This paper presents a modular in-pipeline climbing robot with a novel
compliant foldable OmniCrawler mechanism. The circular cross-section of the
OmniCrawler module enables a holonomic motion to facilitate the alignment of
the robot in the direction of bends. Additionally, the crawler mechanism
provides a fair amount of traction, even on slippery surfaces. These advantages
of crawler modules have been further supplemented by incorporating active
compliance in the module itself which helps to negotiate sharp bends in small
diameter pipes. The robot has a series of 3 such compliant foldable modules
interconnected by the links via passive joints. For the desirable pipe diameter
and curvature of the bends, the spring stiffness value for each passive joint
is determined by formulating a constrained optimization problem using the
quasi-static model of the robot. Moreover, a minimum friction coefficient value
between the module-pipe surface which can be vertically climbed by the robot
without slipping is estimated. The numerical simulation results have further
been validated by experiments on real robot prototype