Borgers, B.

de Haas, T.C.A.

Tol, G.W.

ARTS repository - University of Groningen

   University of GroningenPottery Production in the Pontine region, Central ItalyBorgers, B.; Tol, G.W.; de Haas, T.C.A.IMPORTANT NOTE: You are advised to consult the publisher's version (publisher's PDF) if you wish to cite fromit. Please check the document version below.Document VersionPublisher's PDF, also known as Version of recordPublication date:2014Link to publication in University of Groningen/UMCG research databaseCitation for published version (APA):Borgers, B., Tol, G. W., & de Haas, T. C. A. (2014). Pottery Production in the Pontine region, Central Italy.Poster session presented at NPAP Final Conference, Amsterdam, Netherlands.CopyrightOther than for strictly personal use, it is not permitted to download or to forward/distribute the text or part of it without the consent of theauthor(s) and/or copyright holder(s), unless the work is under an open content license (like Creative Commons).The publication may also be distributed here under the terms of Article 25fa of the Dutch Copyright Act, indicated by the “Taverne” license.More information can be found on the University of Groningen website: https://www.rug.nl/library/open-access/self-archiving-pure/taverne-amendment.Take-down policyIf you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediatelyand investigate your claim.Downloaded from the University of Groningen/UMCG research database (Pure): http://www.rug.nl/research/portal. For technical reasons thenumber of authors shown on this cover page is limited to 10 maximum.Download date: 13-02-2023groningen institute of archaeologyuniversity ofgroningenPottery Production in the Pontine Region, Central ItalyB. Borgers, G.W. Tol & T.C.A. de HaasIntroductionThe Groningen Institute of Archaeology (GIA) has conducted field campaigns in the Pontine region since the 1970's, when it became a partner in the excavations of ancient Satricum. Since then, it has extended its scope with field surveys, intensive site mappings, targeted excavations and geo-archaeological examinations throughout the region, within the context of the Pontine Region Project. In the project's current phase, the role of minor settlements in the rural economy of  Roman central Italy is being examined. Such 'Minor Centres' include all kinds of rural settlements that were centres of craft production and exchange, and where religious feasts and administrative tasks were carried out (Tol et al. 2014). Three case-study sites have been selected (Astura, Forum Appii and Ad Medias), which are being studied by a combination of non-invasive archaeological techniques (field walking, geophysical prospection, coring).In studying the relationships between these minor centres and their immediate surroundings, we adopt above all a ceramic approach, which combines typo-morphological classifications with thin section petrography, and we confront material from documented production sites with that from rural consumption sites. This poster presents the petrographic descriptions of all the productions, which have been mapped so far. Sampling strategy and method A total of c. 120 ceramic samples were selected for the purpose of cross-period fabric comparisons. All the ceramic samples were prepared as standard 30 μm sections, and analysed under a polarising light microscope at the Groningen Institute of Archaeology. The ceramic thin sections were grouped in fabrics, based upon the nature of the clay matrix, inclusions and voids, with the underlying aim of identifying evidence for both technological processes and provenance (Quinn 2013, 73–79).Sixteen clay samples were collected near the sites where pottery wasters were identified, and where geophysical research indicated the presence of infrastructure related to pot-making activities. The clay sourcing campaign targeted specific areas around the production sites, and took into account the minerals and raw materials identified in the ceramic thin sections (figs. 4,5). References:QUINN, P.S. 2013,  Ceramic Petrography: the interpretation of archaeological pottery and Related artefacts in thin section, Archaeopress, Oxford.TOL, G., DE HAAS, T.C.A., ARMSTRONG, K. & ATTEMA, P.A.J. 2014, Minor Centres in the Pontine plain: the cases of Forum Appii and Ad Medias, Papers of the British School at Rome 82, 2014, 109-134.Pottery production in the Pontine RegionThe Pontine region is situated 60 km south of Rome. It consists of a large coastal plain, which is bounded by the Alban Hills and the Lepini and Ausoni Mountains to the north and east, and by the Tyrrhenian Sea to the west. The inner most part of this plain is an infamous wetland, the Pontine marshes, that was reclaimed and opened up with the construction of the Via Appia thin the late 4  c. BC (fig. 1).The discovery of physical evidence for ceramic production in the