Solar energy technologies such as photovoltaics, solar thermal power plants, passive solar heating/cooling systems and day lighting in buildings are expected to continue their very rapid growth. In this context the availability of reliable solar radiation data is of high economic value both for planning and operating these systems.



HELIOSAT-3 aims the quantification of surface solar irradiance in cloud free and cloudy situations and additional energy-specific parameters as direct normal and diffuse irradiance over Europe and Africa using the enhanced capabilities of MSG. Emphasis is laid on clouds, water vapor, aerosols and ozone and their influence on surface solar irradiance. 



Several projects as e.g. the HELIOSAT-3 and PVSAT-2 European Commission FP5 and the ENVISOLAR (ESA Earth Observation Market Development Program) projects made profit from the data access and additional MSG product information obtained through the RAO program. The paper focuses on results obtained during the RAO project based on funding in HELIOSAT-3, PVSAT-2 and ENVISOLAR projects

Betcke, Jethro

Breitkreuz, Hanne-Katarin

Hammer, Annette

Heinemann, Detlev

Heinicke, Susanne

Holzer-Popp, Thomas

Lorenz, Elke

Petrak, Sibylle

Schroedter-Homscheidt, Marion

Wald, Lucien

English

International audienceSolar energy technologies such as photovoltaics, solar thermal power plants, passive solar heating/cooling systems and day lighting in buildings are expected to continue their very rapid growth. In this context the availability of reliable solar radiation data is of high economic value both for planning and operating these systems. HELIOSAT-3 aims the quantification of surface solar irradiance in cloud free and cloudy situations and additional energy-specific parameters as direct normal and diffuse irradiance over Europe and Africa using the enhanced capabilities of MSG. Emphasis is laid on clouds, water vapor, aerosols and ozone and their influence on surface solar irradiance. Several projects as e.g. the HELIOSAT-3 and PVSAT-2 European Commission FP5 and the ENVISOLAR (ESA Earth Observation Market Development Program) projects made profit from the data access and additional MSG product information obtained through the RAO program. The paper focuses on results obtained during the RAO project based on funding in HELIOSAT-3, PVSAT-2 and ENVISOLAR projects

