This thesis proposes a MATLAB Simulink simulator for Photo Voltaic (PV) Array system. The main contribution is the utilisation of a Two-Diode model to represent a PV cell. This model is preferred because of its better accuracy at low irradiance levels. A PV of Kyocera (KC200GT) 50*10 Array is taken & the characteristics curves are plotted. The same simulator can be interfaced with MPPT algorithms & Power Electronics converters for better efficiency. The P-V & I-V Curves of this simulator is found in exact with that given by the manufacturers. It is expected that the proposed work can be very useful for PV professionals who require a simple, fast & accurate PV simulator in order to design their systems. A detailed analysis of a resonant circuit based soft-switching boost-converter for PV applications is also performed. The converter operates at Zero Voltage Switching (ZVS) turn-on and turn-off of the main switch, & Zero Current Switching (ZCS) turn-on and ZVS turn-off of the auxiliary switch due to resonant circuit incorporated into the circuit. Detailed operation of the converters, analysis of various modes, simulation as well as experimental results for the design has also been aptly presented. The systems are modelled & simulated in MATLAB 2013a 64-bit version and the output waveforms are shown
