Evaluation of microstructure and mechanical property variations in AlxCoCrFeNi high entropy alloys produced by a high-throughput laser deposition method

Abstract

Twenty-one distinct AlxCoCrFeNi alloys were rapidly prepared by laser alloying an equiatomic CoCrFeNi substrate with Al powder to create an alloy library ranging x=0.15-1.32. Variations in crystal structure, microstructure and mechanical properties were investigated using X-ray diffraction, scanning electron microscopy, scanning transmission electron microscopy and nanoindentation. With increasing Al content, the crystal structure transitioned from a disordered FCC to a mixture of disordered BCC and ordered B2 structures. While the onset of BCC/B2 formation was consistent with previously reported cast alloys, the FCC structure was observed at larger Al contents in the laser processed materials, resulting in a wider two phase regime. The FCC phase was primarily confined to the BCC/B2 grain boundaries at these high Al contents. The nanoindentation modulus and hardness of the FCC phase increased with Al content, while the properties of the BCC/B2 structure were insensitive to composition. The structure and mechanical properties of the laser-processed alloys were surprisingly consistent with reported results for cast alloys, demonstrating the feasibility of applying this high-throughput methodology to multicomponent alloy design.Comment: 20 pages, 8 figures and 1 tabl