Schroedter Homscheidt, Marion

Breitkreuz, Hanne

Heinnemann, Detlev

Petrack, Sybille

HAL-MINES ParisTech

Energy-specific solar radiation data from MSG: The Heliosat-3 project

Institute of Transport Research:Publications

ENERGY-SPECIFIC SOLAR RADIATION DATA FROM MSG:  THE HELIOSAT-3 PROJECT  Marion Schroedter-Homscheidt, Jethro Betcke1, Hanne Breitkreuz, Annette Hammer1, Detlev Heinemann1, Susanne Heinicke1, Elke Lorenz1, Sibylle Petrak1, Thomas Holzer-Popp, Lucien Wald2  Deutsches Zentrum für Luft- und Raumfahrt e.V. (DLR) Deutsches Fernerkundungsdatenzentrum (DFD) Oberpfaffenhofen, D-82234 Weßling, Germany phone: ++49-8153-28-2896, fax ++49-8153-28-1445 e-mail: Marion.Schroedter-Homscheidt@dlr.de 1 Universität Oldenburg, Abteilung Energie- und Halbleiterforschung    2 Armines / Ecole des Mines de Paris   ABSTRACT  Solar energy technologies such as photovoltaics, solar thermal power plants, passive solar heating/cooling systems and day lighting in buildings are expected to continue their very rapid growth. In this context the availability of reliable solar radiation data is of high economic value both for planning and operating these systems.  HELIOSAT-3 aims the quantification of surface solar irradiance in cloud free and cloudy situations and additional energy-specific parameters as direct normal and diffuse irradiance over Europe and Africa using the enhanced capabilities of MSG. Emphasis is laid on clouds, water vapor, aerosols and ozone and their influence on surface solar irradiance.   Several projects as e.g. the HELIOSAT-3 and PVSAT-2 European Commission FP5 and the ENVISOLAR (ESA Earth Observation Market Development Program) projects made profit from the data access and additional MSG product information obtained through the RAO program. The paper focuses on results obtained during the RAO project based on funding in HELIOSAT-3, PVSAT-2 and ENVISOLAR projects.    INTRODUCTION The Heliosat method [1, 2] was developed for Meteosat First Generation to calculate surface solar irradiance from measurements in the visible channel. It is supposed that the sunlight reflected by clouds is inversely related to the sunlight transmitted by them. The scheme takes the variability of the cloud field and its impact on hourly global and diffuse irradiance into account. Together with a sophisticated model of clear sky irradiance [3] this method gives reliable results for Europe for most of the year.  Potential for improvement is expected in winter time especially in snow covered areas, during morning and evening hours due to three-dimensional effects of clouds to be described with cloud physical parameters and in the clear sky case using more detailed input information on aerosols and water vapor. Therefore, a new scheme called Heliosat-3 was developed in the MSG-RAO and EU FP5 programs (Fig. 1).   Figure 1. Heliosat-3 scheme [4]  SNOW COVER The old Heliosat method fails in wintertime, when snow is covering the surface under clear skies. Due to their high reflectances these cases are falsely classified as overcast, which leads to a remarkable error in the global irradiance values. Fig. 2 gives an example of an existing photovoltaic (PV) system showing high energy yield on 11th February 2006 while the satellite-based estimate is lower due to an error in snow-cloud discrimination.    Figure 2. Hourly effective energy production (solid line) and reference yields (yellow) of a PV plant (Source Enecolo SPYCE service).  Even the opposite effect is observed as e.g. in Fig. 3. In this case the PV system delivers an energy yield close to zero due to snow cover on the modules while the satellite-based energy production estimate reaches 1500 W as usual for a sunny situation in wintertime.  In case the snow cover is known, the assumption of a total hardware failure can be denied and a false alarm to the system maintenance staff can be avoided.   Figure 3. Hourly effective energy production (solid line) and reference yields (yellow) of a PV plant (Source Enecolo SPYCE service).  The MSG channels give the opportunity to discriminate snow from clouds and to reduce this error source. A multi-temporal snow cover detection algorithm was developed [5, 6]. Snow maps are derived in 3x3 km² nadir SEVIRI pixel resolution and superimposed to cloud index maps derived from HRV reflectances (1x1 km²) by an adapted Heliosat method. Results are given in Fig. 4. While some falsely detected snow pixels lead to an overestimation of global irradiance, the remarkable underestimation of a method without snow detection vanishes.    Figure 4. Hourly global irradiance with (blue) and without snow detection (red) for 20 German stations  in February – March 2005   GEOMETRICAL CORRECTION USING CLOUD HEIGHT MSG has another opportunity to gain a better quality in the derived surface irradiance, namely the higher resolution in space and time compared to MFG. When making full use of this high resolution data, a three dimensional consideration is optimal. A cloud in the sky has its largest effect on the irradiance measured at the ground when it is affecting the direct beam. For a given pixel the clouds between pixel and sun must be analyzed instead of the clouds between the pixel and the observer (MSG). For a geometric correction of this effect cloud top height is needed and can be provided by MSG SEVIRI. In a first approach a standard cloud of 1 km thickness and a seasonal variation of cloud top height was assumed. Fig. 5 gives validation results for global irradiances measured at the ground station Vaulx-en-Velin (France) for the period March – August 2004 and November 2004 – February 2005. Fig. 6 presents the same analysis but for Freiburg (Germany). A remarkable improvement in monthly root mean square errors (RMSE) can be noticed. The next step will be the use of MSG based cloud top height information.   