T2K (Tokai-to-Kamioka) is a long-baseline neutrino experiment in Japan
designed to study various parameters of neutrino oscillations. A near detector
complex (ND280) is located 280~m downstream of the production target and
measures neutrino beam parameters before any oscillations occur. ND280's
measurements are used to predict the number and spectra of neutrinos in the
Super-Kamiokande detector at the distance of 295~km. The difference in the
target material between the far (water) and near (scintillator, hydrocarbon)
detectors leads to the main non-cancelling systematic uncertainty for the
oscillation analysis. In order to reduce this uncertainty a new
WAter-Grid-And-SCintillator detector (WAGASCI) has been developed. A magnetized
iron neutrino detector (Baby MIND) will be used to measure momentum and charge
identification of the outgoing muons from charged current interactions. The
Baby MIND modules are composed of magnetized iron plates and long plastic
scintillator bars read out at the both ends with wavelength shifting fibers and
silicon photomultipliers. The front-end electronics board has been developed to
perform the readout and digitization of the signals from the scintillator bars.
Detector elements were tested with cosmic rays and in the PS beam at CERN. The
obtained results are presented in this paper.Comment: In new version: modified both plots of Fig.1 and added one sentence
  in the introduction part explaining Baby MIND role in WAGASCI experiment,
  added information for the affiliation

Antonova, M.

Asfandiyarov, R.

Bayes, R.

Benoit, P.

Blondel, A.

Bogomilov, M.

Bross, A.

Cadoux, F.

Cervera, A.

Chikuma, N.

Da Silva, H. Pais

Dudarev, A.

Ekelöf, T.

Favre, Y.

Fedotov, S.

Hallsjö, S-P.

Izmaylov, A.

Karadzhov, Y.

Kate, H. Ten

Khabibullin, M.

Khotyantsev, A.

Kleymenova, A.

Koga, T.

Kostin, A.

Kudenko, Y.

Likhacheva, V.

Martinez, B.

Matev, R.

Medvedeva, M.

Mefodiev, A.

Minamino, A.

Mineev, O.

Nessi, M.

Nicola, L.

Noah, E.

Ovsiannikova, T.

Parsa, S.

Rayner, M.

Rolando, G.

Shaykhiev, A.

Simion, P.

Soler, F. J. P.

Suvorov, S.

Tsenov, R.

Vankova-Kirilova, G.

Yershov, N.

English

arXiv

T2K (Tokai-to-Kamioka) is a long-baseline neutrino experiment in Japan designed to study various parameters of neutrino oscillations. A near detector complex (ND280) is located 280 m downstream of the production target and measures neutrino beam parameters before any oscillations occur. ND280's measurements are used to predict the number and spectra of neutrinos in the Super-Kamiokande detector at the distance of 295 km. The difference in the target material between the far (water) and near (scintillator, hydrocarbon) detectors leads to the main non-cancelling systematic uncertainty for the oscillation analysis. In order to reduce this uncertainty a new WAter-Grid-And-SCintillator detector (WAGASCI) has been developed. A magnetized iron neutrino detector (Baby MIND) will be used to measure momentum and charge identification of the outgoing muons from charged current interactions. The Baby MIND modules are composed of magnetized iron plates and long plastic scintillator bars read out at the both ends with wavelength shifting fibers and silicon photomultipliers. The front-end electronics board has been developed to perform the readout and digitization of the signals from the scintillator bars. Detector elements were tested with cosmic rays and in the PS beam at CERN. The obtained results are presented in this paper

Asfandiyasrov, R.

Pais Da Silva, H.

Soler, F.J.P.

Ten Kate, H.

Enlighten: Publications

  
 
 
 
 
Antonova, M. et al. (2017) Baby MIND: A magnetized segmented neutrino detector for 
the WAGASCI experiment. Journal of Instrumentation, 12(7), C07028. 
 
   
There may be differences between this version and the published version. You are 
advised to consult the publisher’s version if you wish to cite from it. 
 
 
 
http://eprints.gla.ac.uk/145627/ 
     
 
 
 
 
 
 
