Akbulut, Ozge

Akbulut, Özge

Bilgin, Nalan

Erman, Burak

Goren, Kerem Behic

Gören, Kerem Behiç

Menceloglu, Yusuf Z.

Menceloğlu, Yusuf Z.

Taskent, Humeyra

Taşkent, Hümeyra

Sabanci University Research Database

PREPARATION OF POLYMERIC NANOCAPSULES WITH PERFLUOROALKYL WHISKERS IN SUPERCRITICAL CARBON DIOXIDE  Nalan Bilgin1, Ozge Akbulut1, Humeyra Taskent 2, Kerem Goren 2, Burak Erman3 and Yusuf Z.  Menceloglu1   1Materials Science and Engineering, Sabanci University, Orhanli 34956 Istanbul, Turkey; 2Department of Chemistry, Koc University, Sariyer 80910 Istanbul, Turkey; 3Department of Chemical and Biological Engineering, Koc University, Sariyer 80910 Istanbul, Turkey  Introduction Being an inexpensive, non-toxic, non-flammable1 and environmentally friendlier2 alternative to other organic solvents, CO2 became increasingly attractive especially for synthetic procedures of polymers. Moreover, scCO2 has unique properties3 and formation of ordered polymer microstructures may be achieved by free radical heterogeneous polymerizations with the utilization of specific CO2-soluble stabilizers.4 Particularly, regular microsphere structured cross-linked polymers (microgels) are practical for wide range of applications of numerous fields including drug delivery5, catalysis6, pollution control7, and sensors.8 In this work we present a new method for the synthesis of core-shell microgels by a single step reaction procedure. The proposed method involves the polymerization and cross-linking of styrene monomer by heterogeneous free radical mechanism in scCO2. Stabilization of the reactants is achieved by utilization of initially synthesized reactive surfactant (RS) and a surfactant-like azo polymerization initiator (SLAPI), both containing fluorinated tails compatible with CO2. The obtained structures consist of a cross-linked polystyrene shell covered with hydrophobic, fluorinated chains (perfluoroalkyl whiskers) on the upper surface and polyethylene glycol (PEG-1500) based hydrophilic chains within the shell. The nanocapsules fall in the size range 200 – 300 nm and show regular distribution. The different chemical functionalities form the basic potential for applications based on chemical and physical phenomena occurring between diverse response giving systems.    Experimental Materials. Hexane and tetrahydrofuran (THF) were dried over CaCl2. All other reagents were used without further purification. Polyethylene glycol  (PEG-1500) was purchased from Merck and dried by vacuum for 24h before use. Maleic anhydride (95%) obtained from J.T. Backer was recrystallized from toluene. 2-(Perfluorohexyl) ethanol (EA600) was kindly received from Clariant and divinylbenzene was obtained from Fluka. Styrene monomer was passed through neutral alumina column, then purged with N2 and stored in refrigerator till use. All water used throughout the experiments was deionized initially.    Instrumentation. Characterizations of RS and SLAPI were performed by Fourier transform infrared spectroscopy (FT-IR) recorded on Equinox 55/S Fourier transform (Bruker). Polymerizations held in scCO2 were performed by P-50 High Pressure Pump Contrivance (Thar) in a 100mL high-pressure stainless-steel vessel. Heating was achieved with a heating band and temperature was controlled by a thermocouple adapted to the vessel. Thermo gravimetric analysis (TG) was used to determine salt content incorporated into microgels swollen in salt solutions with STA 449C Jupiter (Netzsch). Scanning electron microscope analyses were performed with Supra 35VP Field Emission SEM (Leo) to photograph the nanocapsules. Samples were gold coated with K950X Turbo Evaporator (Emitech) before SEM analyses. Contact angle measurements were performed with DSA10 Drop Shape Analysis System (Kruss) in order to account for fluorinated chain presence on the surfaces of materials.  Synthesis of Surfactant-Like Azo Polymerization Initiator (SLAPI). EA600 (28.4 x 10-3 mol, 10.34g) was dissolved in 80mL 1,1,2-trichlorotrifluoroethane (Freon-113) in a 2-neck round-bottom flask equipped with a magnetic stirring bar. A separate solution of 4,4-Azobis (4-cyanovaleryl chloride) (ABCVCl) (28.4 x 10-3 mol, 6g) synthesized previously9 and 150mL THF was prepared and added drop wise to the first solution. The flask was sealed with rubber septa and was purged with N2.  