Figure 5. Improvement in monthly RMSE of hourly global irradiance for Vaulx-en-Velin (France) due to a geometrical correction for cloud height.   global irradiance ground measured [W/m2]                global irradiance satellite [W/m2]   Figure 6. Improvement in monthly RMSE of hourly global irradiance for Vaulx-en-Velin (France) due to a geometrical correction for cloud height.    VALIDATION OF THE HELIOSAT-3 METHOD Taking the better spatial resolution of MSG-HRV in comparison to the old Meteosat satellite, the new capabilities for snow detection and a basic geometrical correction into account, an overall validation has been performed for 20 DWD ground stations measuring global irradiance for the full year of 2005 (Fig. 7). The overall bias for hourly values decreases from -1.2% for METEOSAT-7 to 0.4% for METEOSAT-8 and the standard error decreases from 19.5% to 17.8%.    Figure 7. Improvement in monthly bias and standard error of hourly global irradiance for 20 DWD  ground stations in 2005.   A significant improvement can be noticed in the winter months due to snow detection. During the summer months a slight improvement in standard error can also be noticed which is attributed to the increased spatial resolution of the HRV channel.   NEED FOR AEROSOL INFORMATION It has been stated e.g. by [7] that accurate aerosol information is crucial for irradiance calculations in the clear sky case. Climatologies or model output data sets with a typical grid size of 3 to 5° are currently available. Fig. 8 shows the RMSE in aerosol optical thickness at 550 nm to be expected for hourly values if such climatologies are used.    00,050,10,150,20,250,30,350 500 1000 1500 2000 2500 3000RMSE AOT550Entfernung [km]Figure 8. Variogram based on 30 European AERONET ground measurements of AOT at 550 nm in 2003.  distance between stations [km] This analysis was performed using AERONET ground measurements [8] for 30 European stations in 2003. Data from the year 2004 reveal similar results. From that analysis it can not be expected that new global data sets with a spatial resolution of several degrees can improve the situation remarkably. This is in line with the findings of the solar energy community that the use of different existing aerosol climatologies or recently made available model data sets did not increase the accuracy.  On the other hand, the new ENVISAT and the upcoming METOP satellites with the SCIAMACHY and GOME-2 instruments and a pixel size around 0.5° have the potential to deliver aerosol information in a spatial resolution more suitable for this user community. Yet, to account for the temporal and spatial variability of aerosols, an optimum retrieval scheme would deliver products in the same temporal and spatial resolution as MSG-SEVIRI.      pure sulfate aerosol polluted continental aerosol0.0         0.5           aerosol optical  depth at 550 nm Figure 9. Aerosol optical depth at 550nm derived from MSG SEVIRI on 1st August 2004 assuming fixed aerosol types.   AEROSOL STUDY BASED ON MSG Therefore, the SYNAER method was applied for SEVIRI. The SYNAER method (SYNergetic AErosol Retrieval, [Holzer-Popp]) delivers boundary layer aerosol optical depth (AOD) and type over both land and ocean. After cloud detection, AOD is calculated over automatically selected and characterized dark pixels and surface albedo correction for a set of 40 different pre-defined boundary layer aerosol mixtures is performed. A least square fit of a simulated spectrum based on the corrected surface albedo to the MSG SEVIRI channels delivers the AOD value. Unfortunately, MSG SEVIRI has no blue channels, which means that the spectrum is not covered complete. Therefore, accurate aerosol retrieval cannot be expected. Nevertheless, in the HELIOSAT-3 project a case study was made to quantify the dependence on aerosol type for an example case. Fig. 9 gives the SYNAER results for MSG-SEVIRI on 1st August 2004 assuming fixed aerosol types of pure sulfate and of a polluted continental aerosol. Large differences in quantitative values can be observed due to the missing aerosol type information as result of the missing spectral resolution of SEVIRI in the blue spectral region. This test trial reveals clearly, that aerosol type information has to be provided as auxiliary data set to a SEVIRI-based aerosol retrieval scheme. It is proposed to provide such information from polar satellites as e.g. ENVISAT and in future METOP as they have opportunities to separate major aerosol types.  Therefore, the next section reports on recent results in retrieving aerosol type information from ENVISAT AATSR and SCIAMACHY using SYNAER in the PROMOTE project.   AEROSOLS FROM ENVISAT For ENVISAT, the high spatial resolution of the AATSR instrument (Advanced Along Track Scanning Radiometer) permits accurate cloud detection, dark pixel selection and surface albedo correction. After spatial integration to the larger pixels of the spectrometer SCIAMACHY (SCanning Imaging Absorption spectroMeter for Atmospheric CartograpHY) these parameters are used to simulate SCIAMACHY spectra for the same set of different aerosol mixtures.  SYNAER has been implemented for operational processing at the German Remote Sensing Data Center within the ESA GSE PROMOTE (Protocol Monitoring for the GMES Service Element; see also http://www.gse-promote.org) and delivers daily near-real time observations (within the same day) and an evolving archive of historic data.               Figure 9: Seasonal variation of soot: monthly mean maps of soot aerosol optical depths for the months April, July, August, September, October 2003, and December 2005 are shown from top to bottom. As comparison the AEROCOM climatology [10] is given.  