This thesis investigated some of the eye movement factors related to the development and use of eye pointing devices with three dimensional displays (stereoscopic and linear perspective). In order for eye pointing to be used as a successful device for input-control of a 3D display it is necessary to characterise the accuracy and speed with which the binocular point of foveation can locate a particular point in 3D space. Linear perspective was found to be insufficient to elicit a change in the depth of the binocular point of fixation except under optimal conditions (monocular viewing, accommodative loop open and constant display paradigm). Comparison of the oculomotor responses made between a stereoscopic 'virtual' and a 'real' display showed there were no differences with regards to target fixational accuracy. With one exception, subjects showed the same degree of fixational accuracy with respect to target direction and depth. However, close target proximity (in terms of direction) affected the accuracy of fixation with respect to depth (but not direction). No differences were found between fixational accuracy of large and small targets under either display conditions. The visual conditions eliciting fast changes in the location of the binocular point of foveation, i.e. saccade disconjugacy, were investigated. Target-directed saccade disconjugacy was confirmed, in some cases, between targets presented at different depths on a stereoscopic display. However, in general the direction of saccade disconjugacy was best predicted by the horizontal direction of the target. Leftward saccade disconjugacy was more divergent than rightward. This asymmetry was overlaid on a disconjugacy response, which when considered in relative terms, was appropriated for the level of vergence demand. Linear perspective depth cues did not elicit target-directed disconjugate saccades