Dewaele, S.

Muchez, Philippe

English

Dewaele S.

Muchez Philippe

University of Szeged

Acta Mineralogica-Petrographica, Abstract Series 2, Szeged, 2003 FLUID EVOLUTION THROUGH TIME ALONG A SHEARZONE: AN EXAMPLE FROM THE LOWER PALAEOZOIC ANGLO-BRABANT FOLD BELT, BELGIUM DEWAELE. S.'. MUCHEZ, Ph.1 1 Fysico-chemische Geologie, K.U.Leuven, celestijnenlaan 200C, B-3001 Heverlee, Belgium. E-mail: stijn.dewaele@geo.kuleuven.ac.be Introduction A polysulphide mineralised shear zone occurs at the southern margin of the Anglo-Brabant Fold belt (Figure 1). The study area consists of Lower Palaeozoic greenschist metamorphosed turbidite deposits, i.e. siltstones and slates, interstratified with few volcanic rocks (De Vos et al., 1993). The mineralisation consists of quartz veins with minor amounts of sulphides, carbonates, chlorite and is associated with an envelope of extensive alteration. By 40Ar-39Ar dating, the main period of hydrothermal circulation, resulting in the alteration and mineralisation, has been established to be ~ 416 myrs ago (Dewaele et al. submitted). The shear zone identified forms part of a larger deformation zone at the southern margin of the Anglo-Brabant Fold belt, the Nieuwpoort-Asquempont fault zone, which has been tectonically active during later periods. A fluid inclusion study has been carried out on vein quartz and carbonates, sampled at regular distances in a borehole transecting the shear zone. The aim of this study is to characterise the fluid types that have circulated through the shear zone. Figure 1. Geological map of the Anglo-Brabant Fold Belt, Belgium (after Devos et al, 1993). Marcq area is indicated by circle. Fluid Inclusions paragenesis Primary inclusions in the mesothermal quartz veins formed parallel to crystal boundaries. Secondary inclusions occur in trails towards the mineralisation or in recrystalised zones around sulphide grains. Croscutting trails are the last generation in the quartz. The secondary inclusions in trails and in the recrystallised zones in quartz around sulphide grains, are clearly related to the polysulphide mineralisation (Dewaele et al., 2001). Carbonate precipitation clearly postdates vein quartz. Two generations of carbonates can be recognised, after staining with a potassium hexacyanoferate and Alizarin Red S solution. The iron-rich dolomite clearly formed before iron-rich calcite. The dolomite shows some minor twinning. The younger iron-rich calcites contain no indication of deformation. Fluid types 1. Pre-mineralisation fluid inclusions The inclusions show two phases (L+V) at room temperature, with a gas volume of 5-20 % and a size smaller than 10 /im. They have an H20-C02-CH4-NaCl-KCl composition. The melting of C 0 2 (Tmco2) is not measurable, due to the small size of the inclusions and since the formation of clathrate consumed the majority of C0 2 . Raman analysis indicate the presence of CH4 in addition to C0 2 . The amount of CFL» in the gas phase is very consistent, - 30%. The first melting of ice occurs at temperatures around -22.9°C. The final melting of ice (Tmice) takes place between -11.9°C and -5.5°C. The dissociation of clathrate (Tn\iath) occurs between 5.6°C and 10.5°C. Homogenisation temperatures vary between 189°C and 258°C (with an average of 240°C). Fluid salinities, calculated with ICE (Bakker, 1997), varies between 12 and 14 eq. wt% NaCl. 2. Fluid inclusions associated with the sulphide mineralisation The inclusions investigated are two phase (L+V) at room temperature with a gas volume of 10-50 % and a size varying between 10 and 50 ftm. They belong to the H20-C02-CH4-NaCl-KCl (Dewaele et al. 2001). The melting of C 0 2 (Tmco2) is measurable in a limited number of inclusions and the values vary between -65.9°C and -56.6°C. Raman analysis shows that the amount of CHi varies between 30% and 100%. The first melting of ice also occurs at temperatures around -22.9°C. The Tmice is between -15.3°C and -5.5°C. The dissociation of clathrate (Tm^th) occurs between -2°C and 14.8°C. Homogenisation of the 50 Acta Mineralogica-Petrographica, Abstract Series 2, Szeged, 2003 fluid inclusions occurs between 262°C and 305°C with an average of 290°C. Fluid salinities, calculated with ICE (Bakker, 1997), are between 6 and 18 eq. wt% NaCl. 3. Post-mineralisation fluids In quartz a distinction can be made between two types of aqueous fluids: an H20-NaCl-KCl and an H20-NaCl-CaCl2 fluid. The former inclusions show two phases (L+V) at room temperature with a gas volume of 5-10 % and a size up to 25 ftm. The first melting of ice often occurs around -22.9°C. A range between -1.8°C and -4.9°C of the melting temperatures of ice (Tm ice) can be observed. The inclusions homogenise between 160 and 200 °C. Fluid salinities, calculated with Flincor (Brown, 1989), are between 1.8 and 8.3 eq. wt% NaCl. The H20-NaCl-KCl type fluid inclusions are also present in the ferroan dolomites, confirming their post-mineralisation origin. In the dolomites, the final