4 pp., 4 photosIntegrated Pest Management (IPM) can be used to control weeds, keep lawns healthy and protect the environment. This publication explains the steps to take in an IPM program and the importance of calibrating equipment and making proper calculations when pesticides need to be applied

Baumann, Paul A.

Ketchersid, Mary

English

Texas A&amp;M Repository

T here are more than 2 million acres of lawns in Texas and nearly 1.9 million acres of maintained turf in parks, golf courses and other public places. To control weeds in lawns, approximately 50 per-cent of homeowners use herbicides.  The use of herbicides increases as the public use of an area increases. An average of 59 percent of all turf areas are treated with some amount of weed control chemical. As much as 87 per-cent of school yard and turf areas and 97 percent of golf courses are treated with herbicides. Herbicides are tools used to create beautiful landscapes. Herbicide use on lawns and ornamental plants keeps them free of weeds, creates an aes-thetically pleasing area and maximizes plant growth. These tools, however, should be used in a balanced pest management program.Herbicides, used unwisely or indiscriminately, add to environmental pollution. Herbicides will leach and/or runoff, especially if overwatering or excessive rainfall immediately fol-lows application. Surface water can become contaminated with turfgrass Protecting the EnvironmentUsing Integrated Weed Management in LawnsMary L. Ketchersid and Paul A. Baumann*herbicides that are easily dissolved in water and used near hard surfaces such as streets, sidewalks, parking lots and driveways. Because excess water cannot soak into the ground, it accu-mulates and rushes into storm sewers and waterways as runoff. Storm drains, common in urban areas, carry water directly to the nearest stream. The water does not go through any treat-ment process. To reduce the risk of surface and groundwater contamination, herbicide users should follow the principles of Integrated Pest Management (IPM) for weed control. The goal of IPM is to decrease dependence on chemicals by increasing the use of cultural, mechan-ical and biological control measures. IPM measures enable the turfgrass manager or homeowner to maintain vigorous, attractive turf, to protect the soil, and to preserve the purity of ground and surface water. How can IPM help?It is the responsibility of every herbicide user, whether an agricultural producer or urban home- owner, to prevent water pollution by herbicides. There are many things that homeown-ers can do to prevent pollution. Begin with maintaining a thick, healthy lawn that prevents erosion and weed inva-sion. This practice also helps moderate summer heat, improves soil structure, and increases water infiltration while adding organic matter to the soil. Organic matter in the soil helps hold nutrients and herbicides near the soil surface where they are most effective. A healthy, vigorous stand of grass can outcompete most weeds, and also tolerates some damage from fungi and insects.Integrated Pest (Weed) Manage-ment measures include a number of common sense, practical approaches to achieve economical and effective weed control with the least risk to the environment. By balancing the use of herbicides with other control tactics, IPM programs reduce reliance on herbicides. The best IPM measure to prevent groundwater contamination and to reduce runoff in urban areas is to maintain a dense, healthy turf. To accomplish this, the following turfgrass management practices are recommended.*Extension Program Specialist and Professor and Extension Weed Specialist, The Texas A&M University System.L-53243/08REMINDER — Be water friendly and earth smart by reducing the potential for herbicide runoff in urban areas.Use prevention techniques: When purchasing lawn seed, buy seed that is free of weed seed as indicated on the label. When installing turfgrass sod, do not purchase sod that has weeds or other undesirable turf species growing in it. When buying topsoil to spread prior to lawn establishment or for leveling purposes in established lawns, receive assurance from the supplier that the soil is relatively free of weed seed and nutsedge tubers. Plant adapted turfgrass variet-ies: