University of Ljubljana, Faculty of Civil and Geod
Abstract
Fire resistance of unprotected steel structures is very low and steel elements must be protected from fire. One possibility is to create a protective layer of a cement-based material. Most types of cement have a low resistance to high temperatures, reducing mechanical properties. In flammability tests, cement activated with alkaline compounds showed better properties compared to conventional types of cement. This paper represents the determination of the properties of two H-Cement mortars with experlite or fireclay sand. Experiments carried out in a small kiln simulating a 1D load showed differences between elements in terms of heat transfer to the tested elements. The calculation model created to predict the course of the experiments has been validated and the unknown properties of the material have been calculated based on the data collected. The samples were tested in a small fire furnace. Finally, the thermal conductivity pattern was determined depending on the temperature
