In rocket engines power is usually obtained by burning fuel and oxidizer which are mixed, pressurized, and directed to a combustion chamber by means of turbopumps. Roller bearings are generally used in these turbopumps, but because of bearing demands hydrostatic bearings were proposed. The use of such bearings is quite feasible because during flight hydrostatic lubrication can reduce roller bearing wear. A disadvantage of such proposals is that during startup, acceleration, and shutdown high pressure fluids are not available for hydrostatic bearings. The fluid lubrication film is not always present in bearings of turbopumps. During these periods a second bearing is required to carry the load. This requirement suggests the use of hybrid bearings in rocket engine turbopumps. Such duplex bearings were provided, but when their inner races are keyed to the shaft or journal two of them are required. And such duplex bearings do not wear evenly. A hybrid hydrostatic-rolling element bearing was provided wherein the rolling element bearing is locked on the stationary housing rather than on the rotating journal
