Heggelund, Laura Roverskov

Nanoteknologi tilbyder mange fordele som kan udnyttes til at forbedre f.eks. bæredygtigheden eller funktionaliteten af forskellige forbrugerprodukter. Syntetiske nanomaterialer (SNM) bliver i dag brugt i mange forbrugerprodukter, men brugen af disse specifikt fremstillede materialer er ikke specifikt reguleret, som det er tilfældet for såkaldt konventionelle kemikalier. Dette skaber bekymring på grund af uvisheden omkring hvorvidt SNM frigives igennem produkternes livscyklus og de miljøeffekter dette kunne medføre. Særligt når det kommer til bortskaffelsesfasen, er der begrænset viden om tilgængeligheden af SNM fra forbrugerprodukter. For at kunne vurdere den potentielle miljørisiko associeret med SNM i affald er det nødvendigt at undersøge både hvilke SNM der bruges – og i hvilket omfang, hvordan SNM behandles i affaldsfasen afhængig af den produktmatrix de er til stede i, samt sandsynligheden for at SNM kan frigives under affaldsbehandlingen. Derfor havde denne PhD afhandling til formål at i. kortlægge tilgængelige forbrugerprodukter indeholdende SNM (nanoprodukter) samt analysere fordelingen og brugen af SNM i forskellige produktkategorier, ii. udvikle en metode til kategorisering af affaldsfraktioner for nanoprodukter og estimere hvilken affaldsbehandling disse produkter sandsynligvis vil underlægges, iii. analysere genereret nanoaffald fra forbrugerprodukter i forhold til udbredelsen, fordelingen og affaldsbehandlingen af SNM, iv. undersøge frigivelsen af udvalgte SNM fra nanoprodukter eksperimentelt ved hjælp af en standardiseret procedure for affaldskarakterisering og, v. at komme med anbefalinger til fremtidige studier, som kombinerer nano-karakterisering og standardiseret affaldskarakterisering. Til at undersøge udbredelsen og fordelingen af nanoprodukter kan bruges forskellige produktregistre f.eks. BUND, PEN CPI og The Nanodatabase. Dog er alle disse registre begrænset af manglende informationer om SNM mængde, type og/eller antallet af nanopartikler i et produkt. Overordnet set bruges SNM mest i produkter til ”Sundhed og Fitness” eller ”Hjem og Have”, og dette har ikke ændret sig indenfor de seneste år på trods af den store tilgang af nye nanoprodukter. Registrene ”PEN CPI” og ”The Nanodatabase” er baseret på producentens påstand om, at produktet er baseret på nanoteknologi, men denne påstand er ofte ubegrundet hvilket medfører at mange nanoprodukter registreres med et ukendt SNM. Dette gælder f.eks. for 64% af alle produkter registreret i The Nanodatabase. Denne analyse viste også at nanosølv benyttes hyppigst i forbrugerprodukter og at det bliver brugt i meget forskelligartede produkter såsom kosmetik, tekstiler og fødevarebeholdere. På baggrund af informationer om registrerede produkter i The Nanodatabase, blev udviklet en metode til at analysere fordelingen af SNM i affald, hvorved skæbnen for alle SNM i udvalgte affaldssystemer estimeres ud fra nanoproduktets primære matrix materiale, f.eks. metal eller plastik. Denne information blev inkluderet i The Nanodatabase for at muliggøre en online analyse af forskellige affaldsscenarier for de registrerede nanoprodukter. Affaldsbehandlings-analysen viste at den største affaldsfraktion for nanoprodukterne var ”Plastik indpakning”, efterfulgt af ”Elektronik” og ”Tekstil” affald. ”Plastik indpakning” omfattede her primært et stort antal produkter, som sælges i plastikbeholdere, hvilket betyder, at kun en lille andel af SNM forventes at være tilbage i produktet ved endt brug. Nanosølv var til stede i næsten alle affaldsfraktioner, hvilket stemmer overens med at det benyttes i mange forskellige produkttyper. I forhold til affaldsbehandling i EU blev det estimeret, at gennemsnitligt 50% af nanoprodukterne vil gennemgå en genbrugsproces, 26% vil deponeres og 19% vil afbrændes. Dog afhænger denne fordeling af det specifikke affaldssystem i den region, der undersøges. Det forventes også at en større andel af SNM vil ende i deponi, eftersom de kan akkumulere i slam fra vandrensningsanlæg eller aske og slagge efter affaldsafbrænding, hvilke ofte deponeres. En yderligere forudsætning for karakterisering af SNM i et affaldsscenarie er at deres potentielle frigivelse fra nano-affaldsmatricen kan kvantificeres. Ydermere, er det vigtigt at opnå en forståelse for hvordan SNM transformeres igennem nanoproduktets livscyklus. Data for eksperimentel karakterisering af SNM frigivet fra nanoprodukter eller affaldsmatricer er knap. De fleste studier er præget af analytiske begrænsninger og undersøger kun kunstige affaldsmatricer med tilsat SNM. De primære udfordringer for eksperimentel karakterisering af nanoaffald, skyldes kompleksiteten af selve affaldsmaterialet, den store variation af SNM og produktmatrix kombinationer, den lave koncentration af SNM i affaldet, samt for nogle SNM den høje naturlige baggrund af partikler. For at kunne undersøge effekten af produktets matrix på frigivelsen af SNM, er det derfor vigtigt at studere nanoprodukterne i den form de er tilgængelige for forbugere. I denne afhandling blev udvalgte