research

Friction Stir Processing of SSM356 Aluminium Alloy

Abstract

AbstractThe aim of this experiment was to improve the mechanical properties of SSM 356 aluminum alloys by friction stir processing, a solid-state technique for microstructural modification using the heat from a friction and stirring. The parameters of friction stir processing for SSM 356 aluminum alloys were studied at three different travelling speeds: 80, 120 and 160mm/min under three different rotation speeds 1320, 1480 and 1750rpm. The hardness and tensile strength properties were increased by friction stir processing. The hardness of friction stir processing was 64.55 HV which was higher than the base metal (40.58 HV). The tensile strengths of friction stir processing were increased about 11.8% compared to the base metal. The optimal processing parameter was rotation speed at 1750rpm with the travelling speed at 160mm/min. Consequently, the application of the friction stir processing is a very effective method for the mechanical improvement of semi-solid metal aluminum alloys

    Similar works