Pontine region is very important, given that it provides secure reference material for local fabrics. Until now production activity have been identified at four different locations in the Pontine plain:  At Forum Appii an area with four kilns was mapped northwest of the confluence of the Cavata river and the Decennovium canal, whereas an industrial zone was identified northeast of the settlement, based on the presence of numerous misfired tiles and cover tiles. Waster fragments of amphorae, coarse ware and black gloss are also present, albeit in lesser quantities. The nd stproduction activity is dated to the late 2  or 1  c. BC (fig. 2a). At Ad Medias, a kiln and numerous waster fragments were identified, comprising tiles, cover tiles, coarse ware and amphorae (fig. 2b). The recovered fragments suggest a date in nd stthe 2  or 1  century BC for the identified productions.  Further information:Barbara Borgers - b.borgers@rug.nlGijs Tol - g.w.tol@rug.nlTymon de Haas - t.c.a.de.haas@rug.nlWebsite: http://minorcenters.gia-mediterranean.nl/ConclusionsThe first results of the petrographic analysis show that the pottery from documented production sites in the Pontine plain can be used to identify potters' technological traditions: whilst potters exploited the same landscape for suitable raw materials, they preferred different materials depending upon their technological traditions. More specifically, it is likely that they explored a red firing colluvial clay for tile production at the sites of Forum Appii and Ad Medias. They used both coarse and fine recipes for the production of tiles and cover tiles, which suggests that there was no strong link between fabric and form. In addition, they may have used a fine, levigated, version for the manufacture of amphorae. As for site 12317, potters seem to have used marine sediments for the manufacture of dolia. In order to further our understanding on the types of raw materials that may have been used in ancient times, in a next stage of the project, the sourced geological deposits will be compared with the identified ceramic fabrics.Figure 1 - The Pontine region with the location of the sites studied in the Minor Centers Project.Dolium: Coarse Augite, Leucite and Ferro-Manganese Inclusions The fabric is characterized by sand-sized sub-angular augite, leucite, quartz (1.5 mm) and rounded ferro-manganese inclusions (2-2.5 mm) in a red firing clay with fine mica and biotite inclusions. It is likely that the augite and leucite inclusions were added as temper (fig. 6).Tile: Clay Mixing Fabric This fabric contains sand-sized angular sanidine feldspar, sub-rounded augite, and rounded quartz and weathered volcanic glass inclusions (2.5 mm). Streaks of two types of clay can be identified: the first is red firing with silt-sized mica and iron-rich inclusions, whilst the second is light-coloured with fine quartz inclusions (fig. 7).Amphora: Fine Red Matrix The fabric is characterised by well-sorted mono-crystalline quartz, sanidine feldspar and augite (< 1 mm) in a red firing micaceous clay. Occasionally, weathered volcanic glass inclusions (2 mm) can be identified, (fig. 8). It may comprise a processed version of the red clay, used for tile production at Forum Appii.Tile: Fine Red fabric The fabric is characterised by sand-sized angular sanidine feldspar in a red micaceous clay. Occasionally, reddish brown clay pellets (2 mm) and quartz and mica inclusions (1 mm) can be identified (fig. 9).Coarse Ware: Fine Red Matrix with Quartz This fabric is characterised by well-sorted quartz, sanidine feldspar (< 0.5 mm) in a red micaceous clay (fig. 10).Figure 2a/b: Infrastructure related to potting activities, including kilns, clay storage tanks and pits, has been identified at the sites of Forum Appii (left) and Ad Medias (right)Figure 3: Geophysical prospection revealed the presence of a pottery kiln, and several anomalies, which may represent clay pits at the site 12317.Figure 5: Clay sourcing campaign with Jan Sevink (UvA).Figure 4: Collection of a clay sample using an auger.Figure 6: Typical fabric of dolia produced at site 12317.Figure 7: Typical fabric of tiles produced at Forum Appii.Figure 8: Typical fabric of amphorae produced at Forum Figure 9: Typical fabric of tiles produced at Ad Medias.Figure 10: Typical fabric of coarse wares produced at Ad Medias.Petrographic ResultsIn addition, a small rural site (12317) yielded evidence for pottery production. The site is located in the interior plain near the Rio Martino canal, which drained the lower Pontine plain to the Tyrrhenian coast (fig. 1). A pottery kiln and several clay pits were identified (fig. 3), and surface finds include kiln fragments and wasters of dolia, whose production is tentatively dated to nd stthe late 2  or 1  c. BC, based on associated surface ceramics.Figure 11: Geophyiscal prospections at Forum Appii.

