Estudio hidrológico e hidráulico del proceso de socavación en estribos y pilares del puente Laramie-Chao aplicando modelamiento matemático

Abstract

La presente tesis se realizó con la finalidad de determinar los criterios técnicos para realizar el estudio hidrológico e hidráulico y calcular la profundidad de socavación en estribos y pilares con un periodo de retorno de 500 años en el puente Laramie, ubicado a la altura del Km 498+000 de la Carretera Panamericana Norte en el distrito de Chao provincia de Virú –La Libertad. Se hizo toma, registro y procesamiento de datos para realizar el estudio hidrológico e hidráulico, usando como instrumentos programas de informática. Tomamos parámetros hidráulicos que el HEC –RAS nos proporciona, con el objetivo de realizar la simulación hidráulica del rio Chorobal para hallar el derecho de vía del rio y determinar el área de influencia del flujo para precisar la socavación de acuerdo método Lischtvan - Levediev y el método Artamonov Los caudales máximos instantáneos se hicieron según el método de Creager, en él nos da como resultado para los periodos de retorno de 100,50,25,10,5,3,2 años, los caudales máximos fueron: 227.4 m3/seg, 193.2 m3/seg,158.9 m3/seg, 113.7 m3/seg, es 79.5 m3/seg, 54.3 m3/seg y 34.2 m3/seg. La profundidad de socavación del fondo del cauce es de Hs = 1.84 m dique aguas arriba y Hs =1.35m socavación en dique intermedio y Hs = 0.90 m socavación dique con puente y socavación local en la subestructura del puente es de 0.95m .This thesis was carried out with the purpose of determining the technical criteria to carry out the hydrological and hydraulic study and calculate the depth of undercutting in stirrups and pillars with a return period of 500 years at the Laramie Bridge, located at the height of Km 498 +000 of the Pan-American Highway North in the district of Chao province of Virú –La Libertad. Data collection, recording and processing were done to carry out the hydrological and hydraulic study, using computer programs as instruments. We take hydraulic parameters that the HEC –RAS provides us, with the objective of performing the hydraulic simulation of the Chorobal river to find the right of way of the river and determine the area of influence of the flow to specify the general undercutting according to Lischtvan - Levediev method and the Artamonov method The maximum instantaneous flows were made according to the Creager method, it results in the return periods of 100.50,25,10,5,3,2 years, the maximum flows were: 227.4 m3 / sec, 193.2 m3 / sec, 158.9 m3 / sec, 113.7 m3 / sec, is 79.5 m3 / sec, 54.3 m3 / sec and 34.2 m3 / sec. The depth of undercutting of the bottom of the riverbed is Hs = 1.84 m upstream dike and Hs = 1.35m undercutting in intermediate dock and Hs = 0.90 m undercutting with bridge and local undercutting in the substructure of the bridge is 0.95m.Tesi

    Similar works