melting of ice takes place between -10.9°C and -6.5°C. The inclusions homogenise around 220°C. The calculated salinities vary between 10.7 and 15.2 eq. wt % NaCl. The inclusions, belonging to the H20-NaCl-CaCl2 system, show two phases (L+V) at room temperature with a gas volume of 5 % and can be larger than 40 fim. The first melting seems to occur at a temperature < -50°C. Tm ice occurs between -15.3 °C and -10.6°C. Th is between 133°C and 150°C. Fluid salinities in the H 20-NaCl system, calculated with Flincor (Brown, 1989), are between 16.6 and 22.2 eq. wt% NaCl. This fluid type is also recognised in the iron-rich calcites. In the calcites, Tm ice is between -7°C and -6.3°C. Inclusions have a homogenisation temperature between 189 and 225 °C. The calculated salinities are between 10.2 and 11.2 eq. wt% NaCl. Discussion and conclusion Different types of fluids can be recognised in the quartz-carbonate veins in the shear zone in the Lower Palaeozoic of the Anglo-Brabant Fold Belt in Belgium. The earliest fluids in quartz have an H20-C02-CH4-NaCl-KCl composition. This fluid type is interpreted as metamorphic, released during the main deformation event in the Anglo-Brabant Fold belt (Piessens et al., 2002), and is responsible for the local formation of polysulphide mineralisation. The quartz veins in the shear zone formed the migration pathway for later fluids. Firstly, fluids with an H 20-NaCl-KCl composition circulated through the fractures. These fluids were recognised both in quartz and in iron-rich dolomite. A comparable fluid has been recognised at the Variscan deformation front, south of the study area (Muchez et al., 1998). This fluid has been considered as released during the late stages of metamorphism (Darimont, 1986). The youngest fluid generation identified has an H20-NaCl-CaCl2 composition. Fluids with a similar composition, salinity and homogenisation temperature have been identified throughout the Variscan belt (Muchez et al., 1998). These fluids are thought to be responsible for the development of the Mesozoic Mississippi Valley-type Zn-Pb mineralisation in southern and eastern Belgium (Muchez et al., 1994). The H20-NaCl-CaCl2 fluid in the iron-rich calcite has a lower salinity and higher average homogenisation temperature. However, fluids with a similar composition and salinity have also been described from Mesozoic calcite veins in Upper Palaeozoic rocks at the Variscan thrust front (Muchez et al., 1997). References BAKKER, R. J. (1997): Clathrates: computer programs to calculate fluid inclusion V-X properties using clathrate melting temperatures. Computers & Geosciences, 23, 1-18 BROWN, E. B. (1989): FLINCOR: a microscopic program for the reduction and investigation of fluid inclusions data. American Mineralogist, 74, 1390-1393. DARIMONT, A. (1986): Les inclusions fluides de quartz filoniens d'Ardenne. Annates de la Societé Géologique de la Belgique, 109,587-601. DE VOS, W., VERNIERS, J., HERBOSCH, A., VANGUESTAINE, M. (1993): A new geological map of the Brabant Massif, Belgium. Geological Magazine, 130, 605-611. DEWAELE, S., MUCHEZ, PH., PIESSENS, K., VANDEGINSTE, V., BURKE, E. A. J. (2001): P-T-X variation along a polysulphide mineralized low-angle shear zone in the Lower Palaeozoic Anglo-Brabant Fold belt (Belgium). In: Piestrzynski et al. (eds) Mineral deposits at the beginning of the 21st Century. A. A. Balkema, 727-731. DEWAELE, S., BOVEN, A, MUCHEZ, PH. (submitted). 40Ar/39Ar dating of a mesothermal orogenic low-angle reverse shear zone in the Lower Palaeozoic of the Anglo-Brabant fold belt, Belgium. Transactions of Institution of Mining and Metallurgy. (Section B: Applied Earth Sciences) MUCHEZ, PH., SLOBODNIK, M., VIAENE, W., KEPPENS, E. (1994): Mississippi Valley-type Pb-Zn mineralization in eastern Belgium: indications for gravity-driven flow. Geology, 22, 1011-1014.. MUCHEZ, PH., SLOBODNIK, M. , S I N T U B I N , M. , VIAENE, W. , KEPPENS, E. (1997): Origin and migrat ion of pa laeof lu ids in the Lower Carboniferous of southern and eastern Belgium. Zbl. Geol. Palaont. Teil I, HI 1/12,1107-1112. MUCHEZ, PH., ZHANG, Y., DEJONGHE, L., VIAENE, W., KEPPENS, E. (1998): Evolut ion of palaeof luids at the Var iscan thrust front in Eastern Belgium. Geol. Rundsch, 87, 373-380. PIESSENS, K . , MUCHEZ, PH. , DEWAELE, S. , BOYCE, A. , D E VOS, W . , SINTUBIN, M . , DEBACKER, T . , BURKE, E . A . J . , VIAENE, W . (2002): Fluid flow, alteration, and polysulphide mineralisation associated with a low-angle reverse shear zone in the Lower Palaeozoic of the Anglo-Brabant Fold belt, Belgium. Tectonophysics, 34, 73-92. 51 

Fluid evolution through time along a shearzone : an example from the lower paleozoic Anglo-Brabant Fold Belt, Belgium

http://acta.bibl.u-szeged.hu/31449/1/mineralogica_as_002_050-051.pdf

Fluid evolution through time along a shearzone: : An example from the lower paleozoic Anglo-Brabant Fold Belt, Belgium

Abstract

Similar works

Full text

Available Versions

University of Szeged