Cu nanoparticles were incorporated on different porous silica supports (commercial silica, SBA-15 synthesized
both at room temperature and under hydrothermal conditions, and mesocellular foam) by the strong electrostatic
adsorption method and tested in the gas-phase furfural hydrogenation for the production of furfuryl alcohol and
2-methylfuran, being the latter a promising biofuel. The incorporated copper species provided metal particle
sizes lower than 5 nm in all cases. However, different catalytic behaviors, both in terms of conversion and
selectivity, were detected due to the morphology and textural properties of each support. Cu over commercial
silica was more prone to suffer from deactivation, and it provided higher furfuryl alcohol yields, probably due to
its higher acidity and lower metallic surface area. On the other hand, the agglomeration of Cu nanoparticles
together with larger pore sizes complicated the access of furfural to the active sites using the hydrothermal SBA-
15 support, thus decreasing the activity. In contrast, the addition of fluoride in the synthesis of mesoporous silica,
which shortened the length of the silica channels (mesocellular foam), facilitated the furfural access and provided
both higher metallic surface area and lower acidity. This fact led to a more gradual deactivation, still attaining
high values of furfural conversion and 2-methylfuran yield (95 and 76%, respectively) after 5 h at 190 ◦C.
However, Cu over mesocellular foam changed its selectivity pattern along 48 h and after regeneration, increasing
the furfuryl alcohol selectivity due to the decreased number of available active sites