English

Pottery Production in the Pontine region, Central Italy

Dissertations of the University of Groningen

   University of GroningenPottery Production in the Pontine region, Central ItalyBorgers, B.; Tol, G.W.; de Haas, T.C.A.IMPORTANT NOTE: You are advised to consult the publisher's version (publisher's PDF) if you wish to cite fromit. Please check the document version below.Document VersionPublisher's PDF, also known as Version of recordPublication date:2014Link to publication in University of Groningen/UMCG research databaseCitation for published version (APA):Borgers, B., Tol, G. W., & de Haas, T. C. A. (2014). Pottery Production in the Pontine region, Central Italy.Poster session presented at NPAP Final Conference, Amsterdam, Netherlands.CopyrightOther than for strictly personal use, it is not permitted to download or to forward/distribute the text or part of it without the consent of theauthor(s) and/or copyright holder(s), unless the work is under an open content license (like Creative Commons).The publication may also be distributed here under the terms of Article 25fa of the Dutch Copyright Act, indicated by the “Taverne” license.More information can be found on the University of Groningen website: https://www.rug.nl/library/open-access/self-archiving-pure/taverne-amendment.Take-down policyIf you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediatelyand investigate your claim.Downloaded from the University of Groningen/UMCG research database (Pure): http://www.rug.nl/research/portal. For technical reasons thenumber of authors shown on this cover page is limited to 10 maximum.Download date: 09-09-2023groningen institute of archaeologyuniversity ofgroningenPottery Production in the Pontine Region, Central ItalyB. Borgers, G.W. Tol & T.C.A. de HaasIntroductionThe Groningen Institute of Archaeology (GIA) has conducted field campaigns in the Pontine region since the 1970's, when it became a partner in the excavations of ancient Satricum. Since then, it has extended its scope with field surveys, intensive site mappings, targeted excavations and geo-archaeological examinations throughout the region, within the context of the Pontine Region Project. In the project's current phase, the role of minor settlements in the rural economy of  Roman central Italy is being examined. Such 'Minor Centres' include all kinds of rural settlements that were centres of craft production and exchange, and where religious feasts and administrative tasks were carried out (Tol et al. 2014). Three case-study sites have been selected (Astura, Forum Appii and Ad Medias), which are being studied by a combination of non-invasive archaeological techniques (field walking, geophysical prospection, coring).In studying the relationships between these minor centres and their immediate surroundings, we adopt above all a ceramic approach, which combines typo-morphological classifications with thin section petrography, and we confront material from documented production sites with that from rural consumption sites. This poster presents the petrographic descriptions of all the productions, which have been mapped so far. Sampling strategy and method A total of c. 120 ceramic samples were selected for the purpose of cross-period fabric comparisons. All the ceramic samples were prepared as standard 30 μm sections, and analysed under a polarising light microscope at the Groningen Institute of Archaeology. The ceramic thin sections were grouped in fabrics, based upon the nature of the clay matrix, inclusions and voids, with the underlying aim of identifying evidence for both technological processes and provenance (Quinn 2013, 73–79).Sixteen clay samples were collected near the sites where pottery wasters were identified, and where geophysical research indicated the presence of infrastructure related to pot-making activities. The clay sourcing campaign targeted specific areas around the production sites, and took into account the minerals and raw materials identified in the ceramic thin sections (figs. 4,5). References:QUINN, P.S. 2013,  Ceramic Petrography: the interpretation of archaeological pottery and Related artefacts in thin section, Archaeopress, Oxford.TOL, G., DE HAAS, T.C.A., ARMSTRONG, K. & ATTEMA, P.A.J. 2014, Minor Centres in the Pontine plain: the cases of Forum Appii and Ad Medias, Papers of the British School at Rome 82, 2014, 109-134.Pottery production in the Pontine RegionThe Pontine region is situated 60 km south of Rome. It consists of a large coastal plain, which is bounded by the Alban Hills and the Lepini and Ausoni Mountains to the north and east, and by the Tyrrhenian Sea to the west. The inner most part of this plain is an infamous wetland, the Pontine marshes, that was reclaimed and opened up with the construction of the Via Appia thin the late 4  c. BC (fig. 1).The discovery of physical evidence for ceramic production in the Pontine region is very important, given that it provides secure reference material for local fabrics. Until now production activity have been identified at four different locations in the Pontine plain:  At Forum Appii an area with four kilns was mapped northwest of the confluence of the Cavata river and the Decennovium canal, whereas an industrial zone was identified northeast of the settlement, based on the presence of numerous misfired tiles and cover tiles. Waster fragments of amphorae, coarse ware and black gloss are also present, albeit in lesser quantities. The nd stproduction activity is dated to the late 2  or 1  c. BC (fig. 2a). At Ad Medias, a kiln and numerous waster fragments were identified, comprising tiles, cover tiles, coarse ware and amphorae (fig. 2b). The recovered fragments suggest a date in nd stthe 2  or 1  century BC for the identified productions.  Further information:Barbara Borgers - b.borgers@rug.nlGijs Tol - g.w.tol@rug.nlTymon de Haas - t.c.a.de.haas@rug.nlWebsite: http://minorcenters.gia-mediterranean.nl/ConclusionsThe first results of the petrographic analysis show that the pottery from documented production sites in the Pontine plain can be used to identify potters' technological traditions: whilst potters exploited the same landscape for suitable raw materials, they preferred different materials depending upon their technological traditions. More specifically, it is likely that they explored a red firing colluvial clay for tile production at the sites of Forum Appii and Ad Medias. They used both coarse and fine recipes for the production of tiles and cover tiles, which suggests that there was no strong link between fabric and form. In addition, they may have used a fine, levigated, version for the manufacture of amphorae. As for site 12317, potters seem to have used marine sediments for the manufacture of dolia. In order to further our understanding on the types of raw materials that may have been used in ancient times, in a next stage of the project, the sourced geological deposits will be compared with the identified ceramic fabrics.Figure 1 - The Pontine region with the location of the sites studied in the Minor Centers Project.Dolium: Coarse Augite, Leucite and Ferro-Manganese Inclusions The fabric is characterized by sand-sized sub-angular augite, leucite, quartz (1.5 mm) and rounded ferro-manganese inclusions (2-2.5 mm) in a red firing clay with fine mica and biotite inclusions. It is likely that the augite and leucite inclusions were added as temper (fig. 6).Tile: Clay Mixing Fabric This fabric contains sand-sized angular sanidine feldspar, sub-rounded augite, and rounded quartz and weathered volcanic glass inclusions (2.5 mm). Streaks of two types of clay can be identified: the first is red firing with silt-sized mica and iron-rich inclusions, whilst the second is light-coloured with fine quartz inclusions (fig. 7).Amphora: Fine Red Matrix The fabric is characterised by well-sorted mono-crystalline quartz, sanidine feldspar and augite (< 1 mm) in a red firing micaceous clay. Occasionally, weathered volcanic glass inclusions (2 mm) can be identified, (fig. 8). It may comprise a processed version of the red clay, used for tile production at Forum Appii.Tile: Fine Red fabric The fabric is characterised by sand-sized angular sanidine feldspar in a red micaceous clay. Occasionally, reddish brown clay pellets (2 mm) and quartz and mica inclusions (1 mm) can be identified (fig. 9).Coarse Ware: Fine Red Matrix with Quartz This fabric is characterised by well-sorted quartz, sanidine feldspar (< 0.5 mm) in a red micaceous clay (fig. 10).Figure 2a/b: Infrastructure related to potting activities, including kilns, clay storage tanks and pits, has been identified at the sites of Forum Appii (left) and Ad Medias (right)Figure 3: Geophysical prospection revealed the presence of a pottery kiln, and several anomalies, which may represent clay pits at the site 12317.Figure 5: Clay sourcing campaign with Jan Sevink (UvA).Figure 4: Collection of a clay sample using an auger.Figure 6: Typical fabric of dolia produced at site 12317.Figure 7: Typical fabric of tiles produced at Forum Appii.Figure 8: Typical fabric of amphorae produced at Forum Figure 9: Typical fabric of tiles produced at Ad Medias.Figure 10: Typical fabric of coarse wares produced at Ad Medias.Petrographic ResultsIn addition, a small rural site (12317) yielded evidence for pottery production. The site is located in the interior plain near the Rio Martino canal, which drained the lower Pontine plain to the Tyrrhenian coast (fig. 1). A pottery kiln and several clay pits were identified (fig. 3), and surface finds include kiln fragments and wasters of dolia, whose production is tentatively dated to nd stthe late 2  or 1  c. BC, based on associated surface ceramics.Figure 11: Geophyiscal prospections at Forum Appii.