Plant the best adapted variety and type of turfgrass for the area. Mow established turfgrasses at heights and frequencies recommended for the variety to increase turf density and vigor and to reduce weed and disease problems. This also helps keep herbi-cide-treated soil in place and increases water infiltration.Follow recommended fertility practices: Moderate fertilization based on grass species, environmental condi-tions, mowing practices and turf use is critical. Both too much or too little fertility weakens the turf and allows weeds, diseases and insects to move in. Use a good slow-release fertilizer or organic program to keep the fertility level uniform. To determine fertiliza-tion requirements, a good soil test is needed. Contact the county Extension office for proper soil test sampling procedures. Samples can be submitted to the Soil, Water, and Forage Testing Laboratory at Texas A&M University or another soil testing laboratory. Conserve water: Watering prac-tices have a significant impact on weed populations and pest activity. Infre-quent deep watering encourages the development of a strong, deep root system and stronger turf. Excessive watering can result in runoff of herbi-cides in surface water.Aerate the soil: Aeration of the turf helps water penetrate to the proper depth and helps encourage a deep root system. Aeration can be done with mechanical or manual tools. Aeration also promotes beneficial soil micro-bial activity, which in turn builds a healthier growing medium for the turf. Aeration and cultural practices such as vertical mowing and top-dressing help decrease thatch buildup. Thatch accumulation can increase insect and disease activity and reduce pesticide effectiveness. Aeration encourages herbicide infiltration with rainfall or irrigation water into the soil profile.Manage insects and disease: Insects and diseases create weakened stands of turf and can cause death over large areas. This weakened and open condition invites weed germination and growth and also creates a situation where herbicide runoff can occur.Employ mechanical measures: This includes some of the most com-mon weed control activities such as mowing, hand pulling, hoeing and tilling. In extreme situations, whole sections of the lawn might need to be removed and resodded. Extensive soil conditioning is then possible before resodding. Basic, nonchemical ap-proaches such as these have an obvi-ous effect on reducing herbicides in the environment.Spot treat with herbicides: Chemi-cal treatment might be required if weeds reach a critical population. Use the least amount of herbicide over the smallest area that will effectively control the problem. Many herbicides available at lawn and garden stores are in ready-to-spray formulations. Read the labels carefully; the herbicide might be selective and only control broadleaf or grass weeds or it might be nonselective and kill what-ever it contacts. A spot treatment will mini-mize the amount of product used and reduce the risk of runoff.What are some considerations when using herbicides?If the use of a herbicide on a broad-cast basis is necessary, there are many points to consider.Choose the correct herbicide: Is a herbicide application really needed? Is the weed problem likely to persist and cause more problems or will it die out after a short time? Should a preemergence (preventative) weed treatment be used or should herbi-cides be applied after a weed problem develops? Consider the answers to these questions before choosing a her-bicide. Also, consider what weeds have been present in the past, study recom-mendation books and labels, and seek advice from an expert in the field. Apply it properly: Herbicides often are overapplied in urban areas because the actual amount needed was not cal-culated or the application equipment was not calibrated. Over-application A soil test helps determine fertilization requirements.can cause damage to trees and other desirable plants. Always read and fol-low label instructions before applying any pesticide. Read the label carefully, making sure that all directions and warnings are understood before use, and then follow all label directions. Rinse empty herbicide containers at least three times and put the rinsate back into