Fatty acid methyl esters (FAME) produced from vegetable oil by transesterification, labeled as ‘‘Biodiesel”, is industrially accomplished in the presence of a homogeneous basic catalyst, such as alkali hydroxide or methoxide dissolved in methanol. This process requires a large excess of methanol (methanol:oil molar ratio> 6), temperature around 60 ºC and 1-2 h of reaction. However, this process suffers from important drawbacks: low FFA and water tolerance, generation of process wastewater, etc. To overcome them, different approaches have been proposed: such as the use of heterogeneous catalysis, CO2 under supercritical conditions or enzymes; coupled to microwave and ultrasonics systems as an alternative to conventional heating. Among all the researches, heterogeneous catalysts show potential in the transesterification reaction. Unlike homogeneous catalysts, heterogeneous ones are environmentally benign and can be reused and regenerated. Nevertheless, higher catalyst loading and alcohol:oil molar ratio are required for biodiesel production in the presence of solid catalysts.
A new mechanochemical reactor is used for the transesterification reaction to promotes the reactants mixing, minimizing mass transfer limitations associated to the inmiscibility of reactants. This solution allows to reduce the methanol need to an amount close to the stoichiometry (methanol:oil molar ratio= 4:1), and at room temperature after less than one minute, more than 90 wt% FAME is reached. Glycerol, obtained as by-product in the transesterification reaction is used to prepare calcium diglyceroxide by mechanosynthesis, and is used as heterogeneous catalyst. A new and more efficient mechanochemical synthesis of FAME is proposed, with shorter reaction and lower temperature, compared to other synthesis proposed in literature.Universidad de Málaga.Campus de Excelencia Internacional Andalucía Tec
