Estudios numéricos del campo de flujo para toberas
convergentes-divergentes con longitud de garganta,
han reportado fluctuaciones del flujo con ondas de
choque oblicuo en la sección de la garganta, para
la condición de flujo sobre-expandido. Sin embargo,
para otras condiciones del flujo, para un mismo tipo
de tobera, el conocimiento es limitado. En el presente
trabajo, el objetivo es determinar el comportamiento
del flujo en la longitud de garganta y en la divergente,
para una tobera cónica experimental clasificada como
Helios-X, para la condición de flujo sub-expandido. Se
realizaron simulaciones numéricas 2D del campo de
flujo con el código ANSYS-Fluent versión 12.1, aplicando el modelo RANS. Se emplearon las ecuaciones
gobernantes para el flujo compresible, conservación
de la masa, cantidad de movimiento, energía y de
estado; así como, para la turbulencia el modelo SST
k − ω de Menter y para la viscosidad en función de
la temperatura la ecuación de Sutherland. En la sección de la garganta, adyacente a la pared,
el flujo presentó fluctuaciones, en la simetría axial el
flujo presentó una aceleración escalonada; en la sección divergente, el flujo se desaceleró en cierta región,
sin embargo, el flujo salió de la tobera a velocidad
supersónica ligeramente mayor de Mach 3. Se concluye que en la sección de la longitud de garganta se
presenta un patrón de flujo, así como, en la sección
divergente.//Numerical studies of the flow field for convergentdivergent nozzles with throat length, have reported
fluctuations of the flow with oblique shock waves in
the throat section, for the over-expanded flow condition. However, for other flow conditions, for the same
type of nozzle, knowledge is limited. In the present
work, the objective is to determine the behavior of
the flow in the throat length and in the divergent, for
an experimental conical nozzle classified as Helios-X,
for the under-expanded flow condition. 2D numerical simulations of the flow field were performed with
the ANSYS-Fluent version 12.1 code, applying the
RANS model. The governing equations for compressible flow, conservation of mass, momentum, energy,
and state were used; as well as, for turbulence, the
Menter model SST k − ω and for the viscosity as a
function of temperature the Sutherland equation. In the section of the throat, adjacent to the wall, the
flow presented fluctuations, in the axial symmetry
the flow presented a stepped acceleration; in the divergent section, the flow slowed in a certain region,
however, the flow exited the nozzle at a supersonic
speed slightly greater than Mach 3. It is concluded
that in the throat length section there is a flow pattern, as well as, in the divergent section