<p>In many manufacturing processes, process data are observed in the form of time-based profiles, which may contain rich information for process monitoring and fault diagnosis. Most approaches currently available in profile monitoring focus on single-stage processes or multistage processes with repeating cyclic profiles. However, a number of manufacturing operations are performed in multiple stages, where non-repeating profiles are generated. For example, in a broaching process, non-repeating cyclic force profiles are generated by the interaction between each cutting tooth and the workpiece. This article presents a process monitoring method based on Partial Least Squares (PLS) regression models, where PLS regression models are used to characterize the correlation between consecutive stages. Instead of monitoring the non-repeating profiles directly, the residual profiles from the PLS models are monitored. A Group Exponentially Weighted Moving Average control chart is adopted to detect both global and local shifts. The performance of the proposed method is compared with conventional methods in a simulation study. Finally, a case study of a hexagonal broaching process is used to illustrate the effectiveness of the proposed methodology in process monitoring and fault diagnosis.</p