Proceedings - University of Groningen

   University of GroningenPottery Production in the Pontine region, Central ItalyBorgers, B.; Tol, G.W.; de Haas, T.C.A.IMPORTANT NOTE: You are advised to consult the publisher's version (publisher's PDF) if you wish to cite fromit. Please check the document version below.Document VersionPublisher's PDF, also known as Version of recordPublication date:2014Link to publication in University of Groningen/UMCG research databaseCitation for published version (APA):Borgers, B., Tol, G. W., & de Haas, T. C. A. (2014). Pottery Production in the Pontine region, Central Italy.Poster session presented at NPAP Final Conference, Amsterdam, Netherlands.CopyrightOther than for strictly personal use, it is not permitted to download or to forward/distribute the text or part of it without the consent of theauthor(s) and/or copyright holder(s), unless the work is under an open content license (like Creative Commons).The publication may also be distributed here under the terms of Article 25fa of the Dutch Copyright Act, indicated by the “Taverne” license.More information can be found on the University of Groningen website: https://www.rug.nl/library/open-access/self-archiving-pure/taverne-amendment.Take-down policyIf you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediatelyand investigate your claim.Downloaded from the University of Groningen/UMCG research database (Pure): http://www.rug.nl/research/portal. For technical reasons thenumber of authors shown on this cover page is limited to 10 maximum.Download date: 12-10-2022groningen institute of archaeologyuniversity ofgroningenPottery Production in the Pontine Region, Central ItalyB. Borgers, G.W. Tol & T.C.A. de HaasIntroductionThe Groningen Institute of Archaeology (GIA) has conducted field campaigns in the Pontine region since the 1970's, when it became a partner in the excavations of ancient Satricum. Since then, it has extended its scope with field surveys, intensive site mappings, targeted excavations and geo-archaeological examinations throughout the region, within the context of the Pontine Region Project. In the project's current phase, the role of minor settlements in the rural economy of  Roman central Italy is being examined. Such 'Minor Centres' include all kinds of rural settlements that were centres of craft production and exchange, and where religious feasts and administrative tasks were carried out (Tol et al. 2014). Three case-study sites have been selected (Astura, Forum Appii and Ad Medias), which are being studied by a combination of non-invasive archaeological techniques (field walking, geophysical prospection, coring).In studying the relationships between these minor centres and their immediate surroundings, we adopt above all a ceramic approach, which combines typo-morphological classifications with thin section petrography, and we confront material from documented production sites with that from rural consumption sites. This poster presents the petrographic descriptions of all the productions, which have been mapped so far. Sampling strategy and method A total of c. 120 ceramic samples were selected for the purpose of cross-period fabric comparisons. All the ceramic samples were prepared as standard 30 μm sections, and analysed under a polarising light microscope at the Groningen Institute of Archaeology. The ceramic thin sections were grouped in fabrics, based upon the nature of the clay matrix, inclusions and voids, with the underlying aim of identifying evidence for both technological processes and provenance (Quinn 2013, 73–79).Sixteen clay samples were collected near the sites where pottery wasters were identified, and where geophysical research indicated the presence of infrastructure related to pot-making activities. The clay sourcing campaign targeted specific areas around the production sites, and took into account the minerals and raw materials identified in the ceramic thin sections (figs. 4,5). References:QUINN, P.S. 2013,  Ceramic Petrography: the interpretation of archaeological pottery and Related artefacts in thin section, Archaeopress, Oxford.TOL, G., DE HAAS, T.C.A., ARMSTRONG, K. & ATTEMA, P.A.J. 2014, Minor Centres in the Pontine plain: the cases of Forum Appii and Ad Medias, Papers of the British School at Rome 82, 2014, 109-134.Pottery production in the Pontine RegionThe Pontine region is situated 60 km south of Rome. It consists of a large coastal plain, which is bounded by the Alban Hills and the Lepini and Ausoni Mountains to the north and east, and by the Tyrrhenian Sea to the west. The inner most part of this plain is an infamous wetland, the Pontine marshes, that was reclaimed and opened up with the construction of the Via Appia thin the late 4  c. BC (fig. 1).The discovery of physical evidence for ceramic production in the Pontine region is very important, given that it provides secure reference material for local fabrics. Until now production activity have been identified at four different locations in the Pontine plain:  At Forum Appii an area with four kilns was mapped northwest of the confluence of the Cavata river and the Decennovium canal, whereas an industrial zone was identified northeast of the settlement, based on the presence of numerous misfired tiles and cover tiles. Waster fragments of amphorae, coarse ware and black gloss are also present, albeit in lesser quantities. The nd stproduction activity is dated to the late 2  or 1  c. BC (fig. 2a). At Ad Medias, a kiln and numerous waster fragments were identified, comprising tiles, cover tiles, coarse ware and amphorae (fig. 2b). The recovered fragments suggest a date in nd stthe 2  or 1  century BC for the identified productions.  Further information:Barbara Borgers - b.borgers@rug.nlGijs Tol - g.w.tol@rug.nlTymon de Haas - t.c.a.de.haas@rug.nlWebsite: http://minorcenters.gia-mediterranean.nl/ConclusionsThe first results of the petrographic analysis show that the pottery from documented production sites in the Pontine plain can be used to identify potters' technological traditions: whilst potters exploited the same landscape for suitable raw materials, they preferred different materials depending upon their technological traditions. More specifically, it is likely that they explored a red firing colluvial clay for tile production at the sites of Forum Appii and Ad Medias. They used both coarse and fine recipes for the production of tiles and cover tiles, which suggests that there was no strong link between fabric and form. In addition, they may have used a fine, levigated, version for the manufacture of amphorae. As for site 12317, potters seem to have used marine sediments for the manufacture of dolia. In order to further our understanding on the types of raw materials that may have been used in ancient times, in a next stage of the project, the sourced geological deposits will be compared with the identified ceramic fabrics.Figure 1 - The Pontine region with the location of the sites studied in the Minor Centers Project.Dolium: Coarse Augite, Leucite and Ferro-Manganese Inclusions The fabric is characterized by sand-sized sub-angular augite, leucite, quartz (1.5 mm) and rounded ferro-manganese inclusions (2-2.5 mm) in a red firing clay with fine mica and biotite inclusions. It is likely that the augite and leucite inclusions were added as temper (fig. 6).Tile: Clay Mixing Fabric This fabric contains sand-sized angular sanidine feldspar, sub-rounded augite, and rounded quartz and weathered volcanic glass inclusions (2.5 mm). Streaks of two types of clay can be identified: the first is red firing with silt-sized mica and iron-rich inclusions, whilst the second is light-coloured with fine quartz inclusions (fig. 7).Amphora: Fine Red Matrix The fabric is characterised by well-sorted mono-crystalline quartz, sanidine feldspar and augite (< 1 mm) in a red firing micaceous clay. Occasionally, weathered volcanic glass inclusions (2 mm) can be identified, (fig. 8). It may comprise a processed version of the red clay, used for tile production at Forum Appii.Tile: Fine Red fabric The fabric is characterised by sand-sized angular sanidine feldspar in a red micaceous clay. Occasionally, reddish brown clay pellets (2 mm) and quartz and mica inclusions (1 mm) can be identified (fig. 9).Coarse Ware: Fine Red Matrix with Quartz This fabric is characterised by well-sorted quartz, sanidine feldspar (< 0.5 mm) in a red micaceous clay (fig. 10).Figure 2a/b: Infrastructure related to potting activities, including kilns, clay storage tanks and pits, has been identified at the sites of Forum Appii (left) and Ad Medias (right)Figure 3: Geophysical prospection revealed the presence of a pottery kiln, and several anomalies, which may represent clay pits at the site 12317.Figure 5: Clay sourcing campaign with Jan Sevink (UvA).Figure 4: Collection of a clay sample using an auger.Figure 6: Typical fabric of dolia produced at site 12317.Figure 7: Typical fabric of tiles produced at Forum Appii.Figure 8: Typical fabric of amphorae produced at Forum Figure 9: Typical fabric of tiles produced at Ad Medias.Figure 10: Typical fabric of coarse wares produced at Ad Medias.Petrographic ResultsIn addition, a small rural site (12317) yielded evidence for pottery production. The site is located in the interior plain near the Rio Martino canal, which drained the lower Pontine plain to the Tyrrhenian coast (fig. 1). A pottery kiln and several clay pits were identified (fig. 3), and surface finds include kiln fragments and wasters of dolia, whose production is tentatively dated to nd stthe late 2  or 1  c. BC, based on associated surface ceramics.Figure 11: Geophyiscal prospections at Forum Appii.