nanoprodukter undersøgt ved hjælp af en standardiseret test til affaldskarakterisering og den potentielle frigivelse af SNM blev karakteriseret ved brug af nano-specifikke analysemetoder, her specifikt single particle-ICP-MS (sp-ICP-MS), TEM/EDX og målinger af zetapotentiale. Eftersom mere end 50% af SNM globalt set forventes at blive deponeret blev der anvendt en standardiseret udvaskningstest til vurdering af mulig SNM frigivelse fra de udvalgte nanoprodukter. De to casestudier repræsenterede to typer af SNM og produktmaterialer: selvrensende keramiske fliser med nano-TiO2 på overfladen og træ malet med træbeskyttelse indeholdende nano-CuO. Ydermere, blev forskellige miljøforhold efterlignet, her specifikt høj ionstyrke og tilstedeværelse af organisk materiale. For begge produkter blev det konkluderet, at den potentielle frigivelse af SNM var lav. Men især for nano-CuO viste sp-ICP-MS analysen en klar størrelsesfordeling af Cu-nanopartikler, hvor median størrelsen i udvaskningsprøver var væsentligt forskellig fra det rene udvaskningsmedieNye indgangsvikler og metoder til karakterisering af nanoaffaldblev fremlagt i denne afhandling, men yderligere forskning er nødvendig for at videreudvikle og validere disse metoder. Fremtidige studier af SNM frigivelse fra affald bør anvende egentlige nanoprodukter i den form de produceres, samt undersøge forskellige matrixkombinationer for at tage højde for transformationer af SNM, som kan ske i produktets levetid. Udviklingen af analytiske metoder er lovende, f.eks. udvikles nye fingerprinting eller sporingsmetoder for SNM, og sp-ICP-MS bliver i højere grad end tidligere en rutineanalyse, dog med store udfordringer i forhold til matrixinterferenser. I forhold til at risikovurdere det store antal nanoprodukter, som er tilgængelige, er det nødvendigt at opnå en større forståelse af frigivelsen af SNM fra affaldsfasen. Eftersom SNM regnes som potentielle forurenende stoffer i fast affald er det vigtigt at inkludere nano-specifik karakterisering for at sikre en sikker bortskaffelse af nanoaffald.In the last decades, benefits provided by nanotechnology have been utilised for example to increase the sustainability and functionality of consumer products. Engineered nanomaterials (ENMs) are widely used in consumer products across different applications, but their use in nanoproducts has not been regulated specifically - as is the case for other chemicals and substances. This has caused concern regarding the possible release and effects of ENMs during the life cycle of nanoproducts. Specifically knowledge regarding the end-of-life phase is limited. In order to assess the potential environmental exposure or risks associated with ENMs in waste from nanoproducts, it is necessary to investigate what ENMs are being used and to which extent, how they are treated at the end-of-life of the nanoproduct and, finally, what is the likelihood of them being released during waste treatment. This PhD project addressed these knowledge gaps by mapping and analysing available nano-enabled products, developing a method for categorising waste material fractions of nanoproducts and estimating their likely waste treatment. Furthermore, new experimental data regarding ENM release from nano-enabled products was provided, applying a standardised waste characterisation test. To investigate the abundance and distribution of nanoproducts, different product inventories exist, such as BUND, PEN CPI and The Nanodatabase. However, they are all limited by the lack of available quantitative information about ENM mass or particle number in the products. Overall, the most common product applications for ENMs are the “Health &amp; Fitness” or “Home &amp; Garden” sector, which was still the case, despite the increasing number of nanoproducts. The product inventories PEN CPI and The Nanodatabase are based on manufacturers’ claims regarding nanotechnology, which are often unsubstantial leading to many products being registered with an unknown ENM, such as 64% of all products registered on The Nanodatabase. It was discovered that out of all ENMs registered on The Nanodatabase nano-Ag was used in the greatest number of products and in a range of product applications (e.g. in cosmetics, textiles and food containers). By utilising The Nanodatabase product inventory, a method was developed for analysing the distribution of ENMs in waste, which involved the estimation of ENM fate in selected waste treatments based on their main matrix material. This information was included on The Nanodatabase to enable the online analysis of different waste treatment scenarios. The waste treatment analysis revealed that the most significant waste material fraction was “Plastic packaging” followed by “Electronic”, “Textile” and “Multi material” waste. “Plastic packaging” waste involved mainly the large number of products sold in plastic containers, meaning that the remaining ENM mass at the time of disposal is expected to be minor. Nano-Ag was widespread across the identified waste fractions, thereby corresponding