the spray solution. Do not use a herbicide unless it is registered for use on the specific type of turf-grass. Be sure application equipment is properly calibrated and in good working condition before use. Do not mix or apply more than the amount needed. If possible, leave an untreated strip next to curbs, driveways, and sidewalks and use other weed control  methods in these areas. This will keep the herbicide away from areas prone to runoff. Do not apply a preemer-gence herbicide when heavy rains that might cause runoff are forecast. Also, do not apply postemergence materials in windy conditions that would cause them to drift onto sensitive plants or sensitive runoff areas.no rain is in the forecast, water the treated area with ½ inch of slow sprinkler irrigation to dis-solve the herbicide and move it into the soil profile. Normal wet-ting and drying cycles generally will keep the herbicide in the top 1 to 6 inches of the soil profile. Never ap-ply water to the point of runoff. Water as infrequently as possible, but try to wet the soil to a depth of 4 to 6 inches when water is applied. To check on the amount applied, collect water in a pie pan or rain gauge placed within the area being watered. It takes approxi-mately ½ to 1 inch of applied water to wet the soil 4 to 6 inches deep, de-pending on the soil texture. Clean up property and equipment: Do not apply or spill the herbicide ma-terial on the driveway, sidewalk, curb or street. If a dry herbicide formula-tion is spilled, sweep it up immedi-ately. If a liquid herbicide formulation is spilled, first absorb it with soil, pet litter or other inert absorbent then sweep it up and dispose at an appro-priate site. Do not wash spills into the streets and storm drains. Following an application, it is important to properly clean the equipment. Equipment rinse water can be sprayed over the area just treated. Never empty residues onto bare ground. This will concentrate the herbicide in the soil. Never pour rinsate, unused herbicide concentrate, or mixtures into storm drains, sewers, onto the driveway or down the sink. This can contaminate water supplies. Dispose of leftover concentrate and containers according to state and local regulations or at household hazardous waste collection sites. Are calculations and calibration necessary? Yes, they are absolutely necessary! Begin by determining the area to be treated. Use a tape measure and mea-sure the length and width of the lawn to determine the area in square feet. If the lawn is irregular, sketch it out and divide it into smaller blocks. After the area to be treated is deter-mined, check the recommendation on the label to calculate how much herbicide is needed. Use the following examples to determine how to calculate herbicide requirements. In these examples, the lawn is divided into three rectangular sections of a) 20 ft. X 100 ft., b) 50 ft. X 20 ft. and c) 50 ft. X 35 ft. Lawn area is determined to be 2,000, 1,000 and 1,750 square feet, respectively.Example 1. Calculate use of dry formulations (granules) of herbicides or dry weed and feed mixtures: The product label recommends applying 3 pounds on each 1,000 square feet of lawn.•	 Divide the actual area to be treated by 1,000 to determine the relative area.•	 Multiply the relative area by the recommended label rate (i.e., 3 lbs. per 1,000 sq. ft.).Use an accurate scale to weigh out each amount, then spread it evenly over each separate area. The material must be spread uniformly. Apply one-REMINDER — Before mixing or spraying any herbicide READ THE LABEL, obtain any personal protective equipment (PPE) required, and wear the PPE during the application.Water after application: The amount and intensity of rainfall or irrigation after a herbicide applica-tion is important in preventing runoff. Runoff from the first heavy rainfall after application can carry the herbi-cide directly into storm drains empty-ing into lakes, rivers or streams. Watch the weather. Postemergence herbicide applications should be made at least 24 hours before a rain or irrigation. A slow, gentle ½ inch rainfall after ap-plication of a preemergence herbicide is ideal if all the rain water soaks into the soil without forming puddles. If A ready-to-spray herbicide is excellent