NARCIS 

University of Groningen Research Database

  
 University of Groningen
Pottery Production in the Pontine region, Central Italy
Borgers, B.; Tol, G.W.; de Haas, T.C.A.
IMPORTANT NOTE: You are advised to consult the publisher's version (publisher's PDF) if you wish to cite from
it. Please check the document version below.
Document Version
Publisher's PDF, also known as Version of record
Publication date:
2014
Link to publication in University of Groningen/UMCG research database
Citation for published version (APA):
Borgers, B., Tol, G. W., & de Haas, T. C. A. (2014). Pottery Production in the Pontine region, Central Italy.
Poster session presented at NPAP Final Conference, Amsterdam, Netherlands.
Copyright
Other than for strictly personal use, it is not permitted to download or to forward/distribute the text or part of it without the consent of the
author(s) and/or copyright holder(s), unless the work is under an open content license (like Creative Commons).
Take-down policy
If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately
and investigate your claim.
Downloaded from the University of Groningen/UMCG research database (Pure): http://www.rug.nl/research/portal. For technical reasons the
number of authors shown on this cover page is limited to 10 maximum.
Download date: 11-02-2018
groningen institute of archaeologyuniversity of
groningen
Pottery Production in the Pontine Region, Central Italy
B. Borgers, G.W. Tol & T.C.A. de Haas
Introduction
The Groningen Institute of Archaeology (GIA) has conducted 
field campaigns in the Pontine region since the 1970's, when it 
became a partner in the excavations of ancient Satricum. 
Since then, it has extended its scope with field surveys, 
intensive site mappings, targeted excavations and geo-
archaeological examinations throughout the region, within the 
context of the Pontine Region Project. In the project's current 
phase, the role of minor settlements in the rural economy of 
 
