Bastos da Silva Fanta, Alice

Han, Anpan

Jensen, Flemming

Todeschini, Matteo

Wagner, Jakob Birkedal

Online Research Database In Technology

                       General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.  • Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal   If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim.     Downloaded from orbit.dtu.dk on: Dec 16, 2017Electron Microscopy Characterization of Adhesion Layer Influence on Ultra-thin GoldFilmsTodeschini, Matteo; Bastos da Silva Fanta, Alice; Jensen, Flemming; Han, Anpan; Wagner, JakobBirkedalPublication date:2017Document VersionPublisher's PDF, also known as Version of recordLink back to DTU OrbitCitation (APA):Todeschini, M., Bastos da Silva Fanta, A., Jensen, F., Han, A., & Wagner, J. B. (2017). Electron MicroscopyCharacterization of Adhesion Layer Influence on Ultra-thin Gold Films. Abstract from The 68th AnnualConference of the Nordic Microscopy Society (SCANDEM 2017), Reykjavik, Iceland.Session 6: Physical sciences: Materials and nanosciences SCANDEM 2017, Reykjavik, Iceland Electron Microscopy Characterization of Adhesion Layer Influence on Ultra-thin Gold Films Matteo Todeschini*, Alice Bastos da Silva Fanta, Flemming Jensen, Anpan Han, Jakob Birkedal Wagner DTU Danchip/CEN, Technical University of Denmark, DK-2800 Kongens Lyngby, Denmark. *E-mail: mattod@dtu.dk Keywords: metal thin-films, adhesion layers, film nanostructure, electron microscopy. Au, Ag and Cu are used in a wide range of applications and research areas, e.g. semiconductors, plasmonics, metamaterials and 2D materials. However they are strongly affected by poor mechanical adhesion to the substrate, leading to thin-film peeling and time-dependent device performances deterioration. To enhance their adhesion, thin adhesion layers such as Ti and Cr are introduced. There is little knowledge on the effect of an adhesion layer on the nanostructure of functional metal thin-film overlayers. There is also a lack of information regarding the final structure of the Au film when different adhesion layers are used. Comprehension of these changes might have an important impact on fabrication of nanodevices with superior electrical performances, since thin-film nanostructure is directly connected to electrical conductivity. In this work, using complementary electron microscopy characterization techniques, we investigated how Cr and Ti adhesion layers influence the nanostructure of ultra-thin Au over-layers. TEM cross section and EDX analysis showed the different morphology of SiO2/Ti/Au and SiO2/Cr/Au multilayers, revealing high Cr diffusion into Au as opposed to the Ti case. Using Transmission Kikuchi Diffraction (TKD) [1] we detected a change of grain size and orientation of the Au overlayer compared to pure Au (Fig. 1A) for both adhesion layers. Using STEM-EELS we observed that both adhesion layers are oxidized (Fig. 1B). Integration of these results with XPS depth profile showed that the partial oxidation happens during film deposition for both adhesion layers. Micro 4-point probe measurements presented electrical conductivity increase for Ti/Au and deterioration for Cr/Au stacks compared to pure Au, attributed to film parallel resistor behavior [2] and Cr/Au alloy formation, respectively.  Figure 1: (A) TKD IPFZ map of 20 nm Au (left) and 2nm Cr/20nm Au (right); (B) STEM-EELS linear scan of 2nm Ti/2nm Au sample. [1] R. R. Keller, R. H. Geis, Journal of Microscopy 245 (3), 245-251 (2012). [2] Y. Y. Chen, J. Y. Juang, Meas. Sci. Technol. 27 (7), 74006 (2016). 

Electron Microscopy Characterization of Adhesion Layer Influence on Ultra-thin Gold Films

http://orbit.dtu.dk/ws/files/138026079/Untitled.pdf

Electron Microscopy Characterization of Adhesion Layer Influence on Ultra-thin Gold Films

Abstract

Similar works

Full text

Available Versions

Online Research Database In Technology