Millimeter-wave (mmWave) communications is a promising enabling technology for high rate (Giga-bit) multimedia applications. However, because oxygen absorption peaks at 60 GHz, mmWave signal power degrades significantly over long distances. Therefore, a traffic flow transmitting over multiple short hops is preferred to improve the flow throughput. In this thesis, we first design a hop selection metric for the piconet controller (PNC) to select appropriate relay hops for a traffic flow, aiming to improve the flow throughput and balance the traffic loads across the network. We then propose a multi-hop concurrent transmission (MHCT) scheme to exploit the spatial diversity of the mmWave WPAN by allowing multiple communication links to transmit simultaneously. By deriving the probability that two links can transmit simultaneously as a function of link length, the MHCT scheme is capable of improving spatial multiplexing gain in comparison with the single hop concurrent transmission (SHCT) scheme. We theoretically demonstrate that by properly breaking a single long hop into multiple short hops, the time resource can be utilized more efficiently, thus supporting more traffic flows in the network within the same time interval. In addition, the per-flow throughput is obtained analytically. Extensive simulations are conducted to validate the analysis and demonstrate that the proposed MHCT scheme can significantly improve the average traffic flow throughput