Roman central Italy is being examined. Such 'Minor Centres' 
include all kinds of rural settlements that were centres of craft 
production and exchange, and where religious feasts and 
administrative tasks were carried out (Tol et al. 2014). Three 
case-study sites have been selected (Astura, Forum Appii and 
Ad Medias), which are being studied by a combination of non-
invasive archaeological techniques (field walking, geophysical 
prospection, coring).
In studying the relationships between these minor centres and 
their immediate surroundings, we adopt above all a ceramic 
approach, which combines typo-morphological classifications 
with thin section petrography, and we confront material from 
documented production sites with that from rural consumption 
sites. This poster presents the petrographic descriptions of all 
the productions, which have been mapped so far. 
Sampling strategy and method 
A total of c. 120 ceramic samples were selected for the 
purpose of cross-period fabric comparisons. All the ceramic 
samples were prepared as standard 30 μm sections, and 
analysed under a polarising light microscope at the Groningen 
Institute of Archaeology. The ceramic thin sections were 
grouped in fabrics, based upon the nature of the clay matrix, 
inclusions and voids, with the underlying aim of identifying 
evidence for both technological processes and provenance 
(Quinn 2013, 73–79).
Sixteen clay samples were collected near the sites where 
pottery wasters were identified, and where geophysical 
research indicated the presence of infrastructure related to 
pot-making activities. The clay sourcing campaign targeted 
specific areas around the production sites, and took into 
account the minerals and raw materials identified in the 
ceramic thin sections (figs. 4,5). 
References:
QUINN, P.S. 2013,  Ceramic Petrography: the interpretation of 
archaeological pottery and Related artefacts in thin 
section, Archaeopress, Oxford.
TOL, G., DE HAAS, T.C.A., ARMSTRONG, K. & ATTEMA, P.A.J. 2014, 
Minor Centres in the Pontine plain: the cases of Forum 
Appii and Ad Medias, Papers of the British School at 
Rome 82, 2014, 109-134.
Pottery production in the Pontine Region
The Pontine region is situated 60 km south of Rome. It consists 
of a large coastal plain, which is bounded by the Alban Hills and 
the Lepini and Ausoni Mountains to the north and east, and by 
the Tyrrhenian Sea to the west. The inner most part of this plain 
is an infamous wetland, the Pontine marshes, that was 
reclaimed and opened up with the construction of the Via Appia 
th
in the late 4  c. BC (fig. 1).
The discovery of physical evidence for ceramic production in 
the Pontine region is very important, given that it provides 
secure reference material for local fabrics. Until now 
production activity have been identified at four different 
locations in the Pontine plain:  
At Forum Appii an area with four kilns was mapped northwest of 
the confluence of the Cavata river and the Decennovium canal, 
whereas an industrial zone was identified northeast of the 
settlement, based on the presence of numerous misfired tiles 
and cover tiles. Waster fragments of amphorae, coarse ware 
and black gloss are also present, albeit in lesser quantities. The 
nd st
production activity is dated to the late 2  or 1  c. BC (fig. 2a). 
At Ad Medias, a kiln and numerous waster fragments were 
identified, comprising tiles, cover tiles, coarse ware and 
amphorae (fig. 2b). The recovered fragments suggest a date in 
nd st
the 2  or 1  century BC for the identified productions.  
Further information:
Barbara Borgers - b.borgers@rug.nl
Gijs Tol - g.w.tol@rug.nl
Tymon de Haas - t.c.a.de.haas@rug.nl
Website: http://minorcenters.gia-mediterranean.nl/
Conclusions
The first results of the petrographic analysis show that the 
pottery from documented production sites in the Pontine plain 
can be used to identify potters' technological traditions: whilst 
potters exploited the same landscape for suitable raw 
materials, they preferred different materials depending upon 
their technological traditions. More specifically, it is likely that 
they explored a red firing colluvial clay for tile production at the 
sites of Forum Appii and Ad Medias. They used both coarse 
and fine recipes for the production of tiles and cover tiles, 
which suggests that there was no strong link between fabric 
and form. In addition, they may have used a fine, levigated, 
version for the manufacture of amphorae. As for site 12317, 
potters seem to have used marine sediments for the 
manufacture of dolia. In order to further our understanding on 
the types of raw materials that may have been used in ancient 
times, in a next stage of the project, the sourced geological 
deposits will be compared with the identified ceramic fabrics.
Figure 1 - The Pontine region with the location of the sites studied in the Minor Centers Project.
Dolium: Coarse Augite, Leucite and 
Ferro-Manganese Inclusions 
The fabric is characterized by sand-sized 
sub-angular augite, leucite, quartz (1.5 
mm) and rounded ferro-manganese 
inclusions (2-2.5 mm) in a red firing clay 
with fine mica and biotite inclusions. It is 
likely that the augite and leucite inclusions 
were added as temper (fig. 6).
Tile: Clay Mixing Fabric 
This fabric contains sand-sized angular 
sanidine feldspar, sub-rounded augite, 
and rounded quartz and weathered 
volcanic glass inclusions (2.5 mm). 
Streaks of two types of clay can be 
identified: the first is red firing with silt-
sized mica and iron-rich inclusions, whilst 
the second is light-coloured with fine 
quartz inclusions (fig. 7).
Amphora: Fine Red Matrix 
The fabric is characterised by well-sorted 
mono-crystalline quartz, sanidine feldspar 
and augite (< 1 mm) in a red firing 
micaceous clay. Occasionally, weathered 
volcanic glass inclusions (2 mm) can be 
identified, (fig. 8). It may comprise a 
processed version of the red clay, used for 
tile production at Forum Appii.
Tile: Fine Red fabric 
The fabric is characterised by sand-sized 
angular sanidine feldspar in a red 
micaceous clay. Occasionally, reddish 
brown clay pellets (2 mm) and quartz and 
mica inclusions (1 mm) can be identified 
(fig. 9).
Coarse Ware: Fine Red Matrix with 
Quartz 
This fabric is characterised by well-sorted 
quartz, sanidine feldspar (< 0.5 mm) in a 
red micaceous clay (fig. 10).
Figure 2a/b: Infrastructure related to potting activities, including kilns, clay storage tanks 
and pits, has been identified at the sites of Forum Appii (left) and Ad Medias (right)
Figure 3: Geophysical prospection revealed the presence of a pottery kiln, and several 
anomalies, which may represent clay pits at the site 12317.
Figure 5: Clay sourcing campaign 
with Jan Sevink (UvA).
Figure 4: Collection of a clay sample using an 
auger.
Figure 6: Typical fabric of dolia 
produced at site 12317.
Figure 7: Typical fabric of tiles 
produced at Forum Appii.
Figure 8: Typical fabric of 
amphorae produced at Forum 
Figure 9: Typical fabric of tiles 
produced at Ad Medias.
Figure 10: Typical fabric of coarse 
wares produced at Ad Medias.
Petrographic Results
In addition, a small rural site (12317) yielded evidence for 
pottery production. The site is located in the interior plain near 
the Rio Martino canal, which drained the lower Pontine plain to 
the Tyrrhenian coast (fig. 1). A pottery kiln and several clay pits 
were identified (fig. 3), and surface finds include kiln fragments 
and wasters of dolia, whose production is tentatively dated to 
nd st
the late 2  or 1  c. BC, based on associated surface ceramics.
Figure 11: Geophyiscal prospections at Forum Appii.