for spot treatments.WARNING — Any container or measuring utensil used to measure and/or mix herbicides must not be used for any other purpose.Dry spreaders or sprayers can be used to apply herbicides.Table 1. Dry formulations.Area to be treatedRelativeareaRelative area Xlabel rate2,000 2 6 lbs. 1,000 1 3 lbs.1,750 1.75 5.35 lbs.Table 2. Liquid formulations mixed with water.Area to be treatedRelative areaHerbicide Spray WaterRelative area Xlabel rate(X 2 oz./1,000 sq. ft.)Relative area Xlabeled gallons(X 1 gal./1,000 sq. ft.)2,000 2 4 oz. 2 gallons1,000 1 2 oz. 1 gallon1,750 1.75 3.5 oz. 1.75 gallonsThere are 4 quarts, 8 pints or 16 cups in a gallon. There are 2 tablespoons or 6 teaspoons in an ounce.half of the material with a granular applicator moving one direction over the area. Then spread the other half across the same area, moving at right angles to the first pass. After applying a granular material, use a slow sprinkler irrigation over the treated area to acti-vate the herbicide. Note that although a large amount of material is weighed, there is very little active ingredient present. The high level of inert ingredi-ent makes it easier to spread the mate-rial uniformly.Example 2. Calculate use of liquid formulations mixed with water and sprayed: Postemergence herbicides usually are formulated as liquids. A product that contains 2 pounds active ingredient per gallon might be labeled to apply 2 fluid ounces mixed in 1 gal-lon of water per 1,000 square feet.•	 Divide the actual area to be treated by 1,000 to determine the relative area.•	 Multiply the relative area by the label recommended rate per 1,000 sq. ft. (i.e., 2 fl. oz.). •	 Multiply relative area by gallons of water per 1,000 sq. ft. (i.e., 1 gallon per 1,000 sq. ft.).If recommended on the herbicide label, mix 1 to 3 teaspoons of sur-factant with each gallon of water to ensure that the herbicide is taken in by the weed. However, be aware that adding surfactant can also increase the chance of damage to the turfgrass. A surfactant, similar to liquid dish soap, causes water to spread over the leaf surface and softens the wax coating, enabling the weed to take in the herbi-cide more readily. Apply the mixture uniformly with a well maintained sprayer to the premeasured area. Prac-tice the application with clean water before applying the herbicide mix.There are many application devices used to apply herbicides. Refer to specific application instructions on the herbicide product or on the applicator itself to ensure thor-ough and uniform cover-age. Most ap-plication errors are caused by not cali-brating equipment. For additional information, refer to Extension publications that discuss calibration of specific application de-vices (Sprayer Calibration for Turfgrass, L-5331, and Spreader Calibration for Turfgrass, L-5330). Contact the area Extension turf specialists, Texas A&M University Department of Soil and Crop Science’s Web site at http://soil-testing.tamu. edu or the county offices of the Texas AgriLife Extension Service.The USER is always responsible for the effects of pesticide residues, as well as for problems that could arise from drift or movement of the pesticides from his property to that of others. Always read and follow carefully the instructions on the product label.Produced by AgriLife Communications and Marketing, Texas A&M SystemExtension publications can be found on the Web at: http://AgriLifeBookstore.orgVisit the Texas AgriLife Extension Service at http://AgriLifeExtension.tamu.eduEducational programs of the Texas AgriLife Extension Service are open to all people without regard to race, color, sex, disability, religion, age, or national origin.Issued in furtherance of Cooperative Extension Work in Agriculture and Home Economics, Acts of Congress of May 8, 1914, as amended, and June 30, 1914, in cooperation with the United States Department of Agriculture. Edward G. Smith, Director, Texas AgriLife Extension Service, Texas A&M System.4M, ReprintThis publication was produced by the Texas AgriLife Extension Service in cooperation with the Texas Department of Agriculture, USDA-Natural Resources Conservation Service, Texas State Soil and Water Conservation Board, and Texas Natural Resource and Conservation Commission.