Deposited on: 10 August 2017 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Enlighten – Research publications by members of the University of Glasgow 
http://eprints.gla.ac.uk 
Prepared for submission to JINST
International Conference "Instrumentation for Colliding Beam Physics" (INSTR17)
27 February - 03 March, 2017
Novosibirsk, Russia
Baby MIND: A magnetized segmented neutrino detector
for the WAGASCI experiment
M. Antonova,a,k R. Asfandiyarov,b R. Bayes,c P. Benoit,d A. Blondel,b M. Bogomilov,e
A. Bross, f F. Cadoux,b A. Cervera,g N. Chikuma,h A. Dudarev,d T. Ekelöf,i Y. Favre,b
S. Fedotov,a S-P. Hallsjö,c A. Izmaylov,a Y. Karadzhov,b M. Khabibullin,a A. Khotyantsev,a
A. Kleymenova,a T. Koga,h A. Kostin,a Y. Kudenko,a, j,k V. Likhacheva,a B. Martinez,b
R. Matev,e M. Medvedeva,a A. Mefodiev,a, j,1 A. Minamino,l O. Mineev,a M. Nessi,d L. Nicola,b
E. Noah,b T. Ovsiannikova,a H. Pais Da Silva,d S. Parsa,b M. Rayner,d G. Rolando,d
A. Shaykhiev,a P. Simion,i F.J.P. Soler,c S. Suvorov,a R. Tsenov,e H. Ten Kate,d
G. Vankova-Kirilovae and N. Yershov.a
aInstitute for Nuclear Research of the Russian Academy of Sciences,
60 October Revolution Pr 7a, Moscow, Russia
bDept. de Phys. Nucl. et Corpuscul. (DPNC), University of Geneva,
Quai Ernest-Ansermet 24, Geneva, Switzerland
cSchool of Physics and Astronomy, University of Glasgow,
Kelvin Building, Glasgow, UK
dEuropean Organization for Nuclear Research, CERN,
CH-1211 Geneva 23, Switzerland
eDepartment of Physics, University of Sofia,
James Bourchier Blvd. 5, Sofia, Bulgaria
fFermi National Accelerator Laboratory,
Kirk Road and Pine Street Batavia IL 60510-5011, Illinois, USA
gIFIC (CSIC & University of Valencia),
Calle Catedràtico Josè Beltran, 2, Valencia, Spain
hInternational Center for Elementary Particle Physics, University of Tokyo,
7-3-1 Hongo, Bunkyo-ku, Tokyo, Japan
iUniversity of Uppsala,
752 36, Uppsala, Sweden
jMoscow Institute of Physics and Technology,
9 Institutskiy per., Dolgoprudny, Moscow Region, Russia
kMoscow Engineering Physics Institute,
Kashirskoe shosse 31, Moscow, Russia
lYokohama National University,
79-8 Tokiwadai, Hodogaya, Yokohama, Japan
E-mail: aleksandr.mefodev@cern.ch
1Corresponding author.
Abstract: T2K (Tokai-to-Kamioka) is a long-baseline neutrino experiment in Japan designed to
study various parameters of neutrino oscillations. Anear detector complex (ND280) is located 280m
downstream of the production target and measures neutrino beam parameters before any oscillations
occur. ND280’s measurements are used to predict the number and spectra of neutrinos in the Super-
Kamiokande detector at the distance of 295 km. The difference in the target material between the far
(water) and near (scintillator, hydrocarbon) detectors leads to the main non-cancelling systematic
uncertainty for the oscillation analysis. In order to reduce this uncertainty a new WAter-Grid-And-
SCintillator detector (WAGASCI) has been developed. A magnetized iron neutrino detector (Baby
MIND) will be used to measure momentum and charge identification of the outgoing muons from
charged current interactions. The Baby MIND modules are composed of magnetized iron plates
and long plastic scintillator bars read out at the both ends with wavelength shifting fibers and silicon
photomultipliers. The front-end electronics board has been developed to perform the readout and
digitization of the signals from the scintillator bars. Detector elements were tested with cosmic rays
and in the PS beam at CERN. The obtained results are presented in this paper.
Keywords: Neutrino detectors, Muon spectrometers, Scintillators and scintillating fibres and light
guides
Contents
1 Introduction 1
2 Baby MIND design 1
3 Scintillator modules 3
4 Results of cosmic and beam tests 3
5 Baby MIND software 4
6 Summary 5
1 Introduction
T2K (Tokai-to-Kamioka) [1] is a long-baseline neutrino oscillation experiment in Japan which uses
the Super-Kamiokande water Cherenkov detector as the far detector at the distance of 295 km from
the neutrino beam source. A near detector complex (ND280) is located 280 m away from the target
and at 2.5◦ with respect to the beam axis. ND280 consists of tracking detectors surrounded by an
electromagnetic calorimeter, which are placed inside a magnet. A large part of the ND280 detector
is composed of plastic scintillator-based counters with wavelength shifting fibers. The difference
in the target material between far (water) and near (scintillator, hydrocarbon) detectors is one of the
