechanism is used to coordinate angles with linear displacements. In other words, when theinput crank sweeps through a specified angle, the output slider must pass through a specified position on astraight line, & vice versa.b:  Design ApproachThere are two approaches to the design problems of four bar linkages; the analytical and the graphical(geometric). The geometric approach is generally preferred by the designers because of its simplicity,clarity, accuracy and ease of application for engineering purposes. Designers can also visualize how thelinkage would move and how it would fit the available space [2].Initially Ackermann steering mechanism of an automobile was considered. In this mechanism, the angles ofrotation of the two links are limited and cannot be rotated.  Hence this mechanism could not be considered.Since the davit arm needs to be revolved by about 180, to park the door side ways, we have to look for amechanism, whose links (at least two) can make a complete rotation. There should not be dead centreposition during a complete cycle of operation. The double crank mechanism, which meets the aboverequirement, was chosen. Fig 4 shows the line diagram of double crank mechanism.  While designing thefour bar linkage, the transmission angle of the linkage also has to considered. The transmission angle (μ) isof the same importance in the linkage design as the pressure angle is in cam design. The transmission angleis the angle between the coupling rod and output link. Generally the force transmission from the couplingrod to the output crank is effective for higher transmission angles. In this problem, we have chosen thegeometrical approach to analyze the mechanism.5This is a proprietary property of NAL and shall not be copied, reproduced or disclosed to any third party without prior written permission.Fig4. Line Diagram of Double Crank MechanismIMPLEMENTATION OF FOUR BAR MECHANISM TO THE DAVIT ARMThe davit arm, which is rotated for door movement, was chosen as input crank. For the mechanism towork, it should have at least one fixed link. The link between davit mast & second crank is chosen as fixedlink.The output crank is designed as adjustable link, whose link length is adjustable.   The coupler link isconnected between the door and the output link.  To adjust the link angles,  key less hubs are used.  Fig. 5shows the arrangement of the four bar steering mechanism on the davit arm.Fig5. The arrangement of steering mechanism on the davit armGEOMETRIC MODELINGTo analyze the co-ordination of input &output angles of the linkages of the four bar mechanism and topredict the path traced by the door, a concept was chosen and a geometric model was developed using AutoCad for that concept.Fig 6 indicates the geometric model of the mechanism indicating various positions of door for a given linklength &link angle. This geometric model has enabled us to try various door paths for various permutations& combinations of link lengths and link angles and finally arrive at an optimized link length and angle.Solid model of the door arrangement and simulation of the path of the door was carried out usingSolidworksR software for a given configuration.  This simulation of the door has enabled us to understandthe path of the door for a given geometry and to arrive at the optimized door movement and davit armradius that will take least space & least radius. The door movement/path obtained by geometrical modeland path obtained in solid model were in agreement6This is a proprietary property of NAL and shall not be copied, reproduced or disclosed to any third party without prior written permission.Fig6. Geometric model of the mechanism with various door positionsFABRICATION OF PROTOTYPE MODELA prototype autoclave model (Diameter of the shell is about 500mm) with davit arm door & door steeringmechanism mounted on the door was fabricated.  Fig 7 shows the photograph of the fabricated model.  Fig.8 shows the line diagram of four-bar mechanism with the link dimensions and angles.  The configuration ofthe linkage was arrived after several trials made using the geometric model and simulation in Solidworks.The measured angle between davit arm & coupling link of the model was compared with the geometricalmodel readings. Table 1 shows these values.  These values are in agreement with the experimental values.Fig7. Prototype model with steering mechanism mounted on the davit arm7This is a proprietary property of NAL and shall not be copied, reproduced or disclosed to any third party without prior written permission.Fig8.   Line diagram of a steering mechanism used for prototypeTable 1.  Table showing the readings obtained from geometric model and prototype modelInput linkRotation(Davit armrotation)Angle between input link & coupling linkGeometricmodelReadingsPrototype Modelreadings0 140 140 10 129 13020 119 11930 109 10840 99 9950 89 8960 79 7970 69 6980 59 5990 50 49100 40 40110 32 32120 22 24130 18 18140 16 16150 17 17160 22 20170 26 24180 31 29185 34 338This is a proprietary property of NAL and shall not be copied, reproduced or disclosed to any third party without prior written permission.CONCLUSION:The door steering mechanism using for four-bar mechanism was successfully developed.  Geometricmodel was developed to understand the path traced by the door for various configuration of the mechanism.The geometric model enabled us to optimize the davit arm radius and the door path.  The prototype modelwas fabricated to validate the results obtained by geometric model. The results of geometric model &fabricated model were compared and found in agreement.  This successful development of door steeringmechanism has motivated us to implement it in the 5meter diameter autoclave (that is being built by NAL)in place of conventional mechanism.ACKNOWLEDGEMENTSThe Authors wish to gratefully acknowledge the contributions of the following persons.  Dr. A.R. Upadhya,Director for the encouragement, Mr. G.M. Kamalakannan for providing necessary electrical support, Mr. B.Partiban, Mr. K. Prakash, Mr. B.K. Bhaskar for fabricating the prototype model, Mr. V. Harish, Mr. L.Murugan, Mr.K Arun kumar, Mr. J.Christopher Daniel for providing CAD support.REFERENCES1. Dayananda .G.N, Subba Rao.M and Somashekar B.R, 1994, Indigenous Development of Auto-Clave Technology, proceedings of National symposium on development in Advanced Composites& Structures.2. D.C. Tao, 1967, Fundamentals of applied kinematics, Addison-Wesley publishing company,Massachusetts3. High performance composites Magazine, Sep ‘2006 Edition.4. Jeremy Hirsch horn, 1976, Kinematics and dynamics of plane mechanism, McGraw-Hill BookCompany, New York.6. Todol Taricco, Auto clave cure system, ASM hand book of composites,Vol.1, 645- 648.

Development of a Door Steering Mechanism for a Large Autoclave

National Aerospace Laboratories Institutional Repository

http://nal-ir.nal.res.in/9197/1/RADE_final_paper_doc.pdf

Development of a Door Steering Mechanism for a Large Autoclave

Abstract

Similar works

Full text

Available Versions

NAL-IR

National Aerospace Laboratories Institutional Repository