with the wide use of the material in different product categories. Furthermore, titanium-, silicon- and carbon-based ENMs were also present in several different waste material fractions (i.e. “Electronic”, “Multi material”, “Unknown”, “Plastic, other” and “Plastic, packaging”), whereas nano-phosphate and bamboo charcoal were only found in “Batteries” and “Textile” waste, respectively. In terms of waste treatment, it was estimated that on average in the EU around 50% of nano-enabled products are recycled, 19% are incinerated and 26% landfilled. However, these percentages depend on the specific waste treatments available in the investigated region. It is also expected that more ENMs will eventually enter a landfill, since they may accumulate in sewage sludge or waste incineration ashes, both of which are often landfilled. Another prerequisite for ENM characterisation in a waste scenario is the ability to quantify the potential ENM release from a nanowaste matrix. Experimental characterisation of ENM release from nano-enabled products or waste matrices is scarce, and most studies are limited by analytical constraints to detect the ENMs, or have investigated an artificial or “spiked” waste matrix. These studies cannot identify the behaviour of ENMs released from a real nano-enabled product nor how realistic environmental conditions will influence this release. The main challenges facing experimental nanowaste characterisation relate to the complexity of the matrices (both the waste matrix itself and the variety of ENM and product matrix combinations), the low concentration of ENMs present in the waste and, for some ENMs, the background quantities of natural particles being high making it near impossible to distinguish between engineered and natural entities. In this thesis, selected nanoproducts were investigated using a standardised waste characterisation test and the potential ENM release was characterised using nano-specific methods, namely single particle-ICP-MS, TEM/EDX and zeta potential. Since more than 50% of ENMs are expected to be landfilled on a global scale, a standardised batch leaching test was applied to characterise the nanoproducts. The case studies represented two different types of ENMs and product matrices: self-cleaning ceramic tiles with a nano-TiO2 coating and wood painted with nano-CuO wood protection paint. Different environmental conditions were mimicked i.e. high ionic strength (added CaCl2) and addition of organic matter. For both materials, the potential ENM release under these conditions was considered to be low, but they indicated that, there was an effect of media conditions on the particles released from a nano-enabled product. For nano-TiO2-coated tiles, total titanium release was approximately 0.01 µg/g material or below detection limit, slightly higher concentrations were found in leachates from nano-enabled tiles. Particle sizes and number concentrations were below calculated limits of detection (with the exception of one sample, “Ti CAL”) and the sp-ICP-MS analysis generally suffered interference from calcium. For wood painted with nano-CuO paint, presence of nano-Cu particles, of approximately 60-80nm in size, was confirmed using sp-ICP-MS. However, these findings are associated with uncertainty, and so additional tests are needed to assess quantitatively the nano-CuO release in terms of particle size and number concentration. While these two case studies showed limited release, it cannot be excluded that other matrix and ENM combinations may cause more significant releases. New approaches concerning nanowaste characterisation, both indirect and direct methods, were presented in this thesis, but further research is needed to develop and validate these methods. Future studies, assessing the potential release of ENMs from waste, should apply nano-enabled products and different product matrix combinations to take into account the transformations of the ENMs which may occur during the product life cycle. The development of analytical methods is promising e.g. the use of fingerprinting or other tracer techniques for ENMs, and sp-ICP-MS is becoming a routine analysis, though large challenges regarding matrix complexity and interferences still persist. Considering the large number of nanoproducts available, the potential release of ENMs from these products would have to be understood to perform a risk assessment of these products. Since ENMs are considered possible contaminants of the solid waste, it is important to include nano-specific characterisation tests in waste characterisation to ensure a safe disposal of the nanowaste

Online Research Database In Technology

Characterization of waste from nanoenabled products:Occurrence, distribution, fate and nanoparticle release

http://orbit.dtu.dk/ws/files/135008867/Thesis_online_version_Laura_Heggelund.pdf

Characterization of waste from nanoenabled products:Occurrence, distribution, fate and nanoparticle release

Abstract

Similar works

Full text

Available Versions

Online Research Database In Technology