The seasonal behavior visible in the SYNAER data is shown in Fig. 9 for the soot component. Here, three major features can be seen: From July to September the tropical African biomass burning moves South and East together with its plume over the Atlantic (which is slightly visible). The Amazonian biomass burning season mainly extends from August to October. Over large parts of Europe, no data are available in December (due to low sun, high cloudiness and snow cover). Highest European soot concentrations are detected, when observations are becoming available still in the heating season (April). Additionally, wildfires in August (hot summer 2003) contribute to elevated soot over the Iberian peninsula.   CONCLUSIONS Starting from the fact that large inconsistencies in existing irradiance data bases available for solar energy engineering, the Heliosat-3 RAO project aimed at using the enhanced temporal, spatial and spectral resolution of the Meteosat Second Generation SEVIRI instrument for an improved derivation of global and direct irradiance.  It was shown, that cloud top height is needed to account for basic three-dimensional effects of clouds in radiative transfer. In future, SEVIRI derived cloud top heights will be included in a modified cloud index scheme as part of the new Heliosat-3 method.  Additionally, snow detection allows avoiding errors due to misdetection of clouds as snow and vice versa. It helps to decide on a possible hardware failure in automatic failure detection routines for photovoltaic system monitoring.  A parameterization scheme (SOLIS, [3]) based on radiative transfer calculations was developed which allows to take actual information on aerosol optical depth, angstrom coefficient and water vapor concentration into account. There is an urgent need for improved aerosol optical depth information in a better spatial and temporal resolution than available nowadays from global models and climatologies. Therefore, SYNAER aerosol retrievals were analyzed both for a test trial with MSG SEVIRI and for ENVISAT. The trial for SEVIRI shows the clear need for aerosol type information as input for any aerosol optical depth retrieval scheme using SEVIRI.  ENVISAT based SYNAER results show first successful results on the discrimination of water soluble and soot results, while the large aerosol particles from mineral and sea salt sources are still a subject of further work.  Follow-on activities will be performed in the virtual Institute of Energy Meteorology (vIEM), the ESA GSE PROMOTE and on the market development for solar energy services based on Earth observation within the ESA EOMD project ENVISOLAR.   REFERENCES 1. Cano, D., Monget, J., Albuisson, M., Guillard, H., Regas, N., and Wald, L., A method for the determination of the global solar radiation from meteorological satellite data, Solar Energy, 37, 31–39, 1986. 2. Beyer, H., Costanzo, C., Heinemann, D., Modifications of the Heliosat procedure for irradiance estimates from satellite images, Solar Energy, 56, 207– 212, 1996. 3. Müller, R.W., K. F. Dagestad, P. Ineichen, M. Schroedter-Homscheidt, S. Cros, D. Dumortier, R. Kuhlemann, J.A. Olseth, G. Piernavieja, C. Reise, L. Wald, D. Heinemann, Rethinking satellite-based solar irradiance modeling - The SOLIS clear-sky module, Remote Sensing of Environment, 91, 160-174, 2004. 4. Zelenka, A., Science Review ENVISOLAR project, http://www.envisolar.com, 2004 5. Heinicke, S., Schneeerkennung auf Basis von multispektralen und multitemporalen Meteosat-8-Informationen - Einbettung in das bestehende Verfahren der Heliosat-Methode, Diploma Thesis University of Oldenburg, 2006 6. De Ruyter de Wildt, M., Seitz, G., Grün, A., Snow mapping using multi-temporal Meteosat-8 data, EARSEL eProceedings 5, 1/2005. 7. Gueymard, C. A., Direct solar transmittance and irradiance predictions with broadband models. Part I: detailed theoretical performance assessment, Solar Energy, 74, 355-379, 2003. 8. Holben, B.N., et al, AERONET: A federated instrument network and data archive for aerosol characterization, Remote Sensing of Environment, 66, 1-16, 1998.  9. Holzer-Popp, T., Schroedter, M., & Gesell, G., Retrieving aerosol optical depth and type in the boundary layer over land and ocean from simultaneous GOME spectrometer and ATSR-2 radiometer measurements: 1. Method description, Journal of Geophysical Research, 107(D21), 4578, 2002. 10 Kinne, S., An AeroCom initial assessment – optical properties in aerosol component modules of global models, Atmos. Chem. Phys. Discuss., 5, 8285–8330, 2005.   

A method for the determination of the global solar radiation from meteorological satellite data,

AERONET: A federated instrument network and data archive for aerosol characterization,

Direct solar transmittance and irradiance predictions with broadband models. Part I: detailed theoretical performance assessment,

Modifications of the Heliosat procedure for irradiance estimates from satellite images,

Rethinking satellite-based solar irradiance modeling - The SOLIS clear-sky module,

Retrieving aerosol optical depth and type in the boundary layer over land and ocean from simultaneous GOME spectrometer and ATSR-2 radiometer measurements: 1. Method description,

Schneeerkennung auf Basis von multispektralen und multitemporalen Meteosat-8-Informationen - Einbettung in das bestehende Verfahren der Heliosat-Methode, Diploma Thesis University of Oldenburg,

Science Review ENVISOLAR project, http://www.envisolar.com,

Energy-specific solar radiation data from MSG: The Heliosat-3 Project

https://hal-mines-paristech.archives-ouvertes.fr/hal-00466840

Energy-specific solar radiation data from MSG: The Heliosat-3 Project

Abstract

Similar works

Full text

Available Versions

HAL-MINES ParisTech

Institute of Transport Research:Publications