Protecting the Environment Using Integrated Weed Management in Lawns

Texas A&M University

T here are more than 2 million acres of lawns in Texas and nearly 1.9 million acres of 
maintained turf in parks, golf courses 
and other public places. To control 
weeds in lawns, approximately 50 per-
cent of homeowners use herbicides.  
The use of herbicides increases as 
the public use of an area increases. An 
average of 59 percent of all turf areas 
are treated with some amount of weed 
control chemical. As much as 87 per-
cent of school yard and turf areas and 
97 percent of golf courses are treated 
with herbicides. 
Herbicides are tools used to create 
beautiful landscapes. Herbicide use 
on lawns and ornamental plants keeps 
them free of weeds, creates an aes-
thetically pleasing area and maximizes 
plant growth. These tools, however, 
should be used in a balanced pest 
management program.
Herbicides, used unwisely or 
indiscriminately, add to environmental 
pollution. Herbicides will leach and/
or runoff, especially if overwatering 
or excessive rainfall immediately fol-
lows application. Surface water can 
become contaminated with turfgrass 
Protecting the Environment
Using Integrated Weed Management in Lawns
Mary L. Ketchersid and Paul A. Baumann*
herbicides that are easily dissolved 
in water and used near hard surfaces 
such as streets, sidewalks, parking lots 
and driveways. Because excess water 
cannot soak into the ground, it accu-
mulates and rushes into storm sewers 
and waterways as runoff. Storm drains, 
common in urban areas, carry water 
directly to the nearest stream. The 
water does not go through any treat-
ment process. 
To reduce the risk of surface and 
groundwater contamination, herbicide 
users should follow the principles of 
Integrated Pest Management (IPM) 
for weed control. The goal of IPM is to 
decrease dependence on chemicals by 
increasing the use of cultural, mechan-
ical and biological control measures. 
IPM measures enable the turfgrass 
manager or homeowner to maintain 
vigorous, attractive turf, to protect 
the soil, and to preserve the purity of 
ground and surface water. 
How can IPM help?
It is the responsibility of every 
herbicide user, whether an agricultural 
producer or urban home- owner, to 
prevent water pollution by herbicides. 
There are many things that homeown-
ers can do to prevent pollution. Begin 
with maintaining a thick, healthy lawn 
that prevents erosion and weed inva-
sion. This practice also helps moderate 
summer heat, improves soil structure, 
and increases water infiltration while 
adding organic matter to the soil. 
Organic matter in the soil helps hold 
nutrients and herbicides near the soil 
surface where they are most effective. 
A healthy, vigorous stand of grass can 
outcompete most weeds, and also 
tolerates some damage from fungi and 
insects.
Integrated Pest (Weed) Manage-
ment measures include a number of 
common sense, practical approaches 
to achieve economical and effective 
weed control with the least risk to the 
environment. By balancing the use of 
herbicides with other control tactics, 
IPM programs reduce reliance on 
herbicides. The best IPM measure to 
prevent groundwater contamination 
and to reduce runoff in urban areas 
is to maintain a dense, healthy turf. 
To accomplish this, the following 
turfgrass management practices are 
recommended.
*Extension Program Specialist and Professor 
and Extension Weed Specialist, The Texas A&M 
University System.
L-5324
3/08
REMINDER — Be water friendly 
and earth smart by reducing the 
potential for herbicide runoff in 
urban areas.
Use prevention techniques: When 
purchasing lawn seed, buy seed that is 
free of weed seed as indicated on the 
label. When installing turfgrass sod, 
do not purchase sod that has weeds or 
other undesirable turf species growing 
in it. When buying topsoil to spread 
prior to lawn establishment or for 
leveling purposes in established lawns, 
receive assurance from the supplier 
that the soil is relatively free of weed 
seed and nutsedge tubers. 
Plant adapted turfgrass variet-
ies: Plant the best adapted variety and 
type of turfgrass for the area. Mow 
established turfgrasses at heights and 
frequencies recommended for the 
variety to increase turf density and 
vigor and to reduce weed and disease 
problems. This also helps keep herbi-
cide-treated soil in place and increases 
water infiltration.