University of Groningen

   University of GroningenPottery Production in the Pontine region, Central ItalyBorgers, B.; Tol, G.W.; de Haas, T.C.A.IMPORTANT NOTE: You are advised to consult the publisher's version (publisher's PDF) if you wish to cite fromit. Please check the document version below.Document VersionPublisher's PDF, also known as Version of recordPublication date:2014Link to publication in University of Groningen/UMCG research databaseCitation for published version (APA):Borgers, B., Tol, G. W., & de Haas, T. C. A. (2014). Pottery Production in the Pontine region, Central Italy.Poster session presented at NPAP Final Conference, Amsterdam, Netherlands.CopyrightOther than for strictly personal use, it is not permitted to download or to forward/distribute the text or part of it without the consent of theauthor(s) and/or copyright holder(s), unless the work is under an open content license (like Creative Commons).Take-down policyIf you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediatelyand investigate your claim.Downloaded from the University of Groningen/UMCG research database (Pure): http://www.rug.nl/research/portal. For technical reasons thenumber of authors shown on this cover page is limited to 10 maximum.Download date: 12-11-2019groningen institute of archaeologyuniversity ofgroningenPottery Production in the Pontine Region, Central ItalyB. Borgers, G.W. Tol & T.C.A. de HaasIntroductionThe Groningen Institute of Archaeology (GIA) has conducted field campaigns in the Pontine region since the 1970's, when it became a partner in the excavations of ancient Satricum. Since then, it has extended its scope with field surveys, intensive site mappings, targeted excavations and geo-archaeological examinations throughout the region, within the context of the Pontine Region Project. In the project's current phase, the role of minor settlements in the rural economy of  Roman central Italy is being examined. Such 'Minor Centres' include all kinds of rural settlements that were centres of craft production and exchange, and where religious feasts and administrative tasks were carried out (Tol et al. 2014). Three case-study sites have been selected (Astura, Forum Appii and Ad Medias), which are being studied by a combination of non-invasive archaeological techniques (field walking, geophysical prospection, coring).In studying the relationships between these minor centres and their immediate surroundings, we adopt above all a ceramic approach, which combines typo-morphological classifications with thin section petrography, and we confront material from documented production sites with that from rural consumption sites. This poster presents the petrographic descriptions of all the productions, which have been mapped so far. Sampling strategy and method A total of c. 120 ceramic samples were selected for the purpose of cross-period fabric comparisons. All the ceramic samples were prepared as standard 30 μm sections, and analysed under a polarising light microscope at the Groningen Institute of Archaeology. The ceramic thin sections were grouped in fabrics, based upon the nature of the clay matrix, inclusions and voids, with the underlying aim of identifying evidence for both technological processes and provenance (Quinn 2013, 73–79).Sixteen clay samples were collected near the sites where pottery wasters were identified, and where geophysical research indicated the presence of infrastructure related to pot-making activities. The clay sourcing campaign targeted specific areas around the production sites, and took into account the minerals and raw materials identified in the ceramic thin sections (figs. 4,5). References:QUINN, P.S. 2013,  Ceramic Petrography: the interpretation of archaeological pottery and Related artefacts in thin section, Archaeopress, Oxford.TOL, G., DE HAAS, T.C.A., ARMSTRONG, K. & ATTEMA, P.A.J. 2014, Minor Centres in the Pontine plain: the cases of Forum Appii and Ad Medias, Papers of the British School at Rome 82, 2014, 109-134.Pottery production in the Pontine RegionThe Pontine region is situated 60 km south of Rome. It consists of a large coastal plain, which is bounded by the Alban Hills and the Lepini and Ausoni Mountains to the north and east, and by the Tyrrhenian Sea to the west. The inner most part of this plain is an infamous wetland, the Pontine marshes, that was reclaimed and opened up with the construction of the Via Appia thin the late 4  c. BC (fig. 1).The discovery of physical evidence for ceramic production in the Pontine region is very important, given that it provides secure reference material for local fabrics. Until now production activity have been identified at four different locations in the Pontine plain:  At Forum Appii an area with four kilns was mapped northwest of the confluence of the Cavata river and the Decennovium canal, whereas an industrial zone was identified northeast of the settlement, based on the presence of numerous misfired tiles and cover tiles. Waster fragments of amphorae, coarse ware and black gloss are also present, albeit in lesser quantities. The nd stproduction activity is dated to the late 2  or 1  c. BC (fig. 2a). At Ad Medias, a kiln and numerous waster fragments were identified, comprising tiles, cover tiles, coarse ware and amphorae (fig. 2b). The recovered fragments suggest a date in nd stthe 2  or 1  century BC for the identified productions.  