The reaction proceeded in dark, at room temperature (25 °C) for 12h under N2 atmosphere. 5g (7.76 x 10-3 mol) of the isolated intermediate product (SLAPI-1) and PEG-1500 (7.76 x 10-3 mol, 11.64g) were dissolved in 150mL SOCl2 in a 3-neck round-bottom flask equipped with a condenser, thermometer and a stirring bar, and were refluxed at 80 °C for 1h. The final product (SLAPI) was precipitated in 150mL cold hexane. SLAPI-1 and SLAPI were characterized by FT-IR spectroscopy. SLAPI was tested for scCO2-solubility and stored under vacuum in dark. Synthesis of Reactive Surfactant (RS). Maleic anhydride (5.10 x 10-2 mol, 5g) and EA600 (5.10 x 10-2 mol, 18.57g) were dissolved in 150mL toluene in a 3-neck round-bottom flask and 2 drops of sulphuric acid was added as catalyst. The flask was equipped with a condenser, thermometer and a stirring bar and reactants were refluxed at 95 °C for 1.5h. 5g (1.08 x 10-2 mol) of the intermediate product (RS-1) and PEG-1500 (1.08 x 10-2 mol, 16.23g) were reacted in 500mL toluene by azeotropic distillation set-up. RS-1 and RS were characterized by FT-IR spectroscopy. RS was tested for scCO2-solubility and stored under vacuum in dark as SLAPI. Preparation of Polymer Nanocapsules. 9g of styrene monomer (80% of total weigh of monomer, initiator, surfactant, and water), 0.6g RS (~5%), 0.3g SLAPI (~3%), 1g water  (~9%), and 3 drops of THF added as a co-solvent were mixed and stirred regularly in a beaker for 10min. The mixture was transferred to the high-pressure reactor vessel. 0.35g of divinyl benzene (~0.6%) was added as a cross-linker, the vessel was closed, and CO2 was slowly pumped within. The pressure was gradually increased to 250bar while the temperature was increased to 75 °C. The formation of fine dispersions in a milky suspension form was observed. The reaction was run for 24h. The polymer was isolated as a clean powdery product. Swelling tests with various solvents and water-salt solutions were performed. Materials were characterized with SEM, TGA and contact angle measurements.  Results and Discussion Surfactant-Like Azo Polymerization Initiator (SLAPI). The synthesis of SLAPI described in Figure 1, consisted of two-steps of reactions of ABCVCl with EA600, and SLAPI-1 with PEG-1500, respectively. Functional groups described on the FT-IR spectra of ABCVCl, SLAPI-1, and SLAPI present in Figure 2, clearly show the conversions to products. SLAPI is completely CO2-soluble at mild conditions (150bar, 40 °C).   ClCH3NCN NCH3CNClO OTHF/F-113F3C (CF2)5 (CH2)2+OHEA600ABCVClRFOCH3NCN NCH3CNClO ORF OH( )SLAPI-1+CH2CH2 O CH3HOPEG-1500RFOCH3NCN NCH3CNOO OSLAPICH2CH2 OSOCl234CH334 Figure 1. Synthesis of surfactant-like azo polymerization initiator (SLAPI).   Figure 2. Stacked FT-IR spectra of ABCVCl, SLAPI-1, and SLAPI.  Reactive Surfactant (RS). The two-step synthetic procedure for RS is described in Figure 3. Similarly, Figure 4 presents the detected functional groups in the FT-IR spectra of reactants and products, throughout the reactions. Conversions to RS-1 and RS can be clearly observed. RS is completely CO2-soluble even at milder conditions (100bar, 30 °C).   TolueneF3C (CF2)5 (CH2)2+OHEA600 RFO CHORF OH( )RS-1+CH2CH2 O CH3HOTolueneCHOHO2 drops of H2SO4RFO CHOCHOOCH2CH2 O34CH334OOO+H2ORS Figure 3. Synthesis of reactive surfactant (RS).   Figure 4. Stacked FT-IR spectra of maleic anhydride, RS-1, and RS.  Polymer Nanocapsules. Experiments conducted with various organic solvents such as THF, chloroform, dimethyl sulfoxide, isopropyl alcohol, and acetone showed swelling of material, which verified cross-linking. Water transfer to the core containing hydrophilic chains, was performed by initially swelling the particles in THF and then including the water. Further swelling was observed and characterizations are continuing. Tests in water with material not swollen initially in THF were also performed. Material did not wet, which is the evidence of fluorination on the surface that reduces the polymer surface energy and material affinity to interact with the water phase.10 The contact angle of cast film obtained from THF dispersion was measured to be 145 °, which is another evidence for the fluorinated nature of the surface. Figure 5 shows the general appearance and the cross-section of the nanocapsule structure by illustrations present in a. and b. on the left, and a photograph obtained from the contact angle measurement for the THF dispersion is present on the right of the image. The surface is covered with CO2–philic, hydrophobic fluorinated chains, the shell consists of cross-linked styrene, and the hydrophilic chains form the inner core of the capsule.   