Preparation and Characterization of Aloe Vera Blended Collagen-Chitosan Composite Scaffold for Tissue Engineering Applications

Abstract

Collagen–Chitosan (COL-CS) scaffolds supplemented with different concentrations (0.1–0.5%) of aloe vera (AV) were prepared and tested in vitro for their possible application in tissue engineering. After studying the microstructure and mechanical properties of all the composite preparations, a 0.2% AV blended COL-CS scaffold was chosen for further studies. Scaffolds were examined by Fourier transform infrared spectroscopy (FT-IR), differential scanning calorimetry (DSC), and thermogravimetry analysis (TGA) to understand the intermolecular interactions and their influence on the thermal property of the complex composite. Swelling property in phosphate buffered saline (pH 7.4) and in vitro biodegradability by collagenase digestion method were monitored to assess the stability of the scaffold in a physiological medium in a hydrated condition, and to assay its resistance against enzymatic forces. The scanning electron microscope (SEM) image of the scaffold samples showed porous architecture with gradual change in their morphology and reduced tensile properties with increasing aloe vera concentration. The FTIR spectrum revealed the overlap of the AV absorption peak with the absorption peak of COL-CS. The inclusion of AV to COL-CS increased the thermal stability as well as hydrophilicity of the scaffolds. Cell culture studies on the scaffold showed enhanced growth and proliferation of fibroblasts (3T3L1) without exhibiting any toxicity. Also, normal cell morphology and proliferation were observed by fluorescence microscopy and SEM. The rate of cell growth in the presence/absence of aloe vera in the scaffolds was in the order: COL-CS-AV > COL-CS > TCP (tissue culture polystyrene plate). These results suggested that the aloe vera gel-blended COL-CS scaffolds could be a promising candidate for tissue engineering applications