It was ascenained that, sound intensity measurement based on fixed point scanning technique could be used to measure the normal incidence sound absorption (aN) of perforated panels accurately and reliably in this paper, the importance of sound field quality indicator (F1+ F2+ F3+ F4) and sound intensity probe measurements distance toward measured aN reliability will be discussed. Individual statistical regression models that suit the measured aN for 20% and 30% perforation ratio were obtained. in addition, overall model for 20% and 30% perforation ratio were also obtained and can served as a basis for aN prediction of perforated panels with the same perforation ratio. The findings suggest, circular perforated panels. which are the simplest form of direct piercing carved wood panels ( DPCWP ) are able to act as sound absorber

Abd. Rahman, Tharek

Dimon, Mohamad Ngasri

Ibrahim, Md. Najib

Jaafar, Md. Yunos

Said, Ahmad Khan

English

Universiti Teknologi Malaysia Institutional Repository

Normal Incidence Sound Absorptionwleasurement of Circular Perforated Panels UsingSound Intensity TechniqueByMohamad Ngasri Dimon. Tharek Abd. Rahman, Ahmad Khan SaidElectrical Engineering Faculty, UTM, 81310,Skudai. lohor. Email:ngasri@suria.fke.utm.myMd. Najib Ibrahim,Department of Architecture, Faculty of Built Environment,UTM 813 10, Skudai, lohorMd. Yunos laafar,Center For Economic Research and Technology Management,MARDI, P.D.Box 12301, 50774, Kuala Lumpur.Abstract[t was ascenained that, sound intensitymeasurement based on fixed point scanningtechnique could be used to measure the nonnalincidence sound absorption (aN) of perforatedpanels accurately and reliably rn this paper, theimportance of sound field quality indicator (FloFh Flo F.) and sound intensity probemeasurements distance toward measured CtNreliability will be discussed. Individual statisticalregression models that suit the measured aN for20% and 30% perforation ratio were obtained.[0 addition, overaH model for 20% and 30%perforation ratio were also obtained and canserved as a basis for aN prediction of perforatedpanels with the same perforation ratio. Thefindings suggest, circular perforated panels.which are the simplest form of direct piercingcarved wood panels ( DPCWP ) are able to act assound absorber.E·\1.0 IntroductioDNormal incidence sound absorption (CtN)measurement of an acoustics materials usingsound intensity technique was ascenained to beable to results in accurate and reliable CtN [I ][2].This technique allow5 it to be used to measureCtN of circular perforated panels. which is thesimplest form of DPCWP. Knowing and able topredict the aN performance of DPCWP normallyused as parr of an enclosed room wall partitionhelp toward achieving intended acoustics qualityparticularly its Reverberation Time (RT60).Earlier, the consideration of using DPCWP asparr of wall partition is believed mainly onaesthetics consideration besides helping innatural ventilation to occur. Therefore, it istimely and appropriate. to enhance theapplicability of the DPCWP beside itsconventional applications.2.0 Direct Piercing Carved Wood Panels(DPCWP)Direct piercing carved wood panels ( DPCWP )have been used as part of wall partitions for anenclosed room particularly in a mosque. Thishelps in providing natural ventilation as air canpass through the panel easily. At the same time,it is believed that the DPCWP are able to act assound absorber. DPCWP are available in variousperforation ratio, patterns and elements. Thecircular perforated panels are the simplest formsof DPCWP available.Documented evidence suggest that, as early as1793, the DPCWP have been used as part of awall partition for a mosque as in Masjid Abidin,Kuala Terengganu, Trengganu [3]. The Mosquewas build by Sultan Zainal Abidin II where.initially the mosque was build from wood.Subsequently it undergoes renovations [0 what itis nowadays.The right wall partitions consist of 7 door panelswith 4 doors leaves on each