major non-cancelling systematic uncertainty in the T2K oscillation analysis.
The WAGASCI experiment [2] at J-PARC has been proposed to reduce the systematic uncer-
tainties in the neutrino cross-section measurements on water and hydrocarbon. The WAGASCI
detector consists of two main parts, a 3D grid structured plastic scintillator target filled with H2O
and muon range detectors (MRD’s), which surround the central neutrino target on two sides (see
figure 1). TheMagnetized Iron Neutrino Detector (BabyMIND) [3–5] is located downstream of the
neutrino target. The Baby MIND will provide charge identification and momentum measurements
for muons resulting from neutrino interactions in the WAGASCI neutrino targets located upstream.
The charge of secondary particles from neutrino interactions are identified by the curvature of the
particle track in the Baby MIND magnetic field of 1.5 T. The MRDs measure the muon momentum
by muon path length in the detector layers.
2 Baby MIND design
The main goal of the Baby MIND is to identify µ+/µ− with a high efficiency and to measure their
momenta in an interval of 0.3-5.0 GeV/c. In this range the multiple scattering degrades the muon
momentum measurements. Our simulations show that the charge identification can be improved
– 1 –
Figure 1. Schematic view of the WAGASCI setup. Left — 1: 3D grid-structured WAGASCI wa-
ter/scintillator neutrino target; 2: Baby MIND; 3-4: side MRD’s. Right — The event sample of neutrino
interaction in the WAGASCI target is shown.
by optimizing the distance between the first magnet planes for the muon momentum down to 500
MeV/c. Figure 2 shows the basic design of the Baby MIND. The detector consists of 33 magnetized
30-mm thick iron plates and 18 scintillator planes. The magnet modules were designed to provide
Figure 2. The layout of BabyMIND. Scintillator planes are numerated from d0 (front plane) to d17, magnet
plates are numerated from s1 to s33.
a minimum field of 1.5 T over the central tracking region with an uniformity of better than 10%
within the iron along the projection of a horizontal plastic scintillator bar. The stray field outside the
iron plate is kept below 10 mT. The total power consumption for 33 magnet modules is 12 kW [6].
This is derived from the coil resistance and the voltage drop across the power supply. To satisfy the
– 2 –
space and transportation constraints, the design for the Baby MIND has individual magnetization
of the modules by normal conducting coils wound on the surface of the iron plates. The magnet
modules are made of the ARMCO steel sheets with two horizontal slits machined in the center and
are wrapped by an aluminum coil in a sewing pattern, as shown in Figure 3.
Figure 3. Two-slit configuration allows to halve the cross sections for flux return, leading to a larger central
tracking region.
3 Scintillator modules
The Baby MIND scintillator module (plane) is assembled by gluing together 95 horizontal and 16
vertical scintillator bars which are read out with WLS Kuraray Y11 fibers of 1 mm diameter and
silicon photomultipliers Hamamatsu S12571-025C. The scintillator composition is a polystyrene
dopedwith 1.5% of paraterphenyl (PTP) and 0.01% of POPOP. Vertical bar size is 0.7×21×195 cm3,
the WLS fiber covers the surface of scintillator in U-shape configuration with both fiber ends drawn
at the same end of the bar. Horizontal bars are narrow and longer with 0.7×3×288 cm3 size. The
fiber is glued in the straight groove along the central axis so that readout is implemented at both
ends of the bar.
In total, 1744 horizontal bars and 315 vertical bars were manufactured at the Uniplast company
(Vladimir, Russia). The 0.7 cm thick extruded slabs of 22 cm width were cut in the bars to the
specified size, then the bars were covered by 30–100 µm thick diffuse reflector using etching of
polystyrene surface with a chemical agent. Details about the manufacturing technology can be
found in [7, 8].
4 Results of cosmic and beam tests
Each bar was tested with cosmic rays to measure the light yield at both ends [9]. A trigger telescope
of two large counters was installed above and below of the central part of the parallel array of 4
bars. The same Hamamatsu MPPCs S12571-025C were utilized for the readout. The photosensor
signal after preamplifier was sent to a digitizer CAEN DT5742 with 5 GHz sampling rate, then the
charge was derived by integrating the signal pulse and calibrated in number of photoelectrons (p.
e.). We did not apply the correction for MPPC cross-talk so the absolute light yield shown below