Follow recommended fertility 
practices: Moderate fertilization based 
on grass species, environmental condi-
tions, mowing practices and turf use 
is critical. Both too much or too little 
fertility weakens the turf and allows 
weeds, diseases and insects to move 
in. Use a good slow-release fertilizer or 
organic program to keep the fertility 
level uniform. To determine fertiliza-
tion requirements, a good soil test is 
needed. Contact the county Extension 
office for proper soil test sampling 
procedures. Samples can be submitted 
to the Soil, Water, and Forage Testing 
Laboratory at Texas A&M University 
or another soil testing laboratory. 
Conserve water: Watering prac-
tices have a significant impact on weed 
populations and pest activity. Infre-
quent deep watering encourages the 
development of a strong, deep root 
system and stronger turf. Excessive 
watering can result in runoff of herbi-
cides in surface water.
Aerate the soil: Aeration of the turf 
helps water penetrate to the proper 
depth and helps encourage a deep root 
system. Aeration can be done with 
mechanical or manual tools. Aeration 
also promotes beneficial soil micro-
bial activity, which in turn builds a 
healthier growing medium for the turf. 
Aeration and cultural practices such 
as vertical mowing and top-dressing 
help decrease thatch buildup. Thatch 
accumulation can increase insect and 
disease activity and reduce pesticide 
effectiveness. Aeration encourages 
herbicide infiltration with rainfall or 
irrigation water into the soil profile.
Manage insects and disease: 
Insects and diseases create weakened 
stands of turf and can cause death over 
large areas. This weakened and open 
condition invites weed germination 
and growth and also creates a situation 
where herbicide runoff can occur.
Employ mechanical measures: 
This includes some of the most com-
mon weed control activities such as 
mowing, hand pulling, hoeing and 
tilling. In extreme situations, whole 
sections of the lawn might need to be 
removed and resodded. Extensive soil 
conditioning is then possible before 
resodding. Basic, nonchemical ap-
proaches such as these have an obvi-
ous effect on reducing herbicides in 
the environment.
Spot treat with herbicides: Chemi-
cal treatment might be required if 
weeds reach a critical population. Use 
the least amount of herbicide over 
the smallest area that will effectively 
control the problem. Many herbicides 
available at lawn and garden stores are 
in ready-to-spray formulations. Read 
the labels carefully; the herbicide 
might be selective and only control 
broadleaf or grass weeds or it might 
be nonselective and kill what-ever it 
contacts. A spot treatment will mini-
mize the amount of product used and 
reduce the risk of runoff.
What are some 
considerations when 
using herbicides?
If the use of a herbicide on a broad-
cast basis is necessary, there are many 
points to consider.
Choose the correct herbicide: Is a 
herbicide application really needed? 
Is the weed problem likely to persist 
and cause more problems or will it 
die out after a short time? Should a 
preemergence (preventative) weed 
treatment be used or should herbi-
cides be applied after a weed problem 
develops? Consider the answers to 
these questions before choosing a her-
bicide. Also, consider what weeds have 
been present in the past, study recom-
mendation books and labels, and seek 
advice from an expert in the field. 
Apply it properly: Herbicides often 
are overapplied in urban areas because 
the actual amount needed was not cal-
culated or the application equipment 
was not calibrated. Over-application 
A soil test helps determine fertilization requirements.
can cause damage 
to trees and other 
desirable plants. 
Always read and fol-
low label instructions before applying 
any pesticide. Read the label carefully, 
making sure that all directions and 
warnings are understood before use, 
and then follow all label directions. 
Rinse empty herbicide containers at 
least three times and put the rinsate 
back into the spray solution. Do not 
use a herbicide unless it is registered 
for use on the specific type of turf-
grass. 
Be sure application equipment 
is properly calibrated and in good 
working condition before use. Do not 
mix or apply more than the amount 
needed. If possible, leave an untreated 
strip next to curbs, driveways, and 
sidewalks and use other weed control  