door panels (2 doorleaves on each side). For each door panel. up tothe height of 1m from the floor, there is a solidwood partitions. where after that height, thefloral elements of DPCWP were used as part ofthe wall partitions. On the above of each doorunit. there is a Calligraphy element of DPCWPthat constitute part of the wall panel. The door isof flexible lyre. which can be. squeeze. open andclosed easily. It is also observed that, the backwall partition consist of 4 door leaves. whereasanother 2 door panels is of 8 door leaves with thesame configuration as in the right side doorpanels. It is believed that, the used of DPCWPin this mosque is to help in achieving properacoustic quality. This is taking into accountsound energy can pass through the panels easilywithout reflecting back to the source Excessivesound reflections can cause speech signalinterference and hence degrading speechintelligibility inside.surface. The sound pressure amplitude shall beminimum at A/4, 3A/4 etc from the materialsurface Probe positioning such as at A/4 fromthe material surface shall results in easy soundfield as indicated by its low Lpi value.It is pertinent that, in actual sound intensitymeasurements, the thickness of the materialshould be taken into consideration [0 determinethe actual probe measurement distance.Table I : measurement distance for a 20mmmaterial thicknessF(Hz) 250 ! 500 lK 2K 4KA/4(mm) I 340 170 85 43 i 22Material 20 20 20 20 20thickness(rom)mea.dist 320 150 65 23 2(rom)0.751.. 127 64(rom)Mea.dist 107 44(mm)1.251.. 107(mm)Mea.dist 320 150 65 107 87(mm)Table I shows the measurement distance from250Hz to 4 kHz. The probe positions were at0.751.. and 1.25 A. respectively where anotherminimum. sound pressure amplitude shall occur.These positions are predicted to result in easysound field at its respected octave centerfrequency to results in reliable sound intensitymeasured.4.0 Sound Quality Indicaton4.1 Surface Pressure Intensity Indicator (Fz)3.0 Probe Measurement DistanceWhereProbe measurement distance from the materialsurface used in the measurement of soundintensity to calculate the measured a.N is one ofthe factors that can contribute to the reliability ofthe sound intensity measured. It is consideringwhenever normal incidence sound field impingeson the acoustic material, the standing wave shallbe created :n front of the reflecting materialE-2Fz=4. = pressure intensity index (dB)4 = sound pressure level (dB)ILII =Sound intensity level (dB).$,2 Negative Partial Power Indicator -F3Lp =sound pressure Level (dB)LI = sound intensity Level (dB)Calculation of FJ takes into account themagnitude of L\. Any existence of -ve L, (-vesound intensity) indicates the measurement isconducted in the near field region due to thesound rield circulation effect. Sound intensitymeasurement in this region will results inunreliable measured sound intensity as the netintensity measured shall be uniform (-ve or +veintensity, depending on the prObe orientation).The calculation of F2 = Lp I does not taken intoconsideration the direction of L,. Low Lpl valueis an indication of easy sound field beingmeasured. This translates into minimal phasemismatch error [4]. High £""1 value indicatesdifficult sound field is being measured wherethere is ;reater inHuence of phase mismatcherror in the measurement. This will severelyaffect the accuracy of the sound intensitymeasured. Good sound absorption materials willresults in Jow Lpl, whereas poor soundabsorption material results in high. Lp I.The circular perforated panel of differentconfigurations with 20% and 30% perforationratio were fabricated. The perforated paneldimension is 1.2 m • 1.2m with 20 mm thicknessof Punah species and securely mounted into themounting frame. The details of the perforatedpanels are as in Table 2.5.0 Experimental set-up4.4 Non-Stationarity - Ft.Table 2: circular perforated panel configurationswith 20% and 30% perforation ratio.Fi is an indication of the variation on the soundsource measured. This variation can influencethe reliability of the sound intensity measured.Stable sound source is required. where FI <0.6dB will results in reliable sound intensitymeasurements. It is appropriate, before anysound intensity measurements are to beconducted, examining the value of FI checks thevariability of the sound source.Sample r(mm) d(mm) , %K~~r~t~~~D;D:;:p~f=--'-'-:-'16::-'-'--'---"-6-:-:0:--'- 20._--...._.. _..._-54 20 i5 10-~=---I--K::-:---~-----_ ..... -58~__--=4-=-4_KD--~1:-::RM-- .. 