Presentación para el European Multidisciplinary seafloor and Water‐Column Observatory Eevelopment (EMSODev) Kick-off Meeting, 22-23 September 2015, Heraklion, Crete.-- 10 pagesPeer Reviewe

Dañobeitia, Juan José

Digital.CSIC

EMSODEVKick-off Meeting22-23 September 2015, Heraklion, GreeceWP 4 EGIM shallow water performance assessment and validationJuanjo Dañobeitia (rapporteur)WP 4 ObjectivesObjectives of the WP4Generic: Performs all the necessary testing and validation for  EGIM under shallow‐water conditionsSpecific:– Handbook for test plan and operational procedures – Test EGIM prototype at shallow water Observatories– Develop generic software for sensor web enablementWP Leader: Juanjo Dañobeitia (CSIC) (17 person/month with Third parties UPC 10 p/m & PLOCAN 2 p/m). Partners involved: INGV (3; SET 4), HCMR (2), MI (5), UniHB(5), NERC (4), IPMA( IMAR-MARE 1; FEUP 1,5 CINTAL 05; IST 1),IFREMER (2),GeoEcomare (2), Total 60 p/mWP 4 Interactions with other WP´sWP4 OverviewOverview of the activitiesWP4 activities are primarily concerned with performance testing(shallow and open sea) and therefore operation of EGIM. Initiallythese activities require significant contributions from other WP's todeliver continuous feedback and quality control in each process,following the technical specifications provided by the WP2 (genericinstrument module),and the generic sensors procurement as wellas the design of the prototype Instrument and interface fromWP3. Develop generic software for sensor web enablement. The result will be the final EGIM prototype validated inshallow-water conditions. Input for: WP2 (for revision ofrequirements), WP6 and WP7WP4 Discussion pointsWP4 discussion points • Handbook and test-bench framework: approach– Requires a preliminary index  concerning  all the items involving (wiring, cables, communication, etc.,)– Wp3: Laboratory Dry‐ test, performance, QC and monitoring ?– Wp3: Wet –test procedures, performance, QC and monitoring– Safety and Risk assessment• TEST SITE Location: OBSEA and/or SMARTBAY or other?WP4 early deliverables/milestonesDeliverables & milestones for the first 9 monthsDel./Mil. NoTitle Due date(Project Month)ResponsiblePartner (to be checked)D 4.1 Test plan and operational procedures handbookM-6 February-2016CSIC (2 p/m) and UPC (1, p/m), PLOCAN (1 p/m)D 4.2 Preliminary Release of EGIM Test‐Bench FrameworkM-12 August-2016CSIC (4 p/m) and UPC (2, p/m), D 4.3 EGIM Software Package M-14 October-2016CSIC (7 p/m) and UPC (2 p/m), D 4.4 Final Release of EGIM Test‐Bench FrameworkM16 December-2016CSIC (3 p/m) and UPC (1, p/m), PLOCAN (1 p/m)D 4.5 Shallow‐water testing M16 December-2016CSIC (1 p/m) and UPC (4 p/m), WP4‐ Task, reponsible and timingActivities of the first 9 months Task Name Specific activities for the first 9 months (01.09.2015 -31.5.2016)Who? Dead-LineRelated Task DIVIDE TASK IN SPECIFIC ACTIONS CSIC M6‐ February 2016T 4.1 Primary Test plan and operational procedures handbookHandbook index Objectives EGIM description Scope Technical requierements Power wiring, cables Connectors communications Acoustic modems Testing  approach, initial test estimates schedule, timing safety and risk assesment environment QC Deliver : ResultsCSIC-UPC (5p/m)INGVIFREMERNERCMIUniHBIPMAGeoEcoMarWP4‐ ActivitiesActivities for the next 9 months: to be discussedActions mandatory: To create a shared document (google drive)  To start with a table identifying the responsible from each partner To write the index of the handbook To assign the sections to the corresponding responsible Identify dependencies and requirements: Deliverable D2.2 Preliminary Technical specifications of the EGIM will be released on M8 (two months later than D4.1). The  EGIM technical specifications should be already determined (and mentioned) in D4.1 To define generic functions, generic sensor models, and establish/determine the protocol to communicate with the EGIM SOS Gateway requirements for Data Management Platform (to be implemented in WP6)WP4 Activities‐DependencesD4.1 will depend on partial results of D2.2 !WP4“Criticalities” the EGIM will be released on M8 (two months later than D4.1). The  EGIM technical specifications should be already determined (and mentioned) in D4.1. EGIM test at Shallow and Open sea ? Risk´s ?

EGIM shallow water performance assessment and validation

Abstract

Similar works

Full text

Available Versions

Digital.CSIC