is overestimated by 10%. The light yield value was corrected for temperature variations during the
tests with normalization to T = 22◦C.
– 3 –
The average light yield (sum of both ends) was measured to be 37.5 p.e./MIP and 65 p.e./MIP
for vertical and horizontal bars, respectively. Fig. 4 demonstrates the distribution of the light yields
Figure 4. Left—Distribution of the light yield (sum of both ends) for 315 vertical bars, right—distribution
of the light yield asymmetry between the ends.
for 315 vertical bars as well as the asymmetry in light yield between the ends. Light yields and
the asymmetry for 1744 horizontal bars are shown in Fig. 5. Light yield asymmetry in both the
Figure 5. Left — distribution of light yield (sum from both ends) for 1744 horizontal bars, right —
distribution of the light yield asymmetry between the ends.
horizontal and vertical bars does not exceed 10%.
Data obtained in the beam test at the T9 beam area of the CERN PS have been used to calculate
the detection efficiency. The electronic trigger signal was produced by two trigger counters in
coincidence. Figure 6 shows detection efficiency scan for vertical bars. Efficiency and timing
resolution for horizontal bars are described in details in a published paper [10].
5 Baby MIND software
Baby MIND uses the Simulation And Reconstruction Of Muons And Neutrinos (SaRoMaN) soft-
ware suite [4] to perform event reconstruction of both simulated muon and neutrino events as well
as real beam data. The software suite was developed by the Baby MIND project and has been
qualified with the Totally Active Scintillator Detector (TASD) [9] detector testbeam and will be
further qualified with the Baby MIND testbeam.
– 4 –
Figure 6. Top—vertical bar test map, bottom left— light yield scan across a bar, bottom right—detection
efficiency scan across a bar (blue – the events are counted if the charge is over the 3 p.e. threshold at either
of the bar ends (OR logic), green – if the charge is over the 3 p.e. at each of the bar ends (AND logic).
6 Summary
The detector modules of BabyMIND have been assembled and prepared for beam tests at CERN this
year. The magnetization scheme and assembly procedure have been successfully proven through the
construction yielding 1.5 T in the magnet modules. The average light yield (sum from both ends)
was measured with cosmic rays to be 37.5 p.e./MIP and 65 p.e./MIP for vertical and horizontal
bars, respectively.
A new Front End Board based on the CITIROC ASIC has been designed for the readout of
scintillator modules that will be used in the Baby MIND muon spectrometer. Ongoing beam tests
of Baby MIND modules with the front-end board confirm a high light yield of the scintillator bars
and a successful operation of the electronic readout scheme.
Acknowledgments
The results of section 2 were obtained within European Union’s Horizon 2020 Research and
Innovation programme under grant agreement No. 654168. The results of section 4 were obtained
within the RFBR/JSPS grant No. 17-52-50038 and the RFBR grant No.16-32-00766.
References
[1] K. Abe et al. [T2K Collaboration], The T2K Experiment, Nucl. Instrum. Meth. A 659 (2011) 106
[arXiv:1106.1238 [physics.ins-det]].
– 5 –
[2] T. Koga et al. Water/CH Neutrino Cross Section Measurement at J-PARC (WAGASCI Experiment),
JPS Conf. Proc. 8 (2015) 023003.
[3] A. Cervera et al. Performance of the MIND detector at a Neutrino Factory using realistic muon
reconstruction, Nucl.Instrum.Meth. A624 (2010) 601-614.
[4] M. Antonova et al., Baby MIND: A magnetized spectrometer for the WAGASCI experiment,
arXiv:1704.08079 [physics.ins-det].
[5] M. Antonova et al. [WAGASCI Collaboration], Baby MIND Experiment Construction Status,
arXiv:1704.08917 [physics.ins-det].
[6] G. Rolando et al. New and Optimized Magnetization Scheme for the Baby Magnetized Iron Neutrino
Detector at J-PARC, IEEE Transactions on Magnetics 53 (2017) Issue 5.
[7] Yu. Kudenko et al. Extruded plastic counters with WLS fiber readout, Nucl.Instrum.Meth. 469 (2001)
340.
[8] O. Mineev et al. Scintillator detectors with long WLS fibers and multi-pixel photodiodes, Journal of
Instrumentation 6 (2011) P12004.
[9] A. Mefodiev et al. The design, construction and testing of Totally Active Scintillator Detector, PoS
EPS-HEP2015:292 (2015) 067.
[10] W. Baldini et al. Measurement of parameters of scintillating bars with wavelength-shifting fibres and
silicon photomultiplier readout for the SHiP Muon Detector, JINST 12 (2017) P03005.
– 6 –