29 .__52 20 60 30SIO 54 150 30(2)\VhereF3 = Lp - Ll4.3 Field Non-Uniformity Indicator - F4.This sound quality indicator, F~ is an indicationof the non-uniformity of the sound intensitymeasured over its measurement positions. Smallc~ value indicates the sound intensitymeasurement positions are considerably even.This translates into reliable sound intensitymeasurement. High. F4 value indicatesconsiderably uneven sound intensity wasmeasured over its measurement position whichresults in unreliable measurements. Therefore,F4 value shall also be check in any soundintensity measurement. This particularly toexamine the non-uniformity severity of thesound intensity measured.The sound intensity measuring system usedconsist of B & K Real Time Analyzer type 2l44,sound intensity probe type 4181. sOUlld intensitycalibrator type 3541, sound power program type5304 and B & K sound source type 4224.The sound power program type 5304 allowssound intensity measurement based on discreetpoint measurement complying with [SO 9614-I [5]. The measurements were conducted insidethe Anechoic Chamber, available at theAcoustics Laboratory, Electrical EngineeringFaculty, UTM. The Anechoic Chamberdimension is 3.42 m • 3.42 m '" 2.17 m. Thesound source was located about 2 m from themateria! surface and radiating toward the centerof the material surface under study.E-36.0 Result DiscussionTable 3: aN for circular perforated panel with20% perforation ratioTable 4 : aN for circular perforated panel with30% perforation ratio.Table 3 & ~ show the aN measured for thevarious configuration of the perforated panelfabricated.st~tis~ical test [6][7][8]. There are convergencecn~enaK asymptotic standard error for theestunated parameter, asymptotic 95% upper andlower confidence interval, asymptotic correlationmatrix,. residual plot. the value of Skewness andKurtOSIS, steam and leaf distribution. andnormal probability plot.For the polynomial regression model. the timessof the. model toward the measured aN isdetermmed by examining the statisticalparamete~ whic~ include model significantlevel, vanable SignIficant level. residual plot,Skewness and Kurtosis value, steam and leafdistribution , normal probability plot and its C(p) value. It was found out as tabulated in Table5, generally the exponential model is better fit tothe individual ~ta except for the prototype 58where polynomIal model better fit to the data.Table 5 : Individual statistical regression modelfor 20% andJO% perforation ratio.4K0.3\0.3L0.53IK lKSample! 250 500.. J:ili---'z)'-----._SILO 0.82 0.67 0.33--54---'-6'.97 0.83 0.60' 0.30._-'---'-__K_RKi_~~ 0.80 0.60 0.26Samplel 250 500 IK 2K 4K__.f(Hz)~I 0.97 0.96 0.83 M~_MKRP ,~-SlO 0.94 0.87 0.79 0.36 0.58'S10 30 S=O.934*e-l c;ooZ 1'FrqSample %Perforation Regression ModelFurther statistical regression model wasinvestigated to obtained the overall re£ressionmodel that better fit to all measurements- data at20% and 30% perforation ratio. Exponential andpolynomial model were examined and the better-fit regression models are as in Table 5.Table 6 : Overall model for 20% & 30%perforation ratio.S8 20 5=1.l1·O.00068*Frq._;:;:;-_+--_-::-:-__----:--{F:K::KKl~l~l~lll13 *(FrqiS2 30 S=LOI6*eOQooo22'f"<'q__S;::-;-I_-;---_-=2.::-0__KKKK-KK;:Kp~=~fK:K:KMDK:DKR~*e-'C004S'F"lS4 20 p=f·MPR*e:;v~Overall, the measured aN exhibits decay trendform low frequency to high Frequency. The aNmeasured is generally higher at low frequencyand decreasing as the