To reduce friction in turbo machinery components, riblets are induced on compressor blades or pump impellers. Here, the grinding process enables a higher productivity in machining of riblet structures compared to knurling, laser or milling operations. Usually, profiled grinding tools are used to create such structures inspired by sharkskin. Unfortunately, conventional grinding tools have to be dressed continuously to keep the desired profile in the circumferential surface. To avoid the time-consuming dressing process and to enable a self-sharpening effect, an innovative multi-layer tool concept is developed. The tool consists of two types of thin polyimide layers. The first type contains abrasives and the second is a support layer without abrasives. These layers are piled alternately in a special manufacturing process and act like a monolithic tool in grinding process. The aim of the investigations presented in this paper is to find an optimal parameter setting to produce riblet structures productively by using the self-sharpening effect. The optimal setting allows a grinding process without any dressing process by using a large part of the grinding tool volume. At first, the manufacturing process is focused to create clearly divided support and abrasive layers of the grinding tool. Furthermore, the investigation shows the relationship between grinding parameters and the setback of the supporting layer in the middle of the tool. This setback is important for the creation of riblet structures in the surface of AISI 420 workpieces