methods in these areas. This will keep 
the herbicide away from areas prone 
to runoff. Do not apply a preemer-
gence herbicide when heavy rains that 
might cause runoff are forecast. Also, 
do not apply postemergence materials 
in windy conditions that would cause 
them to drift onto sensitive plants or 
sensitive runoff areas.
no rain is in the 
forecast, water 
the treated area 
with ½ inch of 
slow sprinkler 
irrigation to 
dis-solve the 
herbicide and 
move it into 
the soil profile. 
Normal wet-
ting and drying 
cycles generally 
will keep the herbicide in the top 1 to 
6 inches of the soil profile. Never ap-
ply water to the point of runoff. Water 
as infrequently as possible, but try to 
wet the soil to a depth of 4 to 6 inches 
when water is applied. To check on 
the amount applied, collect water in a 
pie pan or rain gauge placed within the 
area being watered. It takes approxi-
mately ½ to 1 inch of applied water to 
wet the soil 4 to 6 inches deep, de-
pending on the soil texture. 
Clean up property and equipment: 
Do not apply or spill the herbicide ma-
terial on the driveway, sidewalk, curb 
or street. If a dry herbicide formula-
tion is spilled, sweep it up immedi-
ately. If a liquid herbicide formulation 
is spilled, first absorb it with soil, pet 
litter or other inert absorbent then 
sweep it up and dispose at an appro-
priate site. Do not wash spills into the 
streets and storm drains. 
Following an application, it is 
important to properly clean the 
equipment. Equipment rinse water 
can be sprayed over the area just 
treated. Never empty residues onto 
bare ground. This will concentrate 
the herbicide in the soil. Never pour 
rinsate, unused herbicide concentrate, 
or mixtures into storm drains, sewers, 
onto the driveway or down the sink. 
This can contaminate water supplies. 
Dispose of leftover concentrate and 
containers according to state and local 
regulations or at household hazardous 
waste collection sites. 
Are calculations and 
calibration necessary? 
Yes, they are absolutely necessary! 
Begin by determining the area to be 
treated. Use a tape measure and mea-
sure the length and width of the lawn 
to determine the area in square feet. 
If the lawn is irregular, sketch it out 
and divide it into smaller blocks. After 
the area to be treated is deter-mined, 
check the recommendation on the 
label to calculate how much herbicide 
is needed. 
Use the following examples to 
determine how to calculate herbicide 
requirements. In these examples, the 
lawn is divided into three rectangular 
sections of a) 20 ft. X 100 ft., b) 50 ft. 
X 20 ft. and c) 50 ft. X 35 ft. Lawn area 
is determined to be 2,000, 1,000 and 
1,750 square feet, respectively.
Example 1. Calculate use of dry 
formulations (granules) of herbicides 
or dry weed and feed mixtures: The 
product label recommends applying 
3 pounds on each 1,000 square feet of 
lawn.
•	 Divide the actual area to be 
treated by 1,000 to determine 
the relative area.
•	 Multiply the relative area by the 
recommended label rate (i.e., 3 
lbs. per 1,000 sq. ft.).
Use an accurate scale to weigh out 
each amount, then spread it evenly 
over each separate area. The material 
must be spread uniformly. Apply one-
REMINDER — Before mixing 
or spraying any herbicide READ 
THE LABEL, obtain any personal 
protective equipment (PPE) 
required, and wear the PPE during 
the application.
Water after application: The 
amount and intensity of rainfall or 
irrigation after a herbicide applica-
tion is important in preventing runoff. 
Runoff from the first heavy rainfall 
after application can carry the herbi-
cide directly into storm drains empty-
ing into lakes, rivers or streams. Watch 
the weather. Postemergence herbicide 
applications should be made at least 
24 hours before a rain or irrigation. A 
slow, gentle ½ inch rainfall after ap-
plication of a preemergence herbicide 
is ideal if all the rain water soaks into 
the soil without forming puddles. If 
A ready-to-spray herbicide is 
excellent for spot treatments.
WARNING — Any container or 
measuring utensil used to measure 
and/or mix herbicides must not be 
used for any other purpose.
Dry spreaders or sprayers can 
be used to apply herbicides.
Table 1. Dry formulations.
Area 
to be 
treated
Relative
area
Relative area X
label rate
2,000 2 6 lbs. 
1,000 1 3 lbs.
1,750 1.75 5.35 lbs.
Table 2. Liquid formulations mixed with water.