frequency of measurement~D1creasesK Furthermore, the aN is higher over itsmeasurement frequency for 30% perforationratio compare to 20 % perforation ratio.Further, it is observed that, for sample 58 andSI0 where the aperture radius is significantlylarger than aperture radius of SI, S4 and 52,there appear an aN dip at 2KHz which is 0.26and 0.36 respectively for 20% and 30%perforation ration. However, at 4KHz, there isan increment in aN measured which is 0.53 and0.58 respectively in comparison to the aNmeasured at the same frequency as in sample S I,S4 and S2.6.2 Statistical Regression ModelPerforationratioOverall modelBased on Table 6. sound absorption performancefor circular perforated panel with 20%perforation ratio can be model using quadraticpolynomial model. At 30% perforation ratio, theexponential model is the most suitable model, tomodel its sound absorption performance.Exponential and polynomial statistical regressionmodels were explored using Statistical AnalysisSystem (SAS) package to find out whichregression model will better fit to the measuredsound absorption performance [6]. In addition,overall statistical regression model for 20% and30% perforation ratio were also investigatedwhere the influence of independent variablessuch as frequency and perforation ratio towardsound absorption performance can be modeled.The fimess of the exponential model toward themeasured aN is examined through various20%30%: Y=1.l2·! 00062Frg+o.00000011(frqiE·47.0 ConclusionsTo results in credible aN measurements forperforated panels, it is crucial that probemeasurement distance is position where thepredicted sound pressure level is minimum atthat measurement distance. The value of soundquality indicators of the measured soundintensity should be examined to ascertain thereliability of the measured sound intensity.Individual and group statistical regressionmodels have been developed for circularperforated panel witb 20% and 30% perforationratio. This model serve as a basis to predict theaN perfonnance of perforated panels with thesame perforation ratio. Results show that,circular perforated panel can act as soundabsoll'tion material as predicted. The use ofperforated panels as part of a wall partitions ofan enclosed room will be able to help improvingits acoustics quality particularly its RT60 besideits conventional applications.8.0 RefereacesMohamad Ngasri Dimon et ai, "NormalIncidence Sound Absoll'tion CoefficientMeasurement Using Sound IntensityTechnique: An Accuracylnvestigation"Presented at as a 30 iJI meeting.Columbus Ohio, Nov. 1-5, 1999.2. Mohamad Ngasri Dimon et all "NonnalIncidence Sound Absoll'tion Measurementof an Acoustics Materials Using SoundIntensity Technique: Reliability Factors"Presented at EEC organized by UM, August2000.3. Che Mobd Azmi Ngah. .. Masjid Abidin,Kuala Terengganu", Berita Darul Iman,Julail Ogos 1991.4. Jacobsen. F. (1997), .. Sound Intensity andIts Measurement", SdI International Congresson Sound and Vibration", University ofAdelaide, South Australia. Dec 15-18, pg2231-2246.5. ISO 9614-1 (1993), .. Detennination ofSound Power Levels of Noise Sources usingSound Intensity-Part I: Measurements atDiscrete Points", ISO. Geneva. Switzerland.E·S6. Mohamad Yunus Jaafar, "Pensuaian ModelTaklinear Gompertt TerhadapPertumbesaran Pokok Koko" Matematika1999, Iilid 15. bi!. I halaman '·20.7. D.M. Bates and D.V. Wans, ., NonlinearRegression Analysis and Its Application".John Wiley. New York, 1988.8. S. Weisberg. " Applied Linear Regression".Second Edition, John Wiley, New York,1985.

Normal incidence sound absorption measurement of circular perforated panels using sound intensity technique

http://eprints.utm.my/10972/1/MohamadNgasriDimon2000_NormalincidenceSoundAbsorptionMeasurement.pdf

Normal incidence sound absorption measurement of circular perforated panels using sound intensity technique

Abstract

Similar works

Full text

Available Versions

Universiti Teknologi Malaysia Institutional Repository