thesis

Specific heat measurements using the A.C. technique on the chevrel phase superconductor Pb(_1-x)Gd(_x)Mo(_6)S(_8) in high magnetic fields

Abstract

We have developed a probe to measure specific heat of Gd-doped PbMo(_6)S(_8), at low temperatures in high magnetic fields up to 12.5 T using a heat pulse method and an a.c. technique. Comparison between these heat capacity measurements and transport measurements provides critical complimentary information about fundamental thermodynamic properties and granularity m superconductors. We have used a tiny, robust, highly sensitive and broadly field independent Cemox thermometer (CX-1030), eliminating the use of bulky gas thermometry or capacitance thermometry. The diameter of the probe is 20 min which facilitates use in our 17 T high field magnet and in free-standing cryostats. Experiments include accurate measurement of temperature oscillations of 10(^-6)K. The measurements and analysis of the data were made fully computer controlled. Measurements on Cu and NbTi demonstrate we achieved an accuracy of ±0.2 K in temperature and a typical accuracy of -10% m the specific heat values quoted. Gd-doped Lead Chevrel phase material Pb(_1-x)Gd(_x)Mo(_6)S(_8) has been fabricated in a controlled environment using simple sintering methods and a Hot Isostatic Press (HIP) operating at pressures up to 2000 atmospheres. Cp has been measured and the properties of the materials including B(_c2)(T) have been determined. HIP processing improves the materials, increasing Tc ~ 15 K and B(_c2)(0) ~ 60 T. These values are amongst the best reported values for the Chevrel phase materials to date. I am personally responsible for taking all the data and its analysis. The modification of the probe were also undertaken by me. The fabrication of the samples was not my wor

    Similar works