Area to 
be treated
Relative 
area
Herbicide Spray Water
Relative area X
label rate
(X 2 oz./1,000 sq. ft.)
Relative area X
labeled gallons
(X 1 gal./1,000 sq. ft.)
2,000 2 4 oz. 2 gallons
1,000 1 2 oz. 1 gallon
1,750 1.75 3.5 oz. 1.75 gallons
There are 4 quarts, 8 pints or 16 cups in a gallon. There are 2 tablespoons or 6 teaspoons in an ounce.half of the material with a granular 
applicator moving one direction over 
the area. Then spread the other half 
across the same area, moving at right 
angles to the first pass. After applying a 
granular material, use a slow sprinkler 
irrigation over the treated area to acti-
vate the herbicide. Note that although 
a large amount of material is weighed, 
there is very little active ingredient 
present. The high level of inert ingredi-
ent makes it easier to spread the mate-
rial uniformly.
Example 2. Calculate use of liquid 
formulations mixed with water and 
sprayed: Postemergence herbicides 
usually are formulated as liquids. A 
product that contains 2 pounds active 
ingredient per gallon might be labeled 
to apply 2 fluid ounces mixed in 1 gal-
lon of water per 1,000 square feet.
•	 Divide the actual area to be 
treated by 1,000 to determine 
the relative area.
•	 Multiply the relative area by the 
label recommended rate per 
1,000 sq. ft. (i.e., 2 fl. oz.). 
•	 Multiply relative area by gallons 
of water per 1,000 sq. ft. (i.e., 1 
gallon per 1,000 sq. ft.).
If recommended on the herbicide 
label, mix 1 to 3 teaspoons of sur-
factant with each gallon of water to 
ensure that the herbicide is taken in 
by the weed. However, be aware that 
adding surfactant can also increase the 
chance of damage to the turfgrass. A 
surfactant, similar to liquid dish soap, 
causes water to spread over the leaf 
surface and softens the wax coating, 
enabling the weed to take in the herbi-
cide more readily. Apply the mixture 
uniformly with a well maintained 
sprayer to the premeasured area. Prac-
tice the application with clean water 
before applying the herbicide mix.
There are many application devices 
used to apply herbicides. Refer to 
specific application 
instructions on the 
herbicide product 
or on the applicator 
itself to ensure thor-
ough and uniform 
cover-age. Most ap-
plication errors are 
caused by not cali-
brating equipment. 
For additional information, refer to 
Extension publications that discuss 
calibration of specific application de-
vices (Sprayer Calibration for Turfgrass, 
L-5331, and Spreader Calibration for 
Turfgrass, L-5330). Contact the area 
Extension turf specialists, Texas A&M 
University Department of Soil and 
Crop Science’s Web site at http://
soil-testing.tamu. edu or the county 
offices of the Texas AgriLife Extension 
Service.
The USER is always responsible for the effects of pesticide residues, as well as for problems that could arise from drift or movement 
of the pesticides from his property to that of others. Always read and follow carefully the instructions on the product label.
Produced by AgriLife Communications and Marketing, Texas A&M System
Extension publications can be found on the Web at: http://AgriLifeBookstore.org
Visit the Texas AgriLife Extension Service at http://AgriLifeExtension.tamu.edu
Educational programs of the Texas AgriLife Extension Service are open to all people without regard to race, color, sex, disability, religion, age, or national origin.
Issued in furtherance of Cooperative Extension Work in Agriculture and Home Economics, Acts of Congress of May 8, 1914, as amended, and June 30, 1914, in cooperation with the United 
States Department of Agriculture. Edward G. Smith, Director, Texas AgriLife Extension Service, Texas A&M System.
4M, Reprint
This publication was produced by the Texas AgriLife Extension Service in cooperation with the Texas Department of Agriculture, USDA-Natural Resources 
Conservation Service, Texas State Soil and Water Conservation Board, and Texas Natural Resource and Conservation Commission.


https://oaktrust.library.tamu.edu/bitstream/1969.1/86814/1/pdf_1078.pdf

Protecting the Environment Using Integrated Weed Management in Lawns

Abstract

Similar works

Full text

Available Versions

Texas A&M Repository

Texas A&M University

Protecting the Environment Using Integrated Weed Management in Lawns

Abstract

Similar works

Full text

Available Versions

Texas A&amp;M Repository

Texas A&M University

Texas A&M Repository