Uppsala universitet, Institutionen för teknikvetenskaper
Abstract
This thesis work includes studies and simulation how magnetization of the translator in a linear generator for wave power can be automated. The translator is the moving component in the generator that is "dressed" with permanent magnets. The translator is magnetized with rectangle-shaped permanent magnets that are today's strongest permanent magnet type of neodymium-iron-boron (NdFeB). Eight equivalent metal sheets are mounted around the translator. The plates have milled tracks where 106 permanent magnets per sheet are mounted. Today the assembling of the magnets is done by hand, which is a very tedious and time-consuming work. This project presents investigations about the automation of the translator magnetization theoretically and simulation results are preformed in ABB's robot simulation software RobotStudio. Even robot-held tool was designed that enables the robot to be able to magnetize the translator in a simple manner. The investment cost is roughly 1.5 million SEK. With an economic life-time of five years, the investment costs are estimated to 24000 SEK / month. According to the calculations, this project is very motivated to implement, as it provides savings up to 17 000 SEK per translator which is 10.2 million SEK assuming that the robot cell is operating at full speed the whole year. According to this thesis work the result is a 4x9 meter cell with two industrial robots of the type ABB IRB6650S. The cycle time to magnetize one translator was calculated to about 10 hours. This prototype of project can possibly be implemented in a full-scale production line and performed according to the calculations and simulations presented in the report. Further work is suggested to improve the tool.Lyssna