V zaključni nalogi smo predstavili dejavnike, ki jih je potrebno upoštevati pri izgradnji cisternskega vozila za prevoz pitne vode. Osredotočili smo se na nadgradnje cisternskih vozil, ki se uporabljajo tudi za prevoz pitne vode in so produkt slovenskega podjetja. Naša naloga je bila raziskovalno in razvojno poudariti dejavnike, ki bi lahko med prevozom pitne vode škodili. Ugotavljali smo ali je material nerjaveče jeklo oznake AISI 304, ki prihaja v stik s pitno vodo, primeren za izgradnjo tovrstnih vozil. Ugotovili smo, da je pri izgradnji takega vozila, poleg pravilne izbire materiala, potrebno upoštevati različne predpise in konstrukcijske pristope izgradnje. Analiza rezultatov pitne vode nam je potrdila primernost omenjenega materiala za uporabo pri izgradnji cisternskih vozil, za namen prevoza pitne vode.In the final thesis we presented the key factors which must be considered in the design of drinking water tank vehicles. We focused on the upgrade of the drinking water tank vehicle type PRE 04, produced by a Slovenian company. Our aim was to research factors which could potentially be harmful during the transport of drinking water. We examined whether stainless steel AISI 304, which comes into contact with drinking water is suitable for the design of such vehicles. We have found that when designing such a vehicle, in addition to the correct selection of material, different regulations and approaches to design must be considered. The analysis of the results of drinking water confirmed the suitability of the mentioned material for use in the structure of water tank vehicles for transporting drinking water
