Life cycle assessment in the development of forest products: Contributions to improved methods and practices

Abstract

<p>The prospect of reducing environmental impacts is a key driver for the research and development (R&D) of new forest products. Life cycle assessment (LCA) is often used for assessing the environmental impact of such products, e.g. for the purpose of guiding R&D. The aim of this thesis is to improve the methods and practices of LCA work carried out in the R&D of forest products. Six research questions were formulated from research needs identified in LCA work in five technical inter-organisational R&D projects. These projects also provided contexts for the case studies that were used to address the research questions. The main contributions of the research are as follows:</p> <p> Regarding the planning of LCA work in inter-organisational R&D projects, the research identified four characteristics that appear to be important to consider when selecting the roles of LCAs in such projects: (i) the project’s potential influence on environmental impacts, (ii) the degrees of freedom available for the technical direction of the project, (iii) the project’s potential to provide required input to the LCA, and (iv) access to relevant audiences for the LCA results.</p> <p>Regarding the modelling of future forest product systems, it was found that (i) it is important to capture uncertainties related to the technologies of end-of-life processes, the location of processes and the occurrence of land use change; and (ii) the choice of method for handling multi-functionality can strongly influence results in LCAs of forest products, particularly in consequential studies and in studies of relatively small co-product flows.</p> <p>Regarding the assessment of environmental impacts of particular relevance for forest products, it was found that using established climate impact assessment practices can cause LCA practitioners to miss environmental hot-spots and make erroneous conclusions about the performance of forest products vis-à-vis non-forest alternatives, particularly in studies aimed at short-term impact mitigation. Also, a new approach for inventorying water cycle alterations was developed, which made it possible to capture catchment-scale effects of forestry never captured before.</p> <p>To connect the LCA results to global challenges, a procedure was proposed for translating the planetary boundaries into absolute product-scale targets for impact reduction, e.g. to be used for evaluating interventions for product improvements or for managing trade-offs between impact categories.</p