Universidad Nacional de Cuyo. Facultad de Ciencias Agrarias
Abstract
En la madera de clones de sauce (Salix
spp.) la longitud de fibra, que está asociada
con su aptitud papelera, varía ampliamente
en el mismo árbol. En algunas especies se
ha comprobado diferencias entre la médula
y el exterior -a lo largo de ejes radiales (variación
radial)- y longitudinales, entre la base
del tronco y la parte superior (variación axial).
La determinación de dichas diferencias permitiría
localizar muestras útiles para evaluar
la calidad de árboles completos, utilizables
en la industria celulósica.
Por tal motivo se han estudiado en 8
clones de sauces de 13 años extrayendo
material a 3 distintas alturas en el fuste: 1,3;
4,3 y 6,5 m. En cada una de ellas se tomaron
muestras de 3 posiciones radiales correspondientes
a las edades, en años: 3-4 (interna),
6-7 (media) y 10-11 (externa). Se midió
el largo de 30 fibras por posición sobre
material disociado. En el sentido radial se
verificó -en todos los clones y a todas las
alturas- un aumento de la longitud de fibra
desde el interior hacia el exterior. Para la variación
axial se registró una tendencia general
de disminución desde las secciones inferiores
a las superiores.Fiber longitude is a property of the
willow (Salix spp.) wood, associated to its
paper aptitude and it can vary significantly
within the same tree. In several species,
these variations were noticied between the
pit and the exterior along the radial axes (radial
variation) and longitudinal axes between
the botton of the trunck and the upper part
(axial variation). Acknowledging that these
variations would facilitate the location of
useful samples for quality evaluation of all
the clones, used for paper industry.
The aim of this work was to study axial
and radial variations of fiber longitude in 8
clone stems of 13 year old willows. Material
from 3 different stem heigths was taken from
each clone at 1,3; 4,3 and 6,5 m. For each of
these heigths, samples of 3 radial positions
corresponding to the ages, in years: 3-4
(internal), 6-7 (medium) and 10-11 (external)
were obtained. The length of 30 fibers was
measured againts dissociated material. As
regards the radial aspect, an increase in
fiber longitude from the inside to the outside
was noticed in all the clones and at all
heigths. For axial variation a general
decreasing tendency from lower sections
towards the upper ones was recorded.Fil: Marlats, Raúl M..Fil: Senisterra, Gabriela E..Fil: Marquina, Jorge L..Fil: Monteoliva, Silvia.Fil: Ciocchini, Gabriel R.