Recovery of high grade iron compounds from LD slag by enhanced magnetic separation techniques

Abstract

International audienceA representative sample of LD slag provided from French steel industry was treated by different physical separation techniques especially used in mineral processing. The results of characterisation study show that the LD slag may contain up to 35% of iron compounds. The X-ray diffraction reveals the presence of the following crystallized mineral phases: CaO, MgO, Al2O3, SiO2, MnO, and P2O5. Larnite (Ca2SiO4), di-calcium aluminoferrite (brownmillerite: Ca2Fe2 - xAlxO5 with x = 0.6) and a solid solution (Fe, Mn, Mg)O structurally close to the wustite (FeO) and some residual lime (CaO).The results of grinding tests show that the manner of grinding is very important. Soft Grinding (SG) or sequential grinding is most suitable to reduce the particle size of LD slag avoiding the overproduction of fine particles, which hinder the effectiveness of magnetic separation techniques. The combination of Low and High Intensity Magnetic Separation (LIMS and HIMS) of ground LD slag at 63 mu m in wet process may recover ferromagnetic particles (iron oxides) at LIMS and paramagnetic particles at HIMS, while the non-magnetic fraction contains mostly calcium silicates.From this investigation, two flow-sheets of treatment of LD slag are suggested to recover high grade iron material for recycling in metallurgical processes. Calcium and silicon oxide rich product will be directed to the cement industry