Mesin Bor Otomatis Dengan Menggunakan Kamera Untuk Mendeteksi Koordinat Bor

Abstract

This paper describes about automatic drilling machine used to drill pad and via in Printed Circuit Board (PCB). The automatic drilling machine used camera as the sensor to detect coordinates of pad and via in PCB. This system used several methods of image processing like threshold, grayscale, and fillrect to detect the pad and via coordinates. This processes result the pad and via coordinates in pixels, then, these coordinates would be converted to millimeters in order to perform the drilling process. The automatic drilling machine used two stepper motors to perform the movement of X-axis and Y-axis. The machine also used two DC motors for the movement of Z-axis and drilling motor. The movement of each axis was designed by using the thread of a screw in order to achieve the precision movement. Experiment results show that average errors of the X-axis and Y-axis movement are 0.275 mm and 0.283 mm respectively. The system also could detect correctly all pad and via in PCB