Abrahamsen, Asger Bech

Hendriks, Ben

Liu, Dong

Magnusson, Niklas

Polinder, Henk

Stehouwer, Ewoud

A superconducting direct drive generator based on field windings of MgB2 superconducting tape is proposed as a solution by mounting the generator in front of the blades using a king-pin nacelle design for offshore turbines with power ratings larger than 10 MW as investigated in the INNWIND.EU project

Online Research Database In Technology

Design study of a 10 MW MgB<sub>2</sub> superconductor direct drive wind turbine generator

A design study of a 10 MW direct drive wind turbine generator based on MgB2 superconducting wires is presented and the cost of the active materials of the generator is estimated to be between 226 €/kW and 84 €/kw, which is lower than the threshold values of 300 €/kW of the INNWIND.EU project. A nacelle structure with a front-mounted generator is presented for further investigation of the integration of such a superconducting generator into offshore turbines with power ratings considerably larger than 10 MW

                       General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights.  • Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal   If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim.     Downloaded from orbit.dtu.dk on: Dec 17, 2017Design study of a 10 MW MgB2 superconductor direct drive wind turbine generatorAbrahamsen, Asger Bech; Magnusson, Niklas; Liu, Dong; Stehouwer, Ewoud ; Hendriks, Ben; Polinder,HenkPublication date:2014Link back to DTU OrbitCitation (APA):Abrahamsen, A. B., Magnusson, N., Liu, D., Stehouwer, E., Hendriks, B., & Polinder, H. (2014). Design study ofa 10 MW MgB2 superconductor direct drive wind turbine generator. Poster session presented at European WindEnergy Conference & Exhibition 2014, Barcelona, Spain.References Conclusions Nacelle and Generator  Design study of a 10 MW MgB2 superconductor  direct drive wind turbine generator  Asger B. Abrahamsen1, Niklas Magnusson2, Dong Liu3, Ewoud Stehouwer4, Ben Hendriks4 and Henk Polinder3  DTU Wind Energy1, SINTEF Energy Research2, Delft University of Technology3 and DNV-GL4   PO.ID 336  Motivation: The INNWIND.EU project is investigating the feasibility of superconducting direct drive generators for offshore turbines ranging up to 20 MW [1]. A king-pin nacelle design is proposed as template for comparing different generators in terms of cost and cost of energy. Features of the drive train are outlined below: Nacelle  • Static King-Pin and two main bearings supporting hub • P = 10 MW, T = 10.6 MNm @ 9.65 rpm  Generator • Superconducting field coils and conventional  armature winding of Cu • Air-cored armature windings and magnetic steel shielding • Non-magnetic support of  rotor coils • Static superconducting field coils and rotating armature with slip ring • Static cryostat and cryogenic cooling system • Full rated power electronics • D = 5.8 m & L = 3.1 m to match the hub • 32 poles  & f = 2.6 Hz • Bg = 1.5 T, AS = 100 kA/m & Fd = 75 kN/m2 Rotor field coils • MgB2 superconducting tape ( 3.0 mm x 0.7 mm ) @ 4 ( → 1)  €/m [2] • TC = 39 K & minimum bending diameter = 0.15 m • Race track coil as stack of 10 double pan cake coils ( D = 0.3 m )     A design study of a 10 MW direct drive wind turbine generator based on MgB2 superconducting wires is presented and the cost of the active materials of the generator is estimated to be between 226 €/kW and 84 €/kw, which is lower than the threshold values of 300 €/kW of the INNWIND.EU project. A nacelle structure with a front-mounted generator is presented for further investigation of the integration of such a superconducting generator into offshore turbines with power ratings considerably larger than 10 MW. A 10 MW superconducting direct drive wind turbine generator based on MgB2 wire has been analyzed in terms of properties, amount of wire needed and expected cost of the active materials. The diameter is 5.8 m and the active length is 3.1 m. A king-pin nacelle concept with the superconducting generator mounted in front of the rotor blades has been proposed, because it is believed to be one of the only ways to support a rotor approaching 250 m for a 20 MW turbine. Finally a cost of capacity analysis of the generator shows that the contribution from the active materials is 226 €/kW, which is lower than the INNWIND threshold of 300 €/kW. Cost reductions imposed by a decreasing wire price indicate that the expenses of the cryogenic cooling systems can be accommodated. This will be further investigated in the INNWIND project and compared with conventional drive trains.        Abstract       1. Innwind.EU project web page: www.innwind.eu 2. B. B. Jensen, N. Mijatovic and A. B. Abrahamsen, "Development of superconducting wind turbine generators," J. Renewable Sustainable Energy, vol. 5, p. 023137, 2013. 3. A. B. Abrahamsen, N. Magnusson, B. B. Jensen, D. Liu and H. Polinder, "Design of an MgB2 race track coil for a wind generator pole demonstration," in 3P-LS2-07 EUCAS, Genova, 2013. RFe out [m] 2.94  Torque [MNm] 10.6 RArmature out [m] 2.79 Speed [rpm] 9.65 RArmature in [m] 2.73 Poles [2p] 32 RSupercond out [m] 2.69 Frequency [Hz] 2.57 RSupercond in [m] 2.59 Bair gap [T] 1.5 Lgenerator [m] 3.1 Arm. loading [A/m] 105 REnd [m] 0.15 Arm. Fill [%] 50 Wcoil [mm] 84 Shear stress [kN/m2] 75 Hcoil [mm] 80 Efficiency [%]1 97.7 LSC single pancake [m] 740.9 Jcoil [A/mm2] 70 @ 3 Tesla LSC double pancake [m] 1481.7 Jtape [A/mm2] 113 @ 3 Tesla LSC Race track coil [km] 14.82 MCu [kg] 19415 LSC total [km] 474.2 MFe [kg] 24998 Tape unit cost [€/m] 4               ( → 1 ) Mactive [kg] 52331 SC cost [k€] 1897        ( → 474 ) Cost Cu [€] 291234 MSuperconductor [kg] 7918.1 Cost Fe [€] 74994 Mcryostat+cooler [kg] TBD Cost total [k€] 2263     ( → 840 ) Cost cryostat TBD Cost / cap. [€/kW] 226       ( → 84 ) Discussion  • Load line of field coil: JE = 70 A/mm2 in 2.9 T → Toperation ~ 10-15 K [3] • Cost of active material (SC, Cu & Fe) ~ 226 €/kW ( → 84  €/kW ) • < 300 €/kW threshold: 20 % for drive train of 1.5 M€/MW of turbine cost  B[T] 

http://orbit.dtu.dk/ws/files/89914021/Design_study_of_a_10_MW.pdf

Design study of a 10 MW MgB<sub>2</sub> superconductor direct drive wind turbine generator

Abstract

Similar works

Full text

Available Versions

Online Research Database In Technology

Online Research Database In Technology