Baby MIND: A magnetized segmented neutrino detector for the WAGASCI experiment

T2K (Tokai-to-Kamioka) is a long-baseline neutrino experiment in Japan designed to study various parameters of neutrino oscillations. Anear detector complex (ND280) is located 280m downstream of the production target and measures neutrino beam parameters before any oscillations occur. ND280's measurements are used to predict the number and spectra of neutrinos in the Super-Kamiokande detector at the distance of 295 km. The difference in the target material between the far (water) and near (scintillator, hydrocarbon) detectors leads to the main non-cancelling systematic uncertainty for the oscillation analysis. In order to reduce this uncertainty a new WAter-Grid-And-SCintillator detector (WAGASCI) has been developed. A magnetized iron neutrino detector (Baby MIND) will be used to measure momentum and charge identification of the outgoing muons from charged current interactions. The Baby MIND modules are composed of magnetized iron plates and long plastic scintillator bars read out at the both ends with wavelength shifting fibers and silicon photomultipliers. The front-end electronics board has been developed to perform the readout and digitization of the signals from the scintillator bars. Detector elements were tested with cosmic rays and in the PS beam at CERN. The obtained results are presented in this paper.</p

Antonova, M.,

Asfandiyarov, R.,

Bayes, R.,

Benoit, P.,

Blondel, A.,

Bogomilov, M.,

Bross, A.,

Cadoux, F.,

Cervera, A.,

Chikuma, N.,

Dudarev, A.,

Ekelöf, Tord,

Favre, Y.,

Fedotov, S.,

Hallsjo, S-P

Izmaylov, A.,

Karadzhov, Y.,

Khabibullin, M.,

Khotyantsev, A.,

Kleymenova, A.,

Koga, T.,

Kostin, A.,

Kudenko, Y.,

Likhacheva, V.,

Martinez, B.,

Matev, R.,

Medvedeva, M.,

Mefodiev, A.,

Minamino, A.,

Mineev, O.,

Nessi, M.,

Nicola, L.,

Noah, E.,

Ovsiannikova, T.,

Da Silva, H. Pais,

Parsa, S.,

Rayner, M.,

Rolando, G.,

Shaykhiev, A.,

Simion, Patrik,

Soler, F. J. P.,

Suvorov, S.,

Tsenov, R.,

Ten Kate, H.,

Vankova-Kirilova, G.,

Yershov, N.,

Swepub

Baby MIND : a magnetized segmented neutrino detector for the WAGASCI experiment

M. Antonova

R. Asfandiyarov

R. Bayes

P. Benoit

A. Blondel

M. Bogomilov

A. Bross

F. Cadoux

A. Cervera

N. Chikuma

A. Dudarev

T. Ekelöf

Y. Favre

S. Fedotov

S-P. Hallsjö

A. Izmaylov

Y. Karadzhov

M. Khabibullin

A. Khotyantsev

A. Kleymenova

T. Koga

A. Kostin

Y. Kudenko

V. Likhacheva

B. Martinez

R. Matev

M. Medvedeva

A. Mefodiev

A. Minamino

O. Mineev

M. Nessi

L. Nicola

E. Noah

T. Ovsiannikova

H. Pais Da Silva

S. Parsa

M. Rayner

G. Rolando

A. Shaykhiev

P. Simion

F.J.P. Soler

S. Suvorov

R. Tsenov

H. Ten Kate

G. Vankova-Kirilova

N. Yershov

Crossref

Journal of Instrumentation

Baby MIND: a magnetized segmented neutrino detector for the WAGASCI experiment

T2K (Tokai-to-Kamioka) is a long-baseline neutrino experiment in Japan designed to study various parameters of neutrino oscillations. A near detector complex (ND280) is located 280 m downstream of the production target and measures neutrino beam parameters before any oscillations occur. ND280’s measurements are used to predict the number and spectra of neutrinos in the Super-Kamiokande detector at the distance of 295 km. The difference in the target material between the far (water) and near (scintillator, hydrocarbon) detectors leads to the main non-cancelling systematic uncertainty for the oscillation analysis. In order to reduce this uncertainty a new WAter-Grid-And-SCintillator detector (WAGASCI) has been developed. A magnetized iron neutrino detector (Baby MIND) will be used to measure momentum and charge identification of the outgoing muons from charged current interactions. The Baby MIND modules are composed of magnetized iron plates and long plastic scintillator bars read out at the both ends with wavelength shifting fibers and silicon photomultipliers. The front-end electronics board has been developed to perform the readout and digitization of the signals from the scintillator bars. Detector elements were tested with cosmic rays and in the PS beam at CERN. The obtained results are presented in this paper.</p

Ekelöf, T.,

Hallsjö, Sven-Patrik,

Silva, H. Pais Da,

Simion, P.,

Kate, H. Ten,

T2K (Tokai-to-Kamioka) is a long-baseline neutrino experiment in Japan designed to study various parameters of neutrino oscillations. A near detector complex (ND280) is located 280 m downstream of the production target and measures neutrino beam parameters before any oscillations occur. ND280's measurements are used to predict the number and spectra of neutrinos in the Super-Kamiokande detector at the distance of 295 km. The difference in the target material between the far (water) and near (scintillator, hydrocarbon) detectors leads to the main non-cancelling systematic uncertainty for the oscillation analysis. In order to reduce this uncertainty a new WAter-Grid-And-SCintillator detector (WAGASCI) has been developed. A magnetized iron neutrino detector (Baby MIND) will be used to measure momentum and charge identification of the outgoing muons from charged current interactions. The Baby MIND modules are composed of magnetized iron plates and long plastic scintillator bars read out at the both ends with wavelength shifting fibers and silicon photomultipliers. The front-end electronics board has been developed to perform the readout and digitization of the signals from the scintillator bars. Detector elements were tested with cosmic rays and in the PS beam at CERN. The obtained results are presented in this paper.T2K (Tokai-to-Kamioka) is a long-baseline neutrino experiment in Japan designed to study various parameters of neutrino oscillations. A near detector complex (ND280) is located 280~m downstream of the production target and measures neutrino beam parameters before any oscillations occur. ND280's measurements are used to predict the number and spectra of neutrinos in the Super-Kamiokande detector at the distance of 295~km. The difference in the target material between the far (water) and near (scintillator, hydrocarbon) detectors leads to the main non-cancelling systematic uncertainty for the oscillation analysis. In order to reduce this uncertainty a new WAter-Grid-And-SCintillator detector (WAGASCI) has been developed. A magnetized iron neutrino detector (Baby MIND) will be used to measure momentum and charge identification of the outgoing muons from charged current interactions. The Baby MIND modules are composed of magnetized iron plates and long plastic scintillator bars read out at the both ends with wavelength shifting fibers and silicon photomultipliers. The front-end electronics board has been developed to perform the readout and digitization of the signals from the scintillator bars. Detector elements were tested with cosmic rays and in the PS beam at CERN. The obtained results are presented in this paper

Hallsjö, S.-P.