Figure 5. Proposed structures for the synthesized polymer nanocapsules at a. and cross-section at b.  present on the left; and contact angle image obtained from the from THF dispersion present on the right.  Aqueous salt solution addition to the THF dispersions resulted even in higher degree of swelling. Samples were taken from swollen material, then were incorporated on glass thin plates and dried to remove solvent away. Electron micrographs of cast films from THF, THF + water, THF + water + salt dispersions were obtained. Most informative images were obtained from the THF + water + salt dispersion because of the highest degree of swelling of particles. Images taken from non-swollen polymer did not show the regular microstructure formation. Figure 6 displays photographs of materials deposited on glass slide from THF + water + salt dispersion. The fine ordered smaller structures are in the size range 200 – 300 nm. Collapse of particles in some photographs may present evidence for the hollow nature of the core.   Figure 6. Electron micrographs of polymer nanocapsules from THF + water + salt dispersion.  TG analyses of samples taken from THF + water + salt dispersions with different salt concentration, were run in order to detect residual salt in the swollen sample by comparing the thermal behavior of the samples. Two samples were prepared, one from particles swollen for three days  (A) and other from particles swollen for one week  (B). The samples taken from the dispersion were finely washed with water and dried. Sample B showed final residual mass about 10% attributed to salt content, while sample A showed almost no residual mass. The results account for the time dependency of salt incorporation. Figure 7 displays typical TG curves for sample A and sample B. Work is continuing to generate reasonable data and relations between thermal behaviors and varying salt concentration incorporated into the polymer particles.      Figure 7. TG analysis for polymer samples A and B, swollen in salt, water, THF mixture.   Conclusions We implemented a new method for the synthesis of core-shell microgels. The design of hydrophobic surface and a core of hydrophilic nature achieve selective permeability of particles. The obtained regular structured polymeric particles with diverse surface and core properties can find wide range of useful applications. Utilization of environmentally friendlier scCO2 as a reaction medium constitutes another important dimension of this work.  Acknowledgements. The authors would like to thank Clariant for kindly providing EA600 and Sabanci University funding is gratefully acknowledged for financial support.  References (1)    McHugh, M.A.; Krukonis, V.J. Supercritical Fluid Extraction, 2nd             edition, Butterworth-Heinemann, Stoneham, MA, 1994 (2)    Kirmizialtin, S.; Menceloglu, Y.Z.; Baysal, C. J. Chem. Phys. 2003, 119,          9, 4953. (3)    Cooper, A.I.; Hems, W.P.; Holmes, A.B. Macromol. Rapid           Commun.1998, 19, 353   (4)    DeSimone, J.M.; Maury, E.E.; Menceloglu, Y.Z.; McClain, J.B.;            Romack, T.J.; Combes, J.R. Science 1994, 265, 356. (5)    Hoffman, A.S. Adv. Drug Deliv. 2002, 54, 3.  (6)    Bergbreiter, D.E.; Case, B.L.; Liu, Y.S.; Caraway, J.W. Macromolecules           1998, 31, 6053.  (7)    Morris, G.E.; Vincent, B.; Snowden, M.J. J. Colloid Interface Sci. 1997,          190, 198. (8)    Pelton, R. Adv. Colloid Interface Sci. 2000, 85, 1.  (9)    Bilgin, N. Synthesis of Fluorinated Segment Containing Oligomers for          Supercritical Carbon Dioxide Applications, Master Thesis, Sabanci          University, 2003.  (10)  Beamson, G.; Alexander, M.R. Surf. Interface Anal. 2004, 36, 323.   

Preparation of polymeric nanocapsules with perfluoroalkyl whiskers in supercritical carbon dioxide

http://research.sabanciuniv.edu/1596/1/228_ACS_Nalan.pdf

Preparation of polymeric nanocapsules with perfluoroalkyl whiskers in supercritical carbon dioxide

Abstract

Similar works

Full text

Available Versions

Sabanci University Research Database