Further information:Barbara Borgers - b.borgers@rug.nlGijs Tol - g.w.tol@rug.nlTymon de Haas - t.c.a.de.haas@rug.nlWebsite: http://minorcenters.gia-mediterranean.nl/ConclusionsThe first results of the petrographic analysis show that the pottery from documented production sites in the Pontine plain can be used to identify potters' technological traditions: whilst potters exploited the same landscape for suitable raw materials, they preferred different materials depending upon their technological traditions. More specifically, it is likely that they explored a red firing colluvial clay for tile production at the sites of Forum Appii and Ad Medias. They used both coarse and fine recipes for the production of tiles and cover tiles, which suggests that there was no strong link between fabric and form. In addition, they may have used a fine, levigated, version for the manufacture of amphorae. As for site 12317, potters seem to have used marine sediments for the manufacture of dolia. In order to further our understanding on the types of raw materials that may have been used in ancient times, in a next stage of the project, the sourced geological deposits will be compared with the identified ceramic fabrics.Figure 1 - The Pontine region with the location of the sites studied in the Minor Centers Project.Dolium: Coarse Augite, Leucite and Ferro-Manganese Inclusions The fabric is characterized by sand-sized sub-angular augite, leucite, quartz (1.5 mm) and rounded ferro-manganese inclusions (2-2.5 mm) in a red firing clay with fine mica and biotite inclusions. It is likely that the augite and leucite inclusions were added as temper (fig. 6).Tile: Clay Mixing Fabric This fabric contains sand-sized angular sanidine feldspar, sub-rounded augite, and rounded quartz and weathered volcanic glass inclusions (2.5 mm). Streaks of two types of clay can be identified: the first is red firing with silt-sized mica and iron-rich inclusions, whilst the second is light-coloured with fine quartz inclusions (fig. 7).Amphora: Fine Red Matrix The fabric is characterised by well-sorted mono-crystalline quartz, sanidine feldspar and augite (< 1 mm) in a red firing micaceous clay. Occasionally, weathered volcanic glass inclusions (2 mm) can be identified, (fig. 8). It may comprise a processed version of the red clay, used for tile production at Forum Appii.Tile: Fine Red fabric The fabric is characterised by sand-sized angular sanidine feldspar in a red micaceous clay. Occasionally, reddish brown clay pellets (2 mm) and quartz and mica inclusions (1 mm) can be identified (fig. 9).Coarse Ware: Fine Red Matrix with Quartz This fabric is characterised by well-sorted quartz, sanidine feldspar (< 0.5 mm) in a red micaceous clay (fig. 10).Figure 2a/b: Infrastructure related to potting activities, including kilns, clay storage tanks and pits, has been identified at the sites of Forum Appii (left) and Ad Medias (right)Figure 3: Geophysical prospection revealed the presence of a pottery kiln, and several anomalies, which may represent clay pits at the site 12317.Figure 5: Clay sourcing campaign with Jan Sevink (UvA).Figure 4: Collection of a clay sample using an auger.Figure 6: Typical fabric of dolia produced at site 12317.Figure 7: Typical fabric of tiles produced at Forum Appii.Figure 8: Typical fabric of amphorae produced at Forum Figure 9: Typical fabric of tiles produced at Ad Medias.Figure 10: Typical fabric of coarse wares produced at Ad Medias.Petrographic ResultsIn addition, a small rural site (12317) yielded evidence for pottery production. The site is located in the interior plain near the Rio Martino canal, which drained the lower Pontine plain to the Tyrrhenian coast (fig. 1). A pottery kiln and several clay pits were identified (fig. 3), and surface finds include kiln fragments and wasters of dolia, whose production is tentatively dated to nd stthe late 2  or 1  c. BC, based on associated surface ceramics.Figure 11: Geophyiscal prospections at Forum Appii.

https://pure.rug.nl/ws/files/14997298/Poster_NPAP_final.pdf

Pottery Production in the Pontine region, Central Italy

Abstract

Similar works

Full text

Available Versions

ARTS repository - University of Groningen

Dissertations of the University of Groningen

Proceedings - University of Groningen

Proceedings - University of Groningen

NARCIS

University of Groningen Research Database

University of Groningen

ARTS repository - University of Groningen

Dissertations of the University of Groningen