CERN Document Server

Enlighten

      Antonova, M. et al. (2017) Baby MIND: A magnetized segmented neutrino detector for the WAGASCI experiment. Journal of Instrumentation, 12(7), C07028.     There may be differences between this version and the published version. You are advised to consult the publisher’s version if you wish to cite from it.    http://eprints.gla.ac.uk/145627/            Deposited on: 10 August 2017                       Enlighten – Research publications by members of the University of Glasgow http://eprints.gla.ac.uk Prepared for submission to JINSTInternational Conference "Instrumentation for Colliding Beam Physics" (INSTR17)27 February - 03 March, 2017Novosibirsk, RussiaBaby MIND: A magnetized segmented neutrino detectorfor the WAGASCI experimentM. Antonova,a,k R. Asfandiyarov,b R. Bayes,c P. Benoit,d A. Blondel,b M. Bogomilov,eA. Bross, f F. Cadoux,b A. Cervera,g N. Chikuma,h A. Dudarev,d T. Ekelöf,i Y. Favre,bS. Fedotov,a S-P. Hallsjö,c A. Izmaylov,a Y. Karadzhov,b M. Khabibullin,a A. Khotyantsev,aA. Kleymenova,a T. Koga,h A. Kostin,a Y. Kudenko,a, j,k V. Likhacheva,a B. Martinez,bR. Matev,e M. Medvedeva,a A. Mefodiev,a, j,1 A. Minamino,l O. Mineev,a M. Nessi,d L. Nicola,bE. Noah,b T. Ovsiannikova,a H. Pais Da Silva,d S. Parsa,b M. Rayner,d G. Rolando,dA. Shaykhiev,a P. Simion,i F.J.P. Soler,c S. Suvorov,a R. Tsenov,e H. Ten Kate,dG. Vankova-Kirilovae and N. Yershov.aaInstitute for Nuclear Research of the Russian Academy of Sciences,60 October Revolution Pr 7a, Moscow, RussiabDept. de Phys. Nucl. et Corpuscul. (DPNC), University of Geneva,Quai Ernest-Ansermet 24, Geneva, SwitzerlandcSchool of Physics and Astronomy, University of Glasgow,Kelvin Building, Glasgow, UKdEuropean Organization for Nuclear Research, CERN,CH-1211 Geneva 23, SwitzerlandeDepartment of Physics, University of Sofia,James Bourchier Blvd. 5, Sofia, BulgariafFermi National Accelerator Laboratory,Kirk Road and Pine Street Batavia IL 60510-5011, Illinois, USAgIFIC (CSIC & University of Valencia),Calle Catedràtico Josè Beltran, 2, Valencia, SpainhInternational Center for Elementary Particle Physics, University of Tokyo,7-3-1 Hongo, Bunkyo-ku, Tokyo, JapaniUniversity of Uppsala,752 36, Uppsala, SwedenjMoscow Institute of Physics and Technology,9 Institutskiy per., Dolgoprudny, Moscow Region, RussiakMoscow Engineering Physics Institute,Kashirskoe shosse 31, Moscow, RussialYokohama National University,79-8 Tokiwadai, Hodogaya, Yokohama, JapanE-mail: aleksandr.mefodev@cern.ch1Corresponding author.Abstract: T2K (Tokai-to-Kamioka) is a long-baseline neutrino experiment in Japan designed tostudy various parameters of neutrino oscillations. Anear detector complex (ND280) is located 280mdownstream of the production target and measures neutrino beam parameters before any oscillationsoccur. ND280’s measurements are used to predict the number and spectra of neutrinos in the Super-Kamiokande detector at the distance of 295 km. The difference in the target material between the far(water) and near (scintillator, hydrocarbon) detectors leads to the main non-cancelling systematicuncertainty for the oscillation analysis. In order to reduce this uncertainty a new WAter-Grid-And-SCintillator detector (WAGASCI) has been developed. A magnetized iron neutrino detector (BabyMIND) will be used to measure momentum and charge identification of the outgoing muons fromcharged current interactions. The Baby MIND modules are composed of magnetized iron platesand long plastic scintillator bars read out at the both ends with wavelength shifting fibers and siliconphotomultipliers. The front-end electronics board has been developed to perform the readout anddigitization of the signals from the scintillator bars. Detector elements were tested with cosmic raysand in the PS beam at CERN. The obtained results are presented in this paper.Keywords: Neutrino detectors, Muon spectrometers, Scintillators and scintillating fibres and lightguidesContents1 Introduction 12 Baby MIND design 13 Scintillator modules 34 Results of cosmic and beam tests 35 Baby MIND software 46 Summary 51 IntroductionT2K (Tokai-to-Kamioka) [1] is a long-baseline neutrino oscillation experiment in Japan which usesthe Super-Kamiokande water Cherenkov detector as the far detector at the distance of 295 km fromthe neutrino beam source. A near detector complex (ND280) is located 280 m away from the targetand at 2.5◦ with respect to the beam axis. ND280 consists of tracking detectors surrounded by anelectromagnetic calorimeter, which are placed inside a magnet. A large part of the ND280 detectoris composed of plastic scintillator-based counters with wavelength shifting fibers. The