Vysoká škola báňská - Technická univerzita Ostrava
Abstract
Práce byla zaměřena na racionalizaci výroby matrice střižníku, který je využíván
při lisování. Tato matrice střižníku je umístěna v nástroji, který obsahuje několik
takovýchto matric. Původně byla tato matrice z důvodu složitosti vyráběna na starším
elektroerozivním stroji. Kvůli časté výměně těchto matric se klade důraz na zvýšení
přesnosti a kvality s ohledem na udržení nebo snížení výrobních nákladů. Původní
zastaralé stroje dosahovaly dostatečných přesností, ale při dosažení vyšší kvality a
přesnosti dosáhneme zvýšení životnosti nástroje.
V teoretické části bude pozornost věnována podstatě a principu nekonvenčních
principů obrábění, a to převážně elektroerozivnímu obrábění.
Praktická část diplomové práce bude zaměřena na volbu strojů, druhy řezných
drátů, volbě optimálních podmínek pro nekonvenční obrábění a výsledné jakosti
povrchu. Bude posuzován vliv volby stroje, řezných podmínek, technologii postupu na
výslednou výrobu matrice.
V závěrečné části diplomové práce bude posuzováno technicko – ekonomické
zhodnocení a vyhodnocení volby stroje na výrobu matrice střižníku.his thesis was focused on the production rationalization of Die Punch, which is
used during the pressing. This matrix is placed in a punch tool which contains several
of these matrices. Originaly was this matrix manufactured on an older type of machine,
because of the complexity of the process. The main emphasis, due to the frequent
replacement of these matrices, was placed on increasing the accuracy and quality with
regard to maintaining or redcing the cost of production. Original old machines
achieved sufficient accuracy, but we are able to achieve a longer life service of a tool
at a higher quality and accuracy. The work was focused on the rationalization of production punch matrix, which is used during pressing. This matrix is placed in a
punch tool that contains several such matrices. Originally the matrix, because of the
complexity electro manufactured on older machines. Due to the frequent replacement
of these matrices with emphasis on increasing the accuracy and quality with regard to
maintaining or reducing production costs. Original obsolete machines achieve
sufficient accuracy, but at a higher quality and accuracy achieved an increase in tool
life.
The theoretical section will focus on the essence and principle of non-conventional
machining, mostly elektroinvasive machining.
The practical part is focused on the choice of machine, types of cutting wires, the
choice of optimal conditions for unconventional machining and the resulting surface
finish. The influence of elections machines, cutting conditions, the technology of
progress will be considered to the final production of the matrix.
In the final part of this thesis, the technical – economic evaluation and assessment
of election machines of Die punch will be considered.346 - Katedra obrábění, montáže a strojírenské metrologievýborn