IDRONAUT

Electronic Publication Information Center

I - 20047 Brugherio  (MI)  ITALYVia Monte Amiata, 10Tel: +39 039 883832  Fax +39 039 883382e-mail:   idronaut@idronaut.ithttp://www.idronaut.itNOTE: Dimensions are in millimeters.TECHNICAL SPECIFICATIONS            Sheet 1/1Issue: May 1983 Revision:May 1995Conductivity   measurement  is accomplished  by using an advanced  platinum seven-ring  quartz cell.  The  advantage  of  this  design is that there  are  no  platinum   blacksurfaces  which can be  contaminated or  can deteriorate  during  profiling  or  monitoring;it  is easy to be cleaned  in  the  field.Technical  specifications:Cell dimensions: inner diameter 8 mm, length 45 mm.Cell type: seven platinum rings deposited inside a quartz tube.Range: 0 .. 130 mS.Response time: 60 ms *Operating pressure: 600 bar.Maximum pressure: 700 bar.Output connections: 6 x 0.4 mm insulated copper wires (two rings use the same wire).Mounting: through 12 mm hole with two 0-ring seals (Parker 2-12).Weight: 65 gr.Body: black plastic and titanium body.Filling  for  pressurecompensation: silicone oil* at 1 m/second  flowFLOW CONDUCTIVITY SENSOR(700 bar)

Conductivity measurement is accomplished by using an advanced platinum sevenring quartz cell

Abstract

Similar works

Full text

Available Versions

Electronic Publication Information Center