differencein the target material between far (water) and near (scintillator, hydrocarbon) detectors is one of themajor non-cancelling systematic uncertainty in the T2K oscillation analysis.The WAGASCI experiment [2] at J-PARC has been proposed to reduce the systematic uncer-tainties in the neutrino cross-section measurements on water and hydrocarbon. The WAGASCIdetector consists of two main parts, a 3D grid structured plastic scintillator target filled with H2Oand muon range detectors (MRD’s), which surround the central neutrino target on two sides (seefigure 1). TheMagnetized Iron Neutrino Detector (BabyMIND) [3–5] is located downstream of theneutrino target. The Baby MIND will provide charge identification and momentum measurementsfor muons resulting from neutrino interactions in the WAGASCI neutrino targets located upstream.The charge of secondary particles from neutrino interactions are identified by the curvature of theparticle track in the Baby MIND magnetic field of 1.5 T. The MRDs measure the muon momentumby muon path length in the detector layers.2 Baby MIND designThe main goal of the Baby MIND is to identify µ+/µ− with a high efficiency and to measure theirmomenta in an interval of 0.3-5.0 GeV/c. In this range the multiple scattering degrades the muonmomentum measurements. Our simulations show that the charge identification can be improved– 1 –Figure 1. Schematic view of the WAGASCI setup. Left — 1: 3D grid-structured WAGASCI wa-ter/scintillator neutrino target; 2: Baby MIND; 3-4: side MRD’s. Right — The event sample of neutrinointeraction in the WAGASCI target is shown.by optimizing the distance between the first magnet planes for the muon momentum down to 500MeV/c. Figure 2 shows the basic design of the Baby MIND. The detector consists of 33 magnetized30-mm thick iron plates and 18 scintillator planes. The magnet modules were designed to provideFigure 2. The layout of BabyMIND. Scintillator planes are numerated from d0 (front plane) to d17, magnetplates are numerated from s1 to s33.a minimum field of 1.5 T over the central tracking region with an uniformity of better than 10%within the iron along the projection of a horizontal plastic scintillator bar. The stray field outside theiron plate is kept below 10 mT. The total power consumption for 33 magnet modules is 12 kW [6].This is derived from the coil resistance and the voltage drop across the power supply. To satisfy the– 2 –space and transportation constraints, the design for the Baby MIND has individual magnetizationof the modules by normal conducting coils wound on the surface of the iron plates. The magnetmodules are made of the ARMCO steel sheets with two horizontal slits machined in the center andare wrapped by an aluminum coil in a sewing pattern, as shown in Figure 3.Figure 3. Two-slit configuration allows to halve the cross sections for flux return, leading to a larger centraltracking region.3 Scintillator modulesThe Baby MIND scintillator module (plane) is assembled by gluing together 95 horizontal and 16vertical scintillator bars which are read out with WLS Kuraray Y11 fibers of 1 mm diameter andsilicon photomultipliers Hamamatsu S12571-025C. The scintillator composition is a polystyrenedopedwith 1.5% of paraterphenyl (PTP) and 0.01% of POPOP. Vertical bar size is 0.7×21×195 cm3,the WLS fiber covers the surface of scintillator in U-shape configuration with both fiber ends drawnat the same end of the bar. Horizontal bars are narrow and longer with 0.7×3×288 cm3 size. Thefiber is glued in the straight groove along the central axis so that readout is implemented at bothends of the bar.In total, 1744 horizontal bars and 315 vertical bars were manufactured at the Uniplast company(Vladimir, Russia). The 0.7 cm thick extruded slabs of 22 cm width were cut in the bars to thespecified size, then the bars were covered by 30–100 µm thick diffuse reflector using etching ofpolystyrene surface with a chemical agent. Details about the manufacturing technology can befound in [7, 8].4 Results of cosmic and beam testsEach bar was tested with cosmic rays to measure the light yield at both ends [9]. A trigger telescopeof two large counters was installed above and below of the central part of the parallel array of 4bars. The same Hamamatsu MPPCs S12571-025C were utilized for the readout. The photosensorsignal after preamplifier was sent to a digitizer CAEN DT5742 with 5 GHz sampling rate, then thecharge was derived by integrating the signal pulse and calibrated in number of photoelectrons (p.e.). We did not apply the correction for MPPC cross-talk so the absolute light yield shown belowis overestimated by 10%. The light yield value was corrected for temperature variations during thetests with normalization to T = 22◦C.