It was shown that multiaxial forging with continuous decrease of temperature from 450°C to 250°C turns coarse structure of the Mg-0.8Ca alloy in homogenized state with grain size of several hundreeds μm into fine structure with average grain size of about 2.1 μm. Refinement of structure is accompanied by drastic increase of mechanical properties: tensile yield strength increases from 50 MPa to 193 MPa, ultimate tensile strength increases from 78 to 308 MPa and elongation to fracture increases from 3.0% to 7.2%. The microstructural evolution during multiaxial forging is studied using optical microscopy, scanning electron microscopy and EBSD analysis. The mechanisms responsible for refinement of microstructure are discusse