– 3 –The average light yield (sum of both ends) was measured to be 37.5 p.e./MIP and 65 p.e./MIPfor vertical and horizontal bars, respectively. Fig. 4 demonstrates the distribution of the light yieldsFigure 4. Left—Distribution of the light yield (sum of both ends) for 315 vertical bars, right—distributionof the light yield asymmetry between the ends.for 315 vertical bars as well as the asymmetry in light yield between the ends. Light yields andthe asymmetry for 1744 horizontal bars are shown in Fig. 5. Light yield asymmetry in both theFigure 5. Left — distribution of light yield (sum from both ends) for 1744 horizontal bars, right —distribution of the light yield asymmetry between the ends.horizontal and vertical bars does not exceed 10%.Data obtained in the beam test at the T9 beam area of the CERN PS have been used to calculatethe detection efficiency. The electronic trigger signal was produced by two trigger counters incoincidence. Figure 6 shows detection efficiency scan for vertical bars. Efficiency and timingresolution for horizontal bars are described in details in a published paper [10].5 Baby MIND softwareBaby MIND uses the Simulation And Reconstruction Of Muons And Neutrinos (SaRoMaN) soft-ware suite [4] to perform event reconstruction of both simulated muon and neutrino events as wellas real beam data. The software suite was developed by the Baby MIND project and has beenqualified with the Totally Active Scintillator Detector (TASD) [9] detector testbeam and will befurther qualified with the Baby MIND testbeam.– 4 –Figure 6. Top—vertical bar test map, bottom left— light yield scan across a bar, bottom right—detectionefficiency scan across a bar (blue – the events are counted if the charge is over the 3 p.e. threshold at eitherof the bar ends (OR logic), green – if the charge is over the 3 p.e. at each of the bar ends (AND logic).6 SummaryThe detector modules of BabyMIND have been assembled and prepared for beam tests at CERN thisyear. The magnetization scheme and assembly procedure have been successfully proven through theconstruction yielding 1.5 T in the magnet modules. The average light yield (sum from both ends)was measured with cosmic rays to be 37.5 p.e./MIP and 65 p.e./MIP for vertical and horizontalbars, respectively.A new Front End Board based on the CITIROC ASIC has been designed for the readout ofscintillator modules that will be used in the Baby MIND muon spectrometer. Ongoing beam testsof Baby MIND modules with the front-end board confirm a high light yield of the scintillator barsand a successful operation of the electronic readout scheme.AcknowledgmentsThe results of section 2 were obtained within European Union’s Horizon 2020 Research andInnovation programme under grant agreement No. 654168. The results of section 4 were obtainedwithin the RFBR/JSPS grant No. 17-52-50038 and the RFBR grant No.16-32-00766.References[1] K. Abe et al. [T2K Collaboration], The T2K Experiment, Nucl. Instrum. Meth. A 659 (2011) 106[arXiv:1106.1238 [physics.ins-det]].– 5 –[2] T. Koga et al. Water/CH Neutrino Cross Section Measurement at J-PARC (WAGASCI Experiment),JPS Conf. Proc. 8 (2015) 023003.[3] A. Cervera et al. Performance of the MIND detector at a Neutrino Factory using realistic muonreconstruction, Nucl.Instrum.Meth. A624 (2010) 601-614.[4] M. Antonova et al., Baby MIND: A magnetized spectrometer for the WAGASCI experiment,arXiv:1704.08079 [physics.ins-det].[5] M. Antonova et al. [WAGASCI Collaboration], Baby MIND Experiment Construction Status,arXiv:1704.08917 [physics.ins-det].[6] G. Rolando et al. New and Optimized Magnetization Scheme for the Baby Magnetized Iron NeutrinoDetector at J-PARC, IEEE Transactions on Magnetics 53 (2017) Issue 5.[7] Yu. Kudenko et al. Extruded plastic counters with WLS fiber readout, Nucl.Instrum.Meth. 469 (2001)340.[8] O. Mineev et al. Scintillator detectors with long WLS fibers and multi-pixel photodiodes, Journal ofInstrumentation 6 (2011) P12004.[9] A. Mefodiev et al. The design, construction and testing of Totally Active Scintillator Detector, PoSEPS-HEP2015:292 (2015) 067.[10] W. Baldini et al. Measurement of parameters of scintillating bars with wavelength-shifting fibres andsilicon photomultiplier readout for the SHiP Muon Detector, JINST 12 (2017) P03005.– 6 –

Baby MIND: A magnetized segmented neutrino detector for the WAGASCI
  experiment

Baby MIND: A magnetized segmented neutrino detector for the WAGASCI experiment

Abstract

Similar works

Full text

Available Versions

Enlighten: Publications

Swepub

Crossref